Navigation Navi Awd 4x4 Heated Power Leather Seats Power Sunroof Third Row Seat on 2040-cars

Auto blog

All-new 2019 Cadillac XT4 crossover debuts in New York

Cadillac spent years and years improving its mainline sedans, the CTS and ATS, turning them into awfully good impressions of BMWs from a few years before. The thing is, great sedans aren't selling, and crossovers sure are. Cadillac's XT5 is the only crossover in the lineup, something that's had American Cadillac dealers gnashing their teeth and wailing — although anyone they can upsell into an Escalade can staunch the bleeding. That brings us to the new XT4, which is smaller than the XT5 but even sharper than its bigger sibling. Let's take a closer look at this new two-row luxury crossover. For one, it's based on what Cadillac calls a unique platform. That may be true, technically, although it's likely related to the Equinox/Terrain on some level. Platforms are becoming quite flexible: Look at Volkswagen's MQB, under everything from Euro hatches smaller than our Golf to the three-row Atlas. Whatever else it is underneath the skin, all XT4s will share one powertrain: the corporate 2.0-liter turbocharged inline-four, paired to a nine-speed automatic transmission. View 14 Photos The engine puts out a healthy 237 horsepower and 258 pound-feet of torque, putting it just a hair underneath its closest domestic rival, the Lincoln MKC with the 2.0-liter EcoBoost. Of course, the 2.3-liter MKC beats the XT4 handily, but that's another story. Power is produced with the help of a twin-scroll turbocharger. All-wheel drive is available, with a driver-selectable rear axle disconnect to save a small amount of rolling friction. Cadillac estimates it'll be good for 30 MPG on the freeway, but we haven't seen official results to confirm that. A few other changes that'll affect driving: electro-hydraulic brake assist, a first for Cadillac and mainly a fuel-saving measure; and Continuous Damping Control, which alters the damper's valve continuously based on a number of parameters. It's almost certainly used here because it's lighter and less expensive than air suspension or MagneRide, and it is optional on XT4. CDC or no, all XT4s utilize a front strut and five-link rear suspension. All XT4s also ride on 18-inch wheels in various designs. The trim strategy is mildly interesting. The base model is the Luxury, and then you can choose a Sport (black exterior trim, unique wheels) or a Premium Luxury (bright trim and satin-brushed accents). The interior options are suitably upscale and premium, and we'll have more to say about them a little later when we can see this car up close.

2017 Cadillac CTS-V Drivers' Notes | V is for velocity

The 2017 Cadillac CTS-V is as close to a four-door Corvette Z06 as you're ever likely to get. Underneath the carbon-fiber hood rests one hell of an engine, a 640-horsepower supercharged V8. It's only slightly less powerful than what you'll find in the Corvette. Thanks to GM's chassis wizards, the car's handling is an equal match for the powerful engine. This particular car packs in a number of options, including Recaro seats and the performance data recorder that allows owners to measure lap times and record video. The most expensive option is the $6,950 Carbon Black Package. This nets you a carbon fiber hood vent, front splitter, spoiler and rear diffuser. This car isn't cheap, but it does undercut the less powerful Audi RS7 and Mercedes-AMG E63 S. Associate Editor Joel Stocksdale: This is a seriously fun, if also flawed, car. And the biggest contributor to the fun is the big lump of V8 under the hood. The supercharged 6.2-liter makes 640 horsepower, but Cadillac could've left the number off and just called it "effortless." The gentlest pressure on the gas pedal will result in you picking up an extra 10 mph without ever noticing. And when you stomp on it, you get this huge and immediate surge of acceleration. It's truly giggle-inducing. Although the CTS-V is big and heavy, it handles the power well. It gives you enough info on what's happening so you feel in control, and the chassis is impressively composed. The only real weak points I can find on the CTS-V (besides the low gas mileage) are the interior controls. They are abysmal. The infotainment screen is pretty poor, with a clutter of information at the main screen, and difficult-to-find commands for getting to other menus. But worse than that are the climate and volume buttons. They're all touch-sensitive spots on the center stack. They're not very responsive, and the vibratory feedback it provides isn't noticeable while driving. It doesn't help that the feedback feels pretty inconsistent, too. For me, I think I could learn to live with the infotainment, simply because I love the way the rest of the car feels and drives. But, Cadillac, you need to get to updating this ASAP. Associate Editor Reese Counts: OK, Cadillac's infotainment system sucks. Let's get that out of the way. Touch capacitive interfaces don't work well in cars. This does have the old version of CUE, so I'm hoping the next-gen system will fix some of the interface issues. Like Joel, this wouldn't turn me off from buying the car.

Cadillac is returning to endurance racing with a new prototype in 2017

In two months, Cadillac will return to top-tier endurance racing with its all-new Daytona Prototype International racecar after 14 years away. The car, which adheres to IMSA's new DPi regulations, looks as long, low, and Cadillac-like as anyone could have hoped. It's set to debut at the Rolex 24 at Daytona and will compete head to head with the likes of Mazda and Nissan in what is shaping up to be one of the most diverse and exciting forms of American motor racing in years. The new car will be run by Wayne Taylor Racing, the team that previously fielded the Corvette Daytona Prototype. Wayne Taylor himself has won the 24 Hours of Daytona twice, in 1996 and 2005. He now manages the team and leaves the driving duties to his two sons, Ricky and Jordan. They'll be joined in the cockpit by Max Angelelli, Wayne Taylor's teammate in 2002 at Cadillac's last unsuccessful attempt at endurance racing. To understand Cadillac's new car, officially called the DPi-V.R., you need to understand IMSA's DPi category. Basically, manufacturers are allowed to base their car on one of four chassis that follow the FIA LMP2 regulations. The chassis come from either Dallara, Onroak Automotive, ORECA or Riley/Multimatic. Cadillac will base their car on the Dallara platform. The DPi regulation differ from the LMP2 in two major ways: non-standardized engines and the ability to change certain parts of the bodywork. The DPi regulations are intended to give the variety of the top-tier LMP1 cars at a fraction of the cost. When it came to choosing an engine, Cadillac wanted to power the new car with something kinda sorta production based. The new car will use a naturally aspirated 6.2-liter pushrod V8 that shares some base architecture with the engine in the current CTS-V. While the power output hasn't been announced, expect about 600 horsepower. While that's down compared to the CTS-V, there is far less mass to move around as the Dallara chassis is a svelte 2,050 lbs. Since all the teams will be running different engine configurations, expect restrictors of some sort to help balance the power disparity. The parts of the body work that can be modified - The nose, sidepods, rear wheel arches and rear valance - have all been designed to mimic Cadillac roadcar design elements. Even the wheels look like they were pulled straight from the CTS-V. The front splitter, the floor, and the diffuser are common elements shared with other DPi cars.