1980 Cadillac Eldorado Biarritz Great Condition Drives Great 5.7 Diesel Rare Car on 2040-cars

Auto blog

2015 Cadillac ATS, CTS recalled over brake issue

A problem with the brakes on the 2015 ATS and CTS has prompted Cadillac to issue a recall. According to the notice below from the National Highway Traffic Safety Administration, the issue revolves around the bracket that connects the brake pedal assembly and the rod that actuates the brakes. Even under normal operation, that bracket could fracture, impeding the ability to slow or stop the vehicle. That, as you're surely aware, could increase the risk of a crash. The issue affects a reported 2,163 vehicles in the United States. Owners will need to be bring their vehicles in to their local dealership to have those brackets replaced starting on August 1. See the complete recall notice below. RECALL Subject : Brake Pedal Bracket may Fracture Report Receipt Date: JUN 09, 2015 NHTSA Campaign Number: 15V358000 Component(s): SERVICE BRAKES, HYDRAULIC Potential Number of Units Affected: 2,163 Manufacturer: General Motors LLC SUMMARY: General Motors LLC (GM) is recalling certain model year 2015 Cadillac ATS and CTS vehicles. The affected vehicles have a bracket between the brake pedal assembly and the rod that actuates the brakes that may fracture during normal brake pedal operation. CONSEQUENCE: If the bracket fractures, the driver would not be able to apply the brakes, increasing the risk of a crash. REMEDY: GM will notify owners, and dealers will inspect the vehicle and replace any affected bracket, free of charge. The recall is expected to begin August 1, 2015. Owners may contact Cadillac customer service at 1-800-458-8006. GM's number for this recall is 15352. NOTES: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

Cadillac planning more Vsport models

There's a new intermediate class of luxury performance cars emerging. Audi has been doing it for years with its S-line bridging the gap, in many cases, between the standard fare and the full-on RS performance range. BMW's getting in on it with the M Sport line slotting in below the full M models. And now Cadillac is joining the fun with its Vsport offerings.
Models like the CTS Vsport and XTS Vsport are packing a new 3.6-liter twin-turbo V6 with 410 or more horsepower (along with bigger wheels and brakes) to slot in between the standard model and any impending V variant. Well, it appears Cadillac isn't about to stop there.
Speaking with The Detroit News, Cadillac product chief Hampden Tener revealed that, based on the response to the XTS Vsport, the brand is planning more Vsport models. He did not, however, indicate which would be the next to get the slightly sportier treatment. With the full ATS-V expected to pack a version of the same engine powering the aforementioned XTS and CTS Vsport models, an ATS Vsport would have to pack a smaller engine to fit in below. That only leaves the SRX crossover, Escalade SUV and the upcoming ELR hybrid. Food for thought.

Cadillac scraps three-row CUV plans

Crossovers are one of the hottest automotive segments on the planet. Apparently, the idea of mixing the practicality of a station wagon with the looks of an SUV appeals to people whether they are in Cleveland or Shanghai because nearly every automaker is jumping into the market. So it was no surprise when early rumors suggested Cadillac was planning two, new CUVs to fit above and below the SRX. But things might have changed since then.
New rumblings indicate Caddy is taking a different route. Instead of two crossovers, only the compact is on the way, and the larger, three-row CUV on the Lambda platform to sit between the SRX and Escalade may be a goner. According to Ward's Auto, General Motors thinks that the other three-row, Lambda vehicles like the Buick Enclave and GMC Acadia compete too closely with the proposed Cadillac. The decision comes fairly close to the 2017 intended production date.
As far back as 2010, this Lambda-platform based CUV was considered highly likely for production. However, Cadillac Senior Vice President Bob Ferguson was somewhat cooler about it when he discussed the new crossover briefly last year. He said the model could use the Escalade name, despite its unibody chassis, but no decision had been made yet to actually produce it.