1983 Cadillac Deville Coupe 2-door 4.1l Rust Free Winter Stored 2 Owner 68k Mi on 2040-cars

Auto blog

2015 Cadillac ATS, CTS recalled over brake issue

A problem with the brakes on the 2015 ATS and CTS has prompted Cadillac to issue a recall. According to the notice below from the National Highway Traffic Safety Administration, the issue revolves around the bracket that connects the brake pedal assembly and the rod that actuates the brakes. Even under normal operation, that bracket could fracture, impeding the ability to slow or stop the vehicle. That, as you're surely aware, could increase the risk of a crash. The issue affects a reported 2,163 vehicles in the United States. Owners will need to be bring their vehicles in to their local dealership to have those brackets replaced starting on August 1. See the complete recall notice below. RECALL Subject : Brake Pedal Bracket may Fracture Report Receipt Date: JUN 09, 2015 NHTSA Campaign Number: 15V358000 Component(s): SERVICE BRAKES, HYDRAULIC Potential Number of Units Affected: 2,163 Manufacturer: General Motors LLC SUMMARY: General Motors LLC (GM) is recalling certain model year 2015 Cadillac ATS and CTS vehicles. The affected vehicles have a bracket between the brake pedal assembly and the rod that actuates the brakes that may fracture during normal brake pedal operation. CONSEQUENCE: If the bracket fractures, the driver would not be able to apply the brakes, increasing the risk of a crash. REMEDY: GM will notify owners, and dealers will inspect the vehicle and replace any affected bracket, free of charge. The recall is expected to begin August 1, 2015. Owners may contact Cadillac customer service at 1-800-458-8006. GM's number for this recall is 15352. NOTES: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

2016 Cadillac CT6 has arrived

We have known for a while that the 2015 New York Auto Show would mark the debut of Cadillac's latest flagship model. But after months of waiting as Caddy slowly revealed details, the 2016 Cadillac CT6 has finally arrived. The sedan is a technological tour de force for the brand and inaugurates a long list of new technologies. The CT6 will begin production at the Detroit-Hamtramck Assembly plant in late 2015 and will go on sale with three engine options. Caddy won't release final figures yet, but based on preliminary numbers, we know the base 2.0-liter turbocharged four-cylinder will make 265 horsepower. Stepping up to the newly revised 3.6-liter V6 will net buyers an estimated 335 hp, and finally there will be the 3.0-liter twin-turbo V6 with an output of around 400 hp. All of these engines will be mated to eight-speed automatic transmissions, and six-cylinder models will get standard all-wheel drive that will be able to constantly vary the power sent to the front wheels. Carrying those powertrains is the new, aluminum-intensive Omega architecture. In addition to the lightweight metal making up the platform, the entire exterior also uses it to provide an estimated curb weight of less than 3,700 pounds. The decision to shed mass makes the CT6 a featherweight in its class – for comparison, the lightest, six-cylinder Audi A8 weighs 4,365 pounds. The sedan rides on a 122.4-inch wheelbase and is 204 inches long. That makes the Cadillac about 1.3 inches shorter than the smallest BMW 7 Series, but the Caddy is projected to tip the scales at less than both the big Bimmer and even the 5 Series, too. Cadillac wants the CT6 to be a luxury sedan that drivers can enjoy. In addition to the low weight, there's an available Active Chassis System throughout the range with rear-wheel steering and Magnetic Ride Control. When combined with the all-wheel-drive system, it means every corner of the car is both driving and steering the vehicle. Inside, the CT6 offers a ton of tech and luxury. Drivers are held in massaging, leather seats, and rear passengers also get adjustable chairs that are heated and cooled. Quad-zone climate controls keep everyone comfortable. Plus, in addition to the 34-speaker Bose audio system and streaming rearview mirror, there are features like a 10.2-inch CUE infotainment system with a capacitive touchscreen and console-mounted touchpad. The display also shows a 360-degree view outside and can even record video when the security system is activated.

Expect the Cadillac XT3 small crossover in late 2018

Cadillac's sedan-heavy lineup can't complete in this crossover-crazy market, it seems. The Detroit News spoke to Cadillac boss Johan de Nysschen and found out some more details about the brand's plan to alter its lineup to cater more to current consumer tastes. It's no surprise that these plans would include a small crossover, because de Nysschen has been talking about a vehicle smaller than the XT5 like this since at least 2015. The report also pins the Fairfax Assembly Plant, where GM builds the Buick LaCrosse and the Chevrolet Malibu, as the site for what could be called the XT3's production. That's not an immediately obvious choice, since the LaCrosse and Malibu are based on the latest evolution of the Epsilon platform, known as E2XX. And the XT5 is based on a crossover version of that same platform (known as C2XX), while XT3 is expected to be smaller than the XT5. So perhaps there's a different assembly line going into Fairfax, or the C2XX platform can be significantly shortened. We assume that the XT3 would be built on a smaller platform, perhaps the Gamma II that underpins the Chevrolet Trax and Buick Encore – which are built in either South Korea or Mexico, depending on which market they are to be exported to. The Encore is selling very well for Buick, with sales figures increasing through late last year. Another possibility is the D2XX platform that underpins the Chinese-built Buick Envision and the GMC Terrain and Chevrolet Equinox, perhaps with assembly happening at the CAMI plant in Ontario. At this early stage, without confirmation of GM as to what platform the XT3 will use or where it will really be built, it's too early to say what the Fairfax rumor means. This isn't the first time we've heard about a small Cadillac crossover. Back in 2015, de Nysschen told us to expect it sometime in 2018. But later that year, speaking to Reuters, he posited that it'd be closer to 2019. The Detroit News says de Nysschen told them it'll launch in the second half of 2018, splitting the difference between what we'd heard previously. Remember, Cadillac's only two vehicles in the segment are the XT5 and Escalade. We know that the brand is almost certainly scrambling to fill the holes in that side of the lineup. We think a three-row crossover will slot between the two, probably called the XT7.