2009 Cadillac Escalade Ultra Sunroof Nav Dvd 22's 67k Texas Direct Auto on 2040-cars

Auto blog

Hennessy wastes no time in supercharging the 2015 Cadillac Escalade

The ink is still drying on the all-new 2015 Cadillac Escalade sales brochures, but that hasn't stopped Texas-based Hennessey Performance (HPE) from leaping out of the gate with its own high-performance variant. In stock form, the big fourth-generation Cadillac flagship arrives with a new small block naturally aspirated 6.2-liter Ecotec3 V8 delivering 420 horsepower and 460 pound-feet of torque. Fresh out of the showroom, the 5,900-pound SUV will sprint to 60 mph in 5.9 seconds.
While that is plenty fast for some owners, others don't want to be shamed by a 550 horsepower Mercedes-Benz GL63 AMG or a 510 horsepower Land Rover Range Rover Sport - both will leave the stock Escalade at a stoplight.
The team at HPE has come to the rescue with its HPE550 supercharger upgrade, which includes a belt-driven supercharger, air-to-water intercooler, recalibrated engine management software and a three-year/36,000 mile powertrain warranty. With 6 psi of boost, the direct-injected 6.2-liter is tuned to deliver an impressive 557 horsepower and 542 pound-feet of torque - gains of 32 percent and 18 percent, respectively, over stock. Although HPE isn't releasing performance figures as of yet, our math says that should be enough power to put the two Europeans in the Cadillac's rearview mirror. The company also offers a set of 20-inch lightweight H10 forged monoblock wheels, to further improve performance.

Cadillac XT5 caught uncovered during photo shoot

It's only been a few weeks since Cadillac announced that its replacement for the SRX, the new XT5, is on its way. Now, we have images of it out in the open and completely free of camouflage. Obtained by a reader at Jalopnik's Opposite Lock forum, the Caddy was spotted during what user Saw930 believes was a photo shoot in New York's trendy SoHo neighborhood. There's only a pair of images, from the front and rear three-quarters, but it's enough to give us a very thorough overview of the exterior styling on the new CUV. In short, the design language that has been seen on Escalade, CTS, and upcoming CT6 has indeed made its way to the SRX replacement. The broad, egg-crate grille is perhaps the cleanest iteration of Caddy's latest styling, while the CT6-inspired headlights look sharp, as well. Expect a similar headlight pattern to the CTS, with strong LED character accents on the outside of the headlights that integrate seamlessly with the lower DRLs. In back, the taillights curve over the rear haunches and blend into an extremely strong shoulder line. It's a dynamic and aggressive piece of design that we'll need to see in person before signing off on. The rear bumper, meanwhile, is a nicely styled piece, complete with twin, integrated, rectangular tailpipes that flank a piece of (probably faux) skid plating. There's a similar off-road treatment in the front bumper, as well. While we wait for scour for more news on the XT5, have a look at the two images Saw930 captured and posted at Oppo and let us know what you think in Comments.

Cadillac XT3 caught covered in copious camouflage

While a bit difficult to tell thanks to the impressive camouflage used, what we're looking at here is likely the upcoming Cadillac XT3. There are a few details that stand out to lend credence to this prediction. There are a handful of sharp angles scattered throughout that are in line with Cadillac's modern design language. Specifically in the LED running lights and on the side mirrors. The rear profile also is reminiscent of the current, and slightly larger XT5. The rear lights extend into the D-pillars, which would match the current Escalade. We get a pretty clear picture of the rear suspension on this XT3. It's clearly an independent rear suspension using coil springs. While General Motors uses independent suspension on some of its crossovers, we can't quite match it to a particular model. We believe that if the XT3 is based on an existing model (which it almost certainly is), the platform and suspension have been substantially modified. The XT3 could use a version of the D2XX platform that underpins the Buick Envision. However, we know from a previous report that the XT3 will likely be built at the factory that produces the Buick LaCrosse and Chevy Malibu. The XT5 uses a modified version of the LaCrosse/Malibu platform, so it's possible the XT3 could use a shorter version of the XT5 chassis. Depending on how small the XT3 ends up being, it might even share a platform with the Chevy Trax and Buick Encore. However, considering their economy car roots and torsion-bar rear suspension, we think that's the least likely. Regardless of what chassis is underneath its crisp bodywork, we expect the XT3 to be released sometime next year. Related Video: