One Owner, Extremely Clean, 3 Dvd Entertainment, Loaded on 2040-cars

Auto blog

Super Cruise’s failsafes

Even though Super Cruise is not a fully autonomous system, it incorporates redundancies like those used in aircraft to ensure failsafe operation. Before taking off on a 700-mile, 11-hour test drive of the system — and putting my life in its hands without my hands on the wheel — I sat down with Daryl Wilson, lead development engineer for Super Cruise, to get a deep dive into the system and its critical safety backups. Autoblog: First, what makes Super Cruise different from similar systems? Wilson: The key differentiator for Super Cruise is hand-free driving. It's an industry first in that respect. Our competitors require the driver at minimum to place their hands on the wheel with some frequency to ensure that the car knows that the driver is there. We don't. Two key technologies allow us to do this. One is our Driver Attention System, which is our methodology for making sure the driver is engaged with the vehicle and engaged with the road. This is a driver assist system, not a fully autonomous system. So it requires driver engagement. We use an infrared camera that constantly monitors the driver's face to determine the direction they're looking. We're looking for the driver to be what we call on-road — not on the center stack, not to left or right or down. That's all done by the tracking of the face. We also track that the eyes are open. It's infrared because at night you need to illuminate the face and you can't be shining a light into the driver's face. Then we have our lidar mapping that provides a foundation for control and redundancy to ensure safe performance. Autoblog: How does the mapping act as a redundant feature? Wilson: This system is only for use on divided, controlled access highways. What I mean by a divided highway is something more than a painted line between you and oncoming traffic. Whether that's a grassy area in between the lanes or a concrete barrier, anything that separates you from oncoming traffic. That's the divided highway part. The controlled access part is entrance ramps and exit ramps. Not with roads that cross at grade, with traffic crossing at the same level. To do that we geofenced these roads to ensure that operation is only allowed in these conditions. We don't just recommend you use it there; we ensure that you only use it there.

New V6 engines are only the start at Cadillac

Cadillac debuted its new family of V6 engines Friday, but that's not all General Motors' luxury brand has in store for the coming years. The six-cylinder powerplants will certainly help Cadillac in the near term, but they're just two of the many parts of the company's future strategy. GM has invested $12 billion in Cadillac to help the brand grow over the next five years, and the company will launch eight new products between now and 2020. That all starts with the launch of the CT6 flagship later this year – a fullsize luxury sedan we'll see for the first time in New York on March 31. The CT6 will introduce several new features and technologies to the Cadillac range, and with its launch also begins the slow restructuring of Cadillac's model-naming system. The new nomenclature means CT and XT badges for cars and utilities, respectively. Cadillac says that of the eight new vehicles it plans to launch by 2020, five of them will be first-time offerings in market segments where the brand currently does not play. But it's not just about new products – new powertrains are an important part of the Cadillac story, too. After the new V6 engines – a naturally aspirated 3.6-liter and a twin-turbocharged 3.0-liter engine – launch later this year in the 2016 ATS, CTS and CT6, the company says it has a strategy for V8 power – possibly a twin-turbo application – as well as future electrification. Cadillac also says it's working on adding four- and six-cylinder diesel powertrains, though it's unclear which vehicles will make use of those engines. This new six-cylinder engine family is indeed important, with Cadillac's chief engineer, David Leone, calling it the "most advanced V6 in the industry." With 335 horsepower, the 3.6-liter engine is the highest output, naturally aspirated V6 powerplant Cadillac has done – and that's SAE-certified, and on regular fuel. Beyond that, the 3.0-liter mill (pictured at right) marks the first application of GM's active fuel management system on a twin-turbocharged engine. This means that when full power isn't necessary, the TTV6 can run as a 2.0-liter V4 in order to save fuel. New transmissions are also part of the V6 engine story. GM's all-new eight-speed Hydra-Matic 8L45 gearbox will be paired to the 3.6-liter V6, and the 3.0-liter TTV6 will use the company's existing 8L90 transmission that is already found in the Chevrolet Silverado and GMC Sierra pickups (with the 6.2-liter engine).

Cadillac president de Nysschen says electrification coming 'across the spectrum'

We like to pick on new Cadillac president Johan de Nysschen for his insistence, many years ago, when he was president of Audi of America, that plug-in vehicles are for idiots. Listening to him give the keynote address at the Washington Auto Show today, you wouldn't know he ever said anything negative about an electric vehicle. Instead, he sounds something like a EV-angelist. De Nysschen said that Cadillac will be able to benefit from GM's considerable expertise in plug-in technology, which he said would be "applied across the spectrum of our portfolio." GM's electric committment will help in "making electrification commonplace." With the plug-in ELR already on the road, de Nysschen said that the company's next step in advancing powertrains will be the introduction of stop/start technology – which de Nysschen called an "important system to reduce fuel consumption and CO2 emissions" – into a Cadillac for the first time later this year. Without giving any specific details, de Nysschen said that Cadillac will introduce eight new models (not necessarily plug-ins) by the end of this decade, including five that "will take Cadillac into market segments where the brand is not even present today." These new vehicles will likely be much lighter than today's vehicles, de Nysschen said, because "weight reduction today is critical to automotive design, it helps to improve fuel efficiency and contributes to desireable vehicle dynamics." The key is to reduce weight without compromising safety or comfort and to use the right material – steel, aluminum, carbon fiber – in the right place at the right time. It was a not-so-subtle jab at Ford and its new aluminum F-150. "In the pursuit of weight reduction, some manufacturers have also opted for abandoning steel and have gone for an all-aluminum approach," he said. "At Cadillac, we believe that different materials each present particular advantages in specific applications. There is no single material that represents the optimum balance of the conflicting objectives of every single application." Related video: