1977 Cadillac Eldorado Base Coupe 2-door 7.0l on 2040-cars

Auto blog

Cadillac CT6 will get high-res streaming video rearview mirror

Cadillac is preparing a big upgrade to the humble rearview mirror, adding a streaming video function that it claims will improve a driver's field of vision by 300 percent. The new system will debut on the 2016 CT6 flagship. The streaming system, which eliminates the visual obstructions caused by passengers, headrests and the rear pillars, relies on a 1280-by-240-pixel TFT display and a high-definition camera to reduce glare and improve visibility in low-light conditions. That camera even addresses one of the big annoyances of today's camera systems, by adding a hydrophobic coating to keep the camera lens clear. The system can easily be switched off at the press of a button, at which point the driver has a simple electrochromatic mirror at his disposal. "The closest comparison to this kind of rear vision would be driving a convertible with the top down," Travis Hester, the CT6's executive chief engineer said in a statement. "The streaming video is a significant enhancement for the luxury customer interested in purposeful technology." Scroll down for the press release from Cadillac. Cadillac Adds Streaming Video to Enhance Driver Vision and Safety Display eliminates visual obstructions, increases rearward vision by 300 percent 2014-12-18 DETROIT – Cadillac late next year will add high-resolution streaming video to the function of a traditional rearview mirror, removing obstructions of passengers, headrests and the vehicle's roof and rear pillars. The streaming video mirror improves field of vision by an estimated 300 percent, or roughly four times greater than a standard rearview mirror. "The closest comparison to this kind of rear vision would be driving a convertible with the top down," said Travis Hester, Cadillac CT6 executive chief engineer. "In addition to the increased field of view, the technology eliminates any rear seat, rear pillar or passenger obstructions, allowing the driver an unimpeded view of the lanes behind and traditional blind-spots," Hester said. Thanks to a high dynamic range, the camera's video feed reduces glare and allows a crisper image in low-light situations, versus a traditional glass electrochromatic, or auto-dimming, rearview mirror. The in-mirror display is an industry-leading 1280 by 240-pixel TFT-LCD display with 171 pixels per inch, combined with a HD camera designed specifically to enhance rear view lane width and maximize low-light situations.

Cadillac is returning to endurance racing with a new prototype in 2017

In two months, Cadillac will return to top-tier endurance racing with its all-new Daytona Prototype International racecar after 14 years away. The car, which adheres to IMSA's new DPi regulations, looks as long, low, and Cadillac-like as anyone could have hoped. It's set to debut at the Rolex 24 at Daytona and will compete head to head with the likes of Mazda and Nissan in what is shaping up to be one of the most diverse and exciting forms of American motor racing in years. The new car will be run by Wayne Taylor Racing, the team that previously fielded the Corvette Daytona Prototype. Wayne Taylor himself has won the 24 Hours of Daytona twice, in 1996 and 2005. He now manages the team and leaves the driving duties to his two sons, Ricky and Jordan. They'll be joined in the cockpit by Max Angelelli, Wayne Taylor's teammate in 2002 at Cadillac's last unsuccessful attempt at endurance racing. To understand Cadillac's new car, officially called the DPi-V.R., you need to understand IMSA's DPi category. Basically, manufacturers are allowed to base their car on one of four chassis that follow the FIA LMP2 regulations. The chassis come from either Dallara, Onroak Automotive, ORECA or Riley/Multimatic. Cadillac will base their car on the Dallara platform. The DPi regulation differ from the LMP2 in two major ways: non-standardized engines and the ability to change certain parts of the bodywork. The DPi regulations are intended to give the variety of the top-tier LMP1 cars at a fraction of the cost. When it came to choosing an engine, Cadillac wanted to power the new car with something kinda sorta production based. The new car will use a naturally aspirated 6.2-liter pushrod V8 that shares some base architecture with the engine in the current CTS-V. While the power output hasn't been announced, expect about 600 horsepower. While that's down compared to the CTS-V, there is far less mass to move around as the Dallara chassis is a svelte 2,050 lbs. Since all the teams will be running different engine configurations, expect restrictors of some sort to help balance the power disparity. The parts of the body work that can be modified - The nose, sidepods, rear wheel arches and rear valance - have all been designed to mimic Cadillac roadcar design elements. Even the wheels look like they were pulled straight from the CTS-V. The front splitter, the floor, and the diffuser are common elements shared with other DPi cars.

Cadillac finds a few more horsepower for ATS-V

We've rarely found cause to complain about a car getting more power, and guess what? That's not going to change here. After initially announcing that the new ATS-V would come to market with a Corvette-matching 455 horsepower, Cadillac has come back with an SAE-certified 464 horsepower. That, as Automobile points out, puts the high-performance ATS in spitting distance of the base Mercedes-Benz C63 AMG and its 469 hp. Anyone else feeling bad for owners of the 425-hp BMW M3? While the ATS-V is getting a bit more grunt, somehow, we doubt Cadillac will adjust its previously published performance figures. Expect 60 miles per hour to arrive in 3.9 seconds, with a top speed of 185 mph. As of this writing, a lucky Autoblog staffer is lapping the ATS-V around Circuit of the Americas in Austin as part of the sedan's big launch. So while we can't fill you in on its real-world performance just yet, expect a big update soon. Related Video: