2011 Cadillac Escalade Premium Dvd Gps 22" Wheels on 2040-cars

Auto blog

2016 Cadillac CT6 has arrived

We have known for a while that the 2015 New York Auto Show would mark the debut of Cadillac's latest flagship model. But after months of waiting as Caddy slowly revealed details, the 2016 Cadillac CT6 has finally arrived. The sedan is a technological tour de force for the brand and inaugurates a long list of new technologies. The CT6 will begin production at the Detroit-Hamtramck Assembly plant in late 2015 and will go on sale with three engine options. Caddy won't release final figures yet, but based on preliminary numbers, we know the base 2.0-liter turbocharged four-cylinder will make 265 horsepower. Stepping up to the newly revised 3.6-liter V6 will net buyers an estimated 335 hp, and finally there will be the 3.0-liter twin-turbo V6 with an output of around 400 hp. All of these engines will be mated to eight-speed automatic transmissions, and six-cylinder models will get standard all-wheel drive that will be able to constantly vary the power sent to the front wheels. Carrying those powertrains is the new, aluminum-intensive Omega architecture. In addition to the lightweight metal making up the platform, the entire exterior also uses it to provide an estimated curb weight of less than 3,700 pounds. The decision to shed mass makes the CT6 a featherweight in its class – for comparison, the lightest, six-cylinder Audi A8 weighs 4,365 pounds. The sedan rides on a 122.4-inch wheelbase and is 204 inches long. That makes the Cadillac about 1.3 inches shorter than the smallest BMW 7 Series, but the Caddy is projected to tip the scales at less than both the big Bimmer and even the 5 Series, too. Cadillac wants the CT6 to be a luxury sedan that drivers can enjoy. In addition to the low weight, there's an available Active Chassis System throughout the range with rear-wheel steering and Magnetic Ride Control. When combined with the all-wheel-drive system, it means every corner of the car is both driving and steering the vehicle. Inside, the CT6 offers a ton of tech and luxury. Drivers are held in massaging, leather seats, and rear passengers also get adjustable chairs that are heated and cooled. Quad-zone climate controls keep everyone comfortable. Plus, in addition to the 34-speaker Bose audio system and streaming rearview mirror, there are features like a 10.2-inch CUE infotainment system with a capacitive touchscreen and console-mounted touchpad. The display also shows a 360-degree view outside and can even record video when the security system is activated.

Buy a Mosler Twinstar, the V16 Cadillac you almost wanted [w/video]

Cadillac was once famous for opulent, V16 luxury vehicles, but this bizarre 16-cylinder 1999 Eldorado that's for auction on eBay Motors isn't much like its ancestors. Dubbed the TwinStar, this beast features a Northstar V8 with 275 horsepower to drive the front wheels and a second Northstar with 300 hp is in the trunk to spin the rear axle. Each mill has its own four-speed automatic gearbox, and the result is a total of 575 hp of all-wheel drive fury in an incredibly weird package. The TwinStar's interior and exterior certainly don't hide the odd powertrain setup. To fit the engine in the trunk, the builders pushed the rear wheels further back and lengthened the wheelbase. There are also scoops low on each side to funnel air to the V8. Inside, there's a second ignition on the side of the center stack, and a digital instrument cluster replaces the glove box. It's sure to confuse any passenger you can convince to take a ride in this thing. Mosler, the supercar company known for models like the MT900, built five TwinStars, according to the auction. The seller links to the original review by Car and Driver, and the magazine noted that the sensation of the two engines working in tandem was rather odd. However, the TwinStar was a capable performer and ran to 60 in 5 seconds in its test. If you want to start your new year with the oddest vehicle possible, the TwinStar's auction sits at $5,600 with the reserve not met as of this writing, and it ends January 2, 2016, at 8:00 PM ET. If you can't wait that long, the dealer lists the car online for $39,900. There's also a spirited conversation on Bring a Trailer about this automotive oddity.

2016 Cadillac CT6 to get an aluminum body?

Well this is interesting: A hot-off-the-press report in Automobile claims the coming Cadillac CT6 will have an aluminum body. Most write-ups on the CT6 claim it will have a body that's a combination of aluminum and high-strength steel - Automobile itself wrote of "high-strength steel, aluminum, and steel stampings" in October. An all-aluminum body would be quite the reversal, contradicting the last four months of reportage and company statements on the matter. Mark Reuss, EVP of global development at General Motors, told The Detroit News in October, "We will create with the CT6, the world's most advanced body structure... [and] it's not aluminum. It's a stronger, smarter, safer premium luxury vehicle." It echoed the earlier Automobile story in saying the CT6 would use GM's "patented welding technology with high-strength steel, aluminum and steel stampings and castings." That same month, the Wall Street Journal ran a piece titled, "GM Won't Follow Aluminum Strategy in Future Cars," in which Reuss said, "making big statements around all carbon fiber, all aluminum, all magnesium, they're very interesting," and that GM wouldn't be doing it. That piece also circled back to a material mix and GM's special welding process, saying the CT6 "will have a body made of aluminum, high-strength steel and other materials, and will be 100 kilograms (220 pounds) lighter than a similar-sized car made of high-strength steel." We don't know what kind of body Cadillac's new assault on luxury is going to wear, but now we can't wait to find out. Featured Gallery Cadillac Elmiraj Sedan: Spy Shots View 22 Photos News Source: AutomobileImage Credit: Chris Doane Automotive Cadillac GM Luxury Sedan aluminum cadillac ct6