1970 Cadillac Eldorado Coupe 2-door 8.2l (500cu. In.) V8 on 2040-cars

Auto blog

Chinese-made Cadillac CT6 Plug-In starts US sales

General Motors has started US sales of the Cadillac CT6 Plug-In after taking its first domestic deliveries of the China-produced sedan last month. The model is GM's first new plug-in hybrid in the US since the automaker discontinued sales of the ELR extended-range plug-in last year. The arrival and sales, first reported by InsideEVs, were confirmed by Cadillac spokesman Andrew Lipman. Not surprisingly, the sedan isn't cheap, as the CT6 Plug-In is priced at $75,095, or almost $12,000 more than the gas-powered variant, though that figure doesn't include federal and state tax credits for electric vehicles. For that tab, buyers get a 335-horsepower luxury car that can go 31 miles on electricity alone, and 0-60 miles per hour in a little over 5 seconds. The model gives GM three plug-in vehicles to sell to the American public, or the same number US competitor Ford offers. InsideEVs estimates that about 100 of the sedans have been delivered to US dealers, so the car remains a relatively low-volume affair. By comparison, GM's Chevrolet division has sold 5,563 Volt extended-range plug-ins and 3,092 Bolt electric vehicles through March. Cadillac sold 534 units of the ELR in 2016 after moving 1,024 the previous year. GM opted to produce the plug-in hybrid in China because of that country's receptiveness to new models that feature alternative and environmentally friendlier powertrains. Additionally, such production shortens the distance to the CT6's battery maker LG Chem, which is producing the car's battery packs in South Korea. On that note, GM has previously estimated that the Cadillac CT6 Plug-In will move more units in China than in the US. Related Video:

GM patent reveals new two-stage turbocharger

Modern turbochargers may be some of the best ever made, but performance is something that engineers are always trying to improve. According to GM Inside News, General Motors (GM) is hoping to alleviate some of the negative aspects of a two-stage turbocharger setup with a newly-patented design. The patent, that was filed on May 19, 2016, reveals a clever bypass system that allows the engine, a four-cylinder unit, to optimize both the low-pressure and high-pressure inlets for its respective functions. According to the filing, a conventional two-stage turbocharger setup is engineered to allow both turbines to operate simultaneously at low and mid engine speeds. At high engine speeds, only the low-pressure turbine works. The setup can't isolate either the low or high pressure side, which can impair low-end performance. GM's new two-stage turbocharger setup looks to eliminate this by linking the high-pressure turbo to the exhaust manifold through the high-pressure inlet duct. The low-pressure turbo is attached to the high-pressure turbo by a low-pressure inlet duct, which is linked to a connecting channel. A single actuator that is housed in the exhaust manifold creates a bypass that can opens the high-pressure inlet or close the connecting channel. Depending on what the engine load and speed is, the ECU guides the actuator—a single rotating spindle with discs corresponding to flanges on the high and low pressure sides—to isolate one of the two turbos. Isolating the turbos allow the respective inlets to be engineered for the best possible fluid dynamic performance. The setup should increase performance and decrease lag. There's no word on what car this setup will make an appearance on, but it will most likely be used in premium vehicles before trickling down to the rest of GM's vehicles. Related Video: News Source: GM Inside News, AutoGuide via GM Authority Cadillac Chevrolet GM Technology Sedan turbo patent engine turbocharging

Sunday Drive: An automotive flavor for every taste

Last week was flush with interesting new vehicle debuts, led by the new 2019 Hyundai Santa Fe. This crossover is entering straight into the heart of one of the world's most competitive automotive segments, and it's doing so with a fresh sense of style and a brace of new technologies. Our readers are clearly intrigued – the Santa Fe was the biggest news story of the last week on these online pages. It's fitting that a crossover generated a lot more interest than a traditional wagon, though we don't really have to be happy about it. Still, the completely new, fully redesigned Volvo V60 is worth taking another look at. First of all, it's pretty, in a traditionally Scandinavian way. Second, it's quick, with a 0-60 time of as little as 4.8 seconds. And finally, it's practical, with all kinds of room for cargo without the dynamic penalties of an unnecessary lift kit. Moving on from new vehicle debuts, we took another long look at the Honda Ridgeline. It's definitely a non-conformist pickup truck, based not on a body-on-frame platform but on a more carlike unibody design. That means it can't tow as much as some other trucks, but it also means the Ridgeline drives better than any of its more truckish competitors. It's the Swiss army knife of pickup trucks. Rounding out our coverage from last week are three sets of spy photos, each showing the interior of a hotly anticipated new model. One is a truck, one is a crossover, and the last is a sportscar. All of them are worth another look. As always, stay tuned to Autoblog this week for all the most important news in the automotive world. 2019 Hyundai Santa Fe unveiled 2019 Volvo V60 | Sleek, swift new twist on the Swedish wagon 2018 Honda Ridgeline | Pocketknife pickup is up for anything 2019 GMC Sierra interior looks just like the Silverado's 2019 Cadillac XT4 interior has actual buttons, no more touch-sensitive panel 2020 Porsche 911 992 spy shots show interior and manual transmission Cadillac GMC Honda Hyundai Porsche Volvo Truck Crossover Wagon Luxury Performance Sedan hyundai santa fe