1996 Cadillac Fleetwood Lt1 77k Miles Southern Belle One Owner on 2040-cars

Auto blog

Cadillac prepares to top its own 'Ring record with upcoming new CTS-V

It was a big deal back in 2008 when the original Cadillac CTS-V clocked a lap time of 7:59 at the Nürburgring, making it the fastest sedan ever to lap the Nordschleife to that date. Not many four-doors have bested that time since - the list consisting pretty much only of the Porsche Panamera Turbo - but now hot hatches are lapping faster than that, so you can bet that the new one will manage an even better time.
Now we've spotted the upcoming new CTS-based performance sedan several times before undergoing testing in locations around the world, but this is the first time we've seen it at the Nürburgring, apparently using the Goodyear Dunlop test facility as its base of operations (and still wearing Michigan manufacturer plates, incidentally). Considering how well the outgoing CTS-V performed and how much further you can bet Cadillac will push the envelop this time around, a new sedan lap record is almost a certainty - and we can only hope for an all-out war between Europe's performance sedan power houses to ensue.

Cadillac calling in 4,900 CTS-V models for brake issue

General Motors is recalling just over 4,900 first-generation Cadillac CTS-V sedans built between September 6, 2003 and June 11, 2007. The affected vehicles are largely registered in cold weather states where rock salt is used on roads. The salt could corrode the front brake hose's fitting in the brake calipers, which could lead to a brake fluid leak, the National Highway Traffic Safety Administration's bulletin reads. Needless to say, that would make slowing down the Corvette-powered Caddy a challenge. The affected vehicles were registered and/or sold in the following states: Connecticut, Delaware, Illinois, Indiana, Iowa, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, West Virginia, Wisconsin, and the District of Columbia. GM is set to begin notifying owners of the affected vehicles, who will need to report to dealers to have both front brake hose assemblies replaced. Repairs are, naturally, free of charge. Scroll down for the official NHTSA bulletin. Report Receipt Date: APR 15, 2015 NHTSA Campaign Number: 15V225000 Component(s): SERVICE BRAKES, HYDRAULIC Potential Number of Units Affected: 4,907 Manufacturer: General Motors LLC SUMMARY: General Motors LLC (GM) is recalling certain model year 2004-2007 Cadillac CTS-V vehicles manufactured between September 6, 2003, and June 11, 2007, currently registered, or originally sold, in Connecticut, Delaware, Illinois, Indiana, Iowa, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, West Virginia, Wisconsin and the District of Columbia. In the affected vehicles, snow or water containing road salt or other contaminants may corrode the front brake hose fitting at the caliper. CONSEQUENCE: Corrosion may cause the brake system to leak which could lengthen the distance needed to stop the vehicle and increase the risk of a crash. REMEDY: GM will notify owners, and dealers will replace both front brake hose assemblies, free of charge. The manufacturer has not yet provided a notification schedule. Owners may contact Cadillac customer service at 1-800-458-8006. GM's number for this recall is 15149. Note: This recall is an expansion of recall 10V-105. NOTES: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

Cadillac CT6 uses aluminum to save 200 pounds

In Cadillac's recently launched ad campaign, the luxury brand's tagline is "Dare Greatly," and the two words suggest a brand willing to take big swings, even if they don't always connect. From what the company is promising, the forthcoming CT6 seems like an embodiment of that new motto. With an eventual range of turbocharged engines, reportedly including a turbo V8, a possible plug-in hybrid and streaming rearview mirror, the sedan is certainly pitched as tech showcase. Of course, extensive use of aluminum is practically mandatory to play in the luxury field these days, and Caddy is proving its latest creation can do that too. Despite the weighty appearance of the sedan's squared-off exterior, 64 percent of the CT6 is aluminum, including the entire exterior. Caddy claims that using so much of the lightweight metal sheds 198 pounds off the scales compared to using conventional steel. There still is some steel in the CT6; although it's predominately the high-strength variety. The engineers use the heavier metal for portions around the cabin and B-pillar for added safety. Cadillac also claims using steel "close-out panels" on lower portions of the sedan make the cabin quieter without needing as much sound deadening. The buildup to the CT6's public unveiling has been a long time coming after Cadillac pinned the flagship (for now) sedan's debut at the New York Auto Show nearly a year ago. When the sheet finally comes off on March 31, we get the first good idea about just how great Caddy's latest act of daring really is. Cadillac CT6 Elevates the Science of Mass Efficiency 2015-03-13 Technology DETROIT – Cadillac will use an advanced mixed-material approach for the lightweight body structure of the upcoming CT6 range-topping sedan. The structure is aluminum intensive, but the new Cadillac also includes 13 different materials customized for each area of the car to simultaneously advance driving dynamics, fuel economy and cabin quietness. The CT6 will debut March 31 at the New York International Auto Show and go into production late this year at General Motors' Detroit-Hamtramck assembly plant. "This is the rocket science of automobile construction and manufacturing today," said Cadillac President Johan de Nysschen.