1959 Cadillac Eldorado Seville...dry Western Car With Tri Power, Newer Paint.... on 2040-cars

Auto blog

Cadillac confirms 420-hp twin-turbo V6 for 2014 CTS [w/videos]

The 2014 CTS will break cover next week at the New York Auto Show, but Cadillac has released a few details of what we can expect to find under the car's hood. As we saw in some spy shots back in January, the biggest news for the midsize Caddy will be a twin-turbocharged V6 producing a whopping 420 horsepower and 430 pound-feet of torque.
This LF3 engine will be paired to a new eight-speed automatic transmission, which will help balance performance and fuel economy. We still don't know how much the 2014 CTS has grown in terms of size and weight, but General Motors says that new sedan will return 17 miles per gallon in the city and 25 mpg highway with the new engine to go with a 0-60 mile per hour time of 4.6 seconds - that means the new CTS will have the fuel economy close to the current base model sedan and acceleration not too far from the current CTS-V. General Motors also confirmed that this twin-turbo V6 will be available in the 2014 XTS this fall.
The next-generation CTS will carry over the 3.6-liter V6 from the current car (likely as a base engine) and also add the 2.0-liter turbo four-cylinder from the ATS. Check out all the details on this new engine and watch a few videos (including GM's nifty tilt rig) by scrolling below.

We really want to use an eCrate to restomod an old GM car. Here's what we'd build

You hopefully saw the news today of GM's introduction of its Connect and Cruise eCrate motor and battery package, which effectively makes the Bolt's electric motor, battery pack and myriad other elements available to, ah, bolt into a different vehicle. It's the same concept as installing a gasoline-powered crate motor into a classic car, but with electricity and stuff.  This, of course, got us thinking about what we'd stuff the eCrate into. Before we got too ahead of ourselves, however, we discovered that the eCrate battery pack is literally the Bolt EV pack in not only capacity but size and shape. In other words, you need to have enough space in the vehicle to place and/or stuff roughly 60% of a Chevy Bolt's length. It's not a big car, but that's still an awful lot of real estate. There's a reason GM chose to simply plop the pack into the bed and cargo area of old full-size SUVs. Well that, and having a rear suspension beefy enough to handle about 1,000 pounds of batteries.  So after that buzz kill, we still wanted to peruse the GM back catalog for classics we'd love to see transformed into an electric restomod that might be able to swallow all that battery ... maybe ... possibly ... whatever, saws and blow torches exist for a reason.  1971 Buick Riviera Consumer Editor Jeremy Korzeniewski: If you’re going to build an electric conversion, why not do it with style? ThatÂ’s why IÂ’m choosing a 1971-1973 Buick Riviera. You know, the one with the big glass boat-tail rear end that ends in a pointy V. Being a rather large vehicle with a big sloping fastback shape, IÂ’m hoping thereÂ’s enough room in the trunk and back seat to pack in the requisite battery pack. That would likely require cutting away some of the metal bulkhead that supports the rear seatback, but not so much that a wee bit of structural bracing couldnÂ’t shore things up. The big 455-cubic-inch Buick V8 up front will obviously have to go. Remember, this was the 1970s, so despite all that displacement, the Riviera only had around 250 horsepower (depending on the year and the trim level). So the electric motorÂ’s 200 horsepower and 266 pound-feet of torque ought to work as an acceptable replacement.   1982 Chevrolet S10 Associate Editor Byron Hurd: OK, so the name "E-10" is already taken by a completely different truck, but let's not let labels get in the way of a fun idea.

Cadillac CTS-V spotted with big exhaust, new grille?

If you thought Cadillac was content to leave its twin-turbocharged Vsport as the range-topping CTS, think again. Behold, our first good glimpse at the next-generation Cadillac CTS-V sedan, sporting more aggressive styling (somewhere under there), meaty quad-exhaust pipes, and what very well could be a new face for the V-badged Caddies.
Creating an all-new grille design seems like an awful lot of work just for a prototype, so it's very possible that the vertical-bar treatment you see here could make its way into production. Our spy photographers have pointed out that they've seen this same sort of grille treatment on prototypes for the smaller ATS-V sedan, and we've heard V-series models may soon have greater differentiation from the standard vehicles that sired them - that seems especially necessary if Cadillac insists on expanding this whole Vsport range.
Regardless of how its front end looks, the CTS-V ought to be a real monster. Industry sources say we can expect to see a supercharged version of General Motors' 6.2-liter V8 under the Caddy's hood, and considering the current car already makes 556 horsepower and 551 pound-feet of torque, we wouldn't be surprised to see a decent increase in both of those numbers. After all, one of the CTS-V's main competitors, the Mercedes-Benz E63 AMG, is currently putting out 550 hp and 590 lb-ft of torque. Could this mean a 600-hp Cadillac is on the horizon?