We Finance!!! 2007 Cadillac Cts Auto Tiptronic Roof Heated Seats Onstar Bose!!! on 2040-cars

Auto blog

Expect the Cadillac XT3 small crossover in late 2018

Cadillac's sedan-heavy lineup can't complete in this crossover-crazy market, it seems. The Detroit News spoke to Cadillac boss Johan de Nysschen and found out some more details about the brand's plan to alter its lineup to cater more to current consumer tastes. It's no surprise that these plans would include a small crossover, because de Nysschen has been talking about a vehicle smaller than the XT5 like this since at least 2015. The report also pins the Fairfax Assembly Plant, where GM builds the Buick LaCrosse and the Chevrolet Malibu, as the site for what could be called the XT3's production. That's not an immediately obvious choice, since the LaCrosse and Malibu are based on the latest evolution of the Epsilon platform, known as E2XX. And the XT5 is based on a crossover version of that same platform (known as C2XX), while XT3 is expected to be smaller than the XT5. So perhaps there's a different assembly line going into Fairfax, or the C2XX platform can be significantly shortened. We assume that the XT3 would be built on a smaller platform, perhaps the Gamma II that underpins the Chevrolet Trax and Buick Encore – which are built in either South Korea or Mexico, depending on which market they are to be exported to. The Encore is selling very well for Buick, with sales figures increasing through late last year. Another possibility is the D2XX platform that underpins the Chinese-built Buick Envision and the GMC Terrain and Chevrolet Equinox, perhaps with assembly happening at the CAMI plant in Ontario. At this early stage, without confirmation of GM as to what platform the XT3 will use or where it will really be built, it's too early to say what the Fairfax rumor means. This isn't the first time we've heard about a small Cadillac crossover. Back in 2015, de Nysschen told us to expect it sometime in 2018. But later that year, speaking to Reuters, he posited that it'd be closer to 2019. The Detroit News says de Nysschen told them it'll launch in the second half of 2018, splitting the difference between what we'd heard previously. Remember, Cadillac's only two vehicles in the segment are the XT5 and Escalade. We know that the brand is almost certainly scrambling to fill the holes in that side of the lineup. We think a three-row crossover will slot between the two, probably called the XT7.

Cadillac CT6 PHEV battery shape a big departure for GM's plug-in hybrid tech

Anyone with any familiarity with the electric powertrain details for the two General Motors plug-in hybrids will have noticed that the information we have about the newly announced Cadillac CT6 plug-in hybrid has a lot of numbers in common with the Chevy Volt and the Cadillac ELR, like the 18.4-kWh lithium-ion battery pack and an expected all-electric range of 37 miles. We also noticed that the announcement calls the plug-in CT6 hybrid an actual plug-in hybrid and not an "extended range electric vehicle (EREV)," which is what GM calls the Volt and the ELR. This, of course, means we needed to ask GM some questions. Donny Nordlicht from Cadillac communications told AutoblogGreen that while the Volt and CT6 batteries are both 18.4-kWh, the shape is completely different. In the Volt/ELR, the battery is T-shaped (see it here). The CT6 has four seats, with a tunnel running between the two in the rear, as you can see here, but the battery in the CT6 PHEV is "a cube-shaped pack, which is between rear seats and the trunk," Nordlicht said. "There is no pass through." GM has not yet released any technical schematics about this pack, but Nordlicht said that, "The CT6's advanced mixed-material platform was designed to accommodate the PHEV system by design so that it minimally intrudes on the cabin space." It also means that the CT6 can be ordered as an optional PHEV, while the Volt and ELR were purpose-built plug-ins. GM is also distinguishing between the EREV and PHEV powertrains in its vehicles from this point forward. "We are not discarding the EREV language," Nordlicht said. "The CT6 utilizes a two-motor system mated to a 2.0T 4-cylinder engine, which is an all-new system to Cadillac." We assume that the PHEV packs will use li-ion cells from LG Chem, just like the EREVs do, but Nordlicht did not answer our question on that point. As for other details about the CT6 PHEV – like production, full dimension, and pricing – we will just have to wait until closer to when the vehicle launches for those. Related Video:

NHTSA approves hybrid rearview mirror display in Cadillac CT6, Bolt EV

The Chevy Bolt EV prototype doesn't just have a fancy new all-electric powertrain. Just outside the driver's line of sight is a newfangled rearview mirror, one that can turn into a screen that shows a moving image from the rear-facing camera. Speaking to NPR's Robert Siegel yesterday, Department of Transportation secretary Anthony Foxx said that NHTSA has now approved this type of mirror/screen for use in vehicles. According to a letter from NHTSA to General Motors, GM will likely use this Full Display Mirror first in the 2016 Cadillac CT6 before coming to the Bolt. In its letter to GM, NHTSA said that the Full Display Mirror will only qualify as a standard rearview mirror as long as there are normal side mirrors in place. In other words, don't expect to see cameras and screens replacing all the mirrors in a motor vehicle just yet. @AutoblogGreen @NPR - #NHTSA has OK'd GM rear-view system that can switch between mirror & camera views. pic.twitter.com/6CBeIit10v — Anthony Foxx (@SecretaryFoxx) February 22, 2016 The Full Display Mirror was developed by Gentex, which has long worked with GM. The FDM debuted in 2014 and some people hoped it would also make its way into the Tesla Model X. Gentex, which also makes auto-dimming mirrors, says that it has "set out to develop the technologies and core competencies necessary to manage this evolution of the rearview mirror." The Chevy Bolt EV will start at $37,500, before incentives. The 200-mile EV will go into production late this year for likely sale in early 2017. Related Video: