3.6 Ltr V-6, Bluetooth, Leather, Homelink, Bose, 40 Gig Hard Drive, Ipod, Camer on 2040-cars

Auto blog

Buy a Mosler Twinstar, the V16 Cadillac you almost wanted [w/video]

Cadillac was once famous for opulent, V16 luxury vehicles, but this bizarre 16-cylinder 1999 Eldorado that's for auction on eBay Motors isn't much like its ancestors. Dubbed the TwinStar, this beast features a Northstar V8 with 275 horsepower to drive the front wheels and a second Northstar with 300 hp is in the trunk to spin the rear axle. Each mill has its own four-speed automatic gearbox, and the result is a total of 575 hp of all-wheel drive fury in an incredibly weird package. The TwinStar's interior and exterior certainly don't hide the odd powertrain setup. To fit the engine in the trunk, the builders pushed the rear wheels further back and lengthened the wheelbase. There are also scoops low on each side to funnel air to the V8. Inside, there's a second ignition on the side of the center stack, and a digital instrument cluster replaces the glove box. It's sure to confuse any passenger you can convince to take a ride in this thing. Mosler, the supercar company known for models like the MT900, built five TwinStars, according to the auction. The seller links to the original review by Car and Driver, and the magazine noted that the sensation of the two engines working in tandem was rather odd. However, the TwinStar was a capable performer and ran to 60 in 5 seconds in its test. If you want to start your new year with the oddest vehicle possible, the TwinStar's auction sits at $5,600 with the reserve not met as of this writing, and it ends January 2, 2016, at 8:00 PM ET. If you can't wait that long, the dealer lists the car online for $39,900. There's also a spirited conversation on Bring a Trailer about this automotive oddity.

GM recalls 61k more vehicles in three campaigns

Following a stop-delivery order for its new midsize trucks and a rash of recent recalls, General Motors is issuing three more campaigns covering 60,575 vehicles in North America with 57,182 of them in the US. As of October 1, the automaker has issued a total of 74 recalls (see the ridiculously long chart to the right) this year covering 26,495,070 units in the US.
The largest campaign covers 46,873 examples in the US of the 2008-2009 Pontiac G8 and 2011-2013 Chevrolet Caprice Police Patrol Vehicle imported from Australia. It's possible for the driver's knee to hit the key and make it move from the "Run" to "ACC" position while driving. GM says its Holden division is developing a fixed-blade key that's supposed to fix the problem by only allowing it to rotate toward the "On" position. There has been one crash caused by this fault but no injuries or fatalities.
The second recall is for 10,005 units of the 2004-2007 Cadillac CTS-V and 2006-2007 Cadillac STS-V because "the fuel pump module electrical terminal may overheat." This can cause a flange to melt and allow the pump to leak fuel. GM specifies that the remedy for the CTS-V is replacing the fuel module and fuel tank jumper harness, but it doesn't specify how the STS-V is being repaired.

Cadillac CT6 uses aluminum to save 200 pounds

In Cadillac's recently launched ad campaign, the luxury brand's tagline is "Dare Greatly," and the two words suggest a brand willing to take big swings, even if they don't always connect. From what the company is promising, the forthcoming CT6 seems like an embodiment of that new motto. With an eventual range of turbocharged engines, reportedly including a turbo V8, a possible plug-in hybrid and streaming rearview mirror, the sedan is certainly pitched as tech showcase. Of course, extensive use of aluminum is practically mandatory to play in the luxury field these days, and Caddy is proving its latest creation can do that too. Despite the weighty appearance of the sedan's squared-off exterior, 64 percent of the CT6 is aluminum, including the entire exterior. Caddy claims that using so much of the lightweight metal sheds 198 pounds off the scales compared to using conventional steel. There still is some steel in the CT6; although it's predominately the high-strength variety. The engineers use the heavier metal for portions around the cabin and B-pillar for added safety. Cadillac also claims using steel "close-out panels" on lower portions of the sedan make the cabin quieter without needing as much sound deadening. The buildup to the CT6's public unveiling has been a long time coming after Cadillac pinned the flagship (for now) sedan's debut at the New York Auto Show nearly a year ago. When the sheet finally comes off on March 31, we get the first good idea about just how great Caddy's latest act of daring really is. Cadillac CT6 Elevates the Science of Mass Efficiency 2015-03-13 Technology DETROIT – Cadillac will use an advanced mixed-material approach for the lightweight body structure of the upcoming CT6 range-topping sedan. The structure is aluminum intensive, but the new Cadillac also includes 13 different materials customized for each area of the car to simultaneously advance driving dynamics, fuel economy and cabin quietness. The CT6 will debut March 31 at the New York International Auto Show and go into production late this year at General Motors' Detroit-Hamtramck assembly plant. "This is the rocket science of automobile construction and manufacturing today," said Cadillac President Johan de Nysschen.