Navigation Performance Climate Seats on 2040-cars

Auto blog

Genesis wins J.D. Power Tech Experience Study for third straight time

The results are out for the J.D. Power 2023 U.S. Tech Experience Index (TXI) Study, which "focuses on the user experience with advanced vehicle technology as it first comes to market and is an early measure of problems encountered by vehicle owners." Its measurement metric is problems per 100 vehicles (PP100), same as with the J.D. Power Initial Quality Study (IQS). The takeaway this year isn't that owners aren't using advanced technologies, as was the case with the 2022 study, or that they're having more problems with them overall. It's that owners of battery-electric vehicles are having more problems with advanced tech than owners of ICE-powered vehicles. According to the study, 17 of 21 features that can be had on both propulsion types — such as remote parking assistance and gesture controls — get lower satisfaction ratings by owners of BEVs, in some cases nearly 20 PP100.  The survey organization says this tracks with what its found in the IQS, where total vehicle problems were "46% higher among BEVs (excluding Tesla) than ICE vehicles and satisfaction is lower among owners of BEVs across nine of 10 APEAL categories than among owners of ICE vehicles." Findings regarding biometric measurements are among those that go against the overall study findings. Whether a fingerprint reader or an eye tracker, car owners in general said "they do not consider them to be useful." In terms of ease-of-use and satisfaction, plug-and-charge capability on EVs gets good marks. This allows EV owners to plug into a public charger and have payment taken care of automatically; the vehicle communicates with any charging station compatible with an automaker's plug-and-play system, so the vehicle can automatically submit a bill for the charging session to a central owner account with no further action needed at the station. Survey respondents noted a mere 6 PP100 and an 88.9% satisfaction.    Among manufacturers, repeat winners took the top prizes. Genesis earned the highest rank for innovation overall and among premium brands for the third straight year. Hyundai not only won the tech innovation banner for mass market brands for the fourth straight year, ahead of Kia, GMC, Ram and Subaru, Hyundai finished in second in the overall standings. On that overall chart, the top five are Genesis, Hyundai, Cadillac, Lexus and BMW. On the premium chart, Genesis is followed by Cadillac, Lexus, BMW and Mercedes-Benz in the top five. It wasn't close from the first to the rest, though.

2019 Autoblog Technology of the Year finalists revealed

Every fall, we line up a range of new models with the latest and most compelling automotive technology from the past year. We test everything from semi-autonomous systems like Tesla's Autopilot to trick suspension setups like the Multimatic spool-valve shocks on the Chevy Colorado ZR2. We spend months paring down the list to a small group of contenders. After testing, dinner and healthy debate, we tally up the votes and name our winner. For Autoblog's 2019 Technology of the Year Award, our three finalists are the Cadillac CT6 with Super Cruise, the Infiniti QX50 with Variable Compression Turbo and the Mercedes-AMG E 53 with EQ Boost. Super Cruise is an advanced SAE Level 2 semi-autonomous system, though Cadillac (unlike some of its rivals) is reluctant to push that point. Cadillac would like you to think of this as an advanced driver assistance feature rather than a semi-autonomous system. Super Cruise allows completely hands-free highway driving. Thanks to a driver-facing camera, the system forces the driver to keep his or her eyes on the road even if hands are off the wheel. Although the CT6 is being discontinued, look for Super Cruise to make its way to other Cadillacs soon. VC Turbo is a little more complicated. Basically, Infiniti's 2.0-liter turbocharged inline-four can vary the compression ratio on the fly. In general, turbocharged engines are more efficient than naturally-aspirated engines when on boost, but can perform worse at low revs. VC Turbo allows for a best-of-both-worlds situation, increasing the compression at low revs and backing it off once the turbo spools up. The best part is that it does so seamlessly, with only a dash readout letting you know what's going on under the hood. Our third finalist is the EQ Boost 48-volt system in the Mercedes-AMG E 53. Like VC Turbo, EQ Boost does a lot just beneath the surface. Mercedes has developed a new turbocharged 3.0-liter inline-six and paired it with a small electric motor. While the car can't run on electricity alone, the motor helps improve both efficiency and performance, smoothing shifts and filling in low-end torque before the turbos spool up. Think torque fill, similar to a McLaren P1. Who can complain about better fuel economy and more torque? Look for the 48-volt system to make its way into most of the Mercedes-Benz lineup. The winner will be revealed next week on Autoblog, and we'll present the award Jan. 15 at the Detroit Auto Show. Related Video:

Our favorite mid-engine Corvette theories and rumors

The mid-engine Corvette! We just saw blurry photos through the foliage, and are hearts are all aflutter because it means that this car is real. And it's the most " never before" Corvette since 1984. Which leads us to all kinds of wacky theories and speculation. Everybody knows something or heard from a guy. None of those guys (or gals) from GM are talking to Autoblog, to be clear. But that won't stop us from stirring the pot. Let's go over a few point-by-point. The pushrod engine will be replaced by an overhead-cam V8 Car and Driver has repeatedly reported that an overhead-cam engine will come after the mid-engine Corvette's debut with an old-school pushrod. We've heard the same thing firsthand, albeit from a source with no connection to the development of the Corvette or powertrain. "At some point two valves can't pass future emissions regulations," said the guy we know. While the pushrod engine is compact, the design makes it difficult - if not impossible - for sophisticated variable valve timing (and lift) systems that control combustion with more precision. Hasty conclusion: The pushrod engine has a finite life in front of it. This one's a lock, it's a just a matter of when. Bowling Green's new paint shop is really the mid-engine assembly line Credit to Reddit for this one. Like we said, everybody knows a guy. But let's look deeper. The new paint facility costs $439 million dollars and adds 450,000 square feet, almost half the size of the existing plant. Plus GM announced another $290 million in upgrades at Bowling Green Assembly. That sure sounds like a lot of money, but you can actually spend that much on a paint booth. Porsche spent 500 million Euros (about $561 million dollars) to add the Macan assembly to its Leipzig, Germany plant in 2014. Chrysler shelled out $850 million for a paint shop in Sterling Heights, Michigan. GM spent $600 million for a new paint shop at the Fairfax (Kansas City) plant. Honda, on the other hand, is working on a thrifty $210 million project in Marysville, Ohio that includes a 300,000 square foot expansion, and the low-volume Acura NSX facility only cost $70 million. Hasty conclusion: The square footage and cost could easily mean a new assembly line instead of (or in addition to) a paint line. And if the NSX plant was really that cheap, GM could have hidden a similar sum in its existing announcements.