2008 Cadillac Dts on 2040-cars

Auto blog

GM won't really kill off the Chevy Volt and Cadillac CT6, will it?

General Motors is apparently considering killing off six slow-selling models by 2020, according to Reuters. But is that really likely? The news is mentioned in a story where UAW president Dennis Williams notes that slumping US car sales could threaten jobs at low-volume factories. Still, we're skeptical that GM is really serious about killing those cars. Reuters specifically calls out the Buick LaCrosse, Cadillac CT6, Cadillac XTS, Chevrolet Impala, Chevrolet Sonic, and the Chevrolet Volt. Most of these have been redesigned or refreshed within the past few model years. Four - the LaCrosse, Impala, CT6, and Volt - are built in the Hamtramck factory in Detroit. That plant has made only 35,000 cars this year - down 32 percent from 2016. A typical GM plant builds 200,000-300,000 vehicles a year. Of all the cars Williams listed, killing the XTS, Impala, and Sonic make the most sense. They're older and don't sell particularly well. On the other hand, axing the other three seems like an odd move. It would leave Buick and Cadillac without flagship sedans, at least until the rumored Cadillac CT8 arrives. The CT6 was a big investment for GM and backing out after just a few years would be a huge loss. It also uses GM's latest and best materials and technology, making us even more skeptical. The Volt is a hugely important car for Chevrolet, and supplementing it with a crossover makes more sense than replacing it with one. Offering one model with a range of powertrain variants like the Hyundai Ioniq and Toyota Prius might be another route GM could take. All six of these vehicles are sedans, Yes, crossover sales are booming, but there's still a huge market for cars. Backing away from these would be essentially giving up sales to competitors from around the globe. The UAW might simply be publicly pushing GM to move crossover production to Hamtramck to avoid closing the plant and laying off workers. Sales of passenger cars are down across both GM and the industry. Consolidating production in other plants and closing Hamtramck rather than having a single facility focus on sedans might make more sense from a business perspective. GM is also trying to reduce its unsold inventory, meaning current production may be slowed or halted while current cars move into customer hands. There's a lot of politics that goes into building a car. GM wants to do what makes the most sense from a business perspective, while the UAW doesn't workers to lose their jobs when a factory closes.

GM extending warranties on Cadillac CTS-V and Chevy Camaro ZL1 for supercharger issue

Okay General Motors, we've sat by and watched you recall the compact cars, crossovers and pickup trucks, and aside from reporting on it, we've been fairly quiet. This, though, this will not do. We can almost tolerate the recalls on the bread-and-butter cars, but leave the performance vehicles alone.
According to a report from The Car Connection, GM has discovered a problem with the superchargers of the 6.2-liter V8s found in the Chevrolet Camaro ZL1 and the Cadillac CTS-V. Apparently, the issue rests around the internal bearing shaft grease, which can become contaminated (we aren't sure with what). If left unchecked, it'll first lead to a rattle at idle, which goes away under slight throttle. The real warning stage is when a high-pitched squeal develops, signaling that the bearing shaft has failed. Naturally, severe engine damage is the next step (although it's possible that the engine will also just refuse to turnover, although neither case is desirable).
According to TCC, GM will replace the superchargers on vehicles that have exhibited symptoms of bearing shaft failure free of charge. It will also, allegedly, be extending the warranty on all supercharged ZL1s and CTS-Vs to 10 years or 120,000 miles (whichever comes first), from the date of purchase. Officially, only 2009 to 2013 CTS-Vs and 2012 to 2013 ZL1s are suffering from this issue.

Cadillac CT6 uses aluminum to save 200 pounds

In Cadillac's recently launched ad campaign, the luxury brand's tagline is "Dare Greatly," and the two words suggest a brand willing to take big swings, even if they don't always connect. From what the company is promising, the forthcoming CT6 seems like an embodiment of that new motto. With an eventual range of turbocharged engines, reportedly including a turbo V8, a possible plug-in hybrid and streaming rearview mirror, the sedan is certainly pitched as tech showcase. Of course, extensive use of aluminum is practically mandatory to play in the luxury field these days, and Caddy is proving its latest creation can do that too. Despite the weighty appearance of the sedan's squared-off exterior, 64 percent of the CT6 is aluminum, including the entire exterior. Caddy claims that using so much of the lightweight metal sheds 198 pounds off the scales compared to using conventional steel. There still is some steel in the CT6; although it's predominately the high-strength variety. The engineers use the heavier metal for portions around the cabin and B-pillar for added safety. Cadillac also claims using steel "close-out panels" on lower portions of the sedan make the cabin quieter without needing as much sound deadening. The buildup to the CT6's public unveiling has been a long time coming after Cadillac pinned the flagship (for now) sedan's debut at the New York Auto Show nearly a year ago. When the sheet finally comes off on March 31, we get the first good idea about just how great Caddy's latest act of daring really is. Cadillac CT6 Elevates the Science of Mass Efficiency 2015-03-13 Technology DETROIT – Cadillac will use an advanced mixed-material approach for the lightweight body structure of the upcoming CT6 range-topping sedan. The structure is aluminum intensive, but the new Cadillac also includes 13 different materials customized for each area of the car to simultaneously advance driving dynamics, fuel economy and cabin quietness. The CT6 will debut March 31 at the New York International Auto Show and go into production late this year at General Motors' Detroit-Hamtramck assembly plant. "This is the rocket science of automobile construction and manufacturing today," said Cadillac President Johan de Nysschen.