1960 Cadillac Eldorado, Stored Over 40 Years, Totally Rust Free, Runs & Drives on 2040-cars

Auto blog

Cadillac ATS and CTS get blacked-out treatments

Some still think of gallons of chrome when Cadillac comes to mind, and some of the automaker's models still take the blinged-out approach (we're looking at you, Escalade). But for those whose impression of the America luxury marque's is about more than brightwork, Caddy has announced a new Black Chrome package. Available for the ATS coupe, ATS sedan, and CTS sedan, the optional package, as you might have guessed, applies dark chrome to the outside of the vehicle. On the ATS, that includes the front grilles (upper and lower) and rear trim, as well as body-colored door handles, gloss black window moldings, and dark-finish 18-inch alloys. Buyers can choose to apply the package to the Luxury or Premium trim, with the 2.0-liter turbo or 3.6-liter V6, in rear- or all-wheel drive, with four exterior paint choices, any interior available, and in two- or four-door bodystyles. The package goes for $795 on the sedan and $595 for the coupe. The package costs a little more for the CTS but includes a bit less trim, limited to the grille and those same 18-inch alloys. It can still be paired to the 2.0 turbo or 3.6-liter V6 in rear- or all-wheel drive, with three exterior tints and a limited selection of interior treatments. Pricing here starts at $1,295 with the Luxury trim, or $1,095 in either Performance or Premium spec. Those looking for a shinier treatment, however, need not apply. Related Video: Cadillac Introduces Black Chrome Package for ATS and CTS ENHANCES ENGAGING PERFORMANCE, STRIKING DESIGN 2016-03-14 Cadillac today introduced the Black Chrome Package for Cadillac ATS Sedan and Coupe and Cadillac CTS Sedan. The package further enhances the engaging performance and the striking design of the ATS, a Consumer Guide Best Buy for three years in a row, and the CTS, named one of Car and Driver's 10Best for three years in a row. The Black Chrome Package is available now to order at local Cadillac dealerships or through the Build Your Own tool on the Cadillac.com website. For additional information, customers can call Cadillac Customer Experience at 1-800-458-8006.

Cadillac finds a few more horsepower for ATS-V

We've rarely found cause to complain about a car getting more power, and guess what? That's not going to change here. After initially announcing that the new ATS-V would come to market with a Corvette-matching 455 horsepower, Cadillac has come back with an SAE-certified 464 horsepower. That, as Automobile points out, puts the high-performance ATS in spitting distance of the base Mercedes-Benz C63 AMG and its 469 hp. Anyone else feeling bad for owners of the 425-hp BMW M3? While the ATS-V is getting a bit more grunt, somehow, we doubt Cadillac will adjust its previously published performance figures. Expect 60 miles per hour to arrive in 3.9 seconds, with a top speed of 185 mph. As of this writing, a lucky Autoblog staffer is lapping the ATS-V around Circuit of the Americas in Austin as part of the sedan's big launch. So while we can't fill you in on its real-world performance just yet, expect a big update soon. Related Video:

Super Cruise’s failsafes

Even though Super Cruise is not a fully autonomous system, it incorporates redundancies like those used in aircraft to ensure failsafe operation. Before taking off on a 700-mile, 11-hour test drive of the system — and putting my life in its hands without my hands on the wheel — I sat down with Daryl Wilson, lead development engineer for Super Cruise, to get a deep dive into the system and its critical safety backups. Autoblog: First, what makes Super Cruise different from similar systems? Wilson: The key differentiator for Super Cruise is hand-free driving. It's an industry first in that respect. Our competitors require the driver at minimum to place their hands on the wheel with some frequency to ensure that the car knows that the driver is there. We don't. Two key technologies allow us to do this. One is our Driver Attention System, which is our methodology for making sure the driver is engaged with the vehicle and engaged with the road. This is a driver assist system, not a fully autonomous system. So it requires driver engagement. We use an infrared camera that constantly monitors the driver's face to determine the direction they're looking. We're looking for the driver to be what we call on-road — not on the center stack, not to left or right or down. That's all done by the tracking of the face. We also track that the eyes are open. It's infrared because at night you need to illuminate the face and you can't be shining a light into the driver's face. Then we have our lidar mapping that provides a foundation for control and redundancy to ensure safe performance. Autoblog: How does the mapping act as a redundant feature? Wilson: This system is only for use on divided, controlled access highways. What I mean by a divided highway is something more than a painted line between you and oncoming traffic. Whether that's a grassy area in between the lanes or a concrete barrier, anything that separates you from oncoming traffic. That's the divided highway part. The controlled access part is entrance ramps and exit ramps. Not with roads that cross at grade, with traffic crossing at the same level. To do that we geofenced these roads to ensure that operation is only allowed in these conditions. We don't just recommend you use it there; we ensure that you only use it there.