2001 Cadillac Catera 3.0l 4spd V6 Clean History Florida Car Low Miles!!! on 2040-cars

Auto blog

GM Design shows what could have been and what might be

We periodically like to check in with GM Design's Instagram account to see what they're cooking up. Even better is when we catch a glimpse of an alternate history of what legendary designers from The General's past were thinking, though those ideas may not have made it into production. This week, for example, the account posted some illustrations from George Camp, whose career at GM spanned nearly four decades, from 1963 to 2001. One of the renderings is of what appears to be a 1971-72 Pontiac GTO Judge, but with two headlights instead of the production unit's quad beams. The rear departs from the canonical version most dramatically, with a massive integrated wing. Other bits that didn't make the production cut include large side vents, a gill-like side marker and rectangular intakes below the headlights that wouldn't be out of place on a modern design today. Amazingly, from what we can make out of the date, it appears that the drawing was done sometime in 1965, which makes it quite prescient.           View this post on Instagram                       A post shared by GM Design (@generalmotorsdesign) There's also a very aerodynamic interpretation of a Corvette ZR-1. To our eyes it splits the difference between the 1986 Corvette Indy concept and a fourth-generation F-body Pontiac Firebird, so perhaps parts of Camp's work on this sketch did make it into physical form. There's also a radical sports car concept from May 1970 that resembles the Mazda RX-500 concept from the same year, a Syd Mead-looking Cadillac coupe, and an Oldsmobile with a cool take on the company's trademark waterfall grille and elements of the Colonnade Cutlass at the rear. Other recent posts include a FJ Cruiser-like off-road EV, a sleek coupe with the Chevy corporate grille, and a rendering of a Silverado-esque pickup that looks far better than the current production version.           View this post on Instagram                       A post shared by GM Design (@generalmotorsdesign) It's pretty easy to lose hours in the account, but it's always fascinating to see GM's visions of what could have been and what might be. Related Video:

2015 Cadillac ATS, CTS recalled over brake issue

A problem with the brakes on the 2015 ATS and CTS has prompted Cadillac to issue a recall. According to the notice below from the National Highway Traffic Safety Administration, the issue revolves around the bracket that connects the brake pedal assembly and the rod that actuates the brakes. Even under normal operation, that bracket could fracture, impeding the ability to slow or stop the vehicle. That, as you're surely aware, could increase the risk of a crash. The issue affects a reported 2,163 vehicles in the United States. Owners will need to be bring their vehicles in to their local dealership to have those brackets replaced starting on August 1. See the complete recall notice below. RECALL Subject : Brake Pedal Bracket may Fracture Report Receipt Date: JUN 09, 2015 NHTSA Campaign Number: 15V358000 Component(s): SERVICE BRAKES, HYDRAULIC Potential Number of Units Affected: 2,163 Manufacturer: General Motors LLC SUMMARY: General Motors LLC (GM) is recalling certain model year 2015 Cadillac ATS and CTS vehicles. The affected vehicles have a bracket between the brake pedal assembly and the rod that actuates the brakes that may fracture during normal brake pedal operation. CONSEQUENCE: If the bracket fractures, the driver would not be able to apply the brakes, increasing the risk of a crash. REMEDY: GM will notify owners, and dealers will inspect the vehicle and replace any affected bracket, free of charge. The recall is expected to begin August 1, 2015. Owners may contact Cadillac customer service at 1-800-458-8006. GM's number for this recall is 15352. NOTES: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

Why GM will import the Cadillac CT6 PHEV from China

There's a clear-cut reason that General Motors is going to build its upcoming plug-in hybrid CT6 sedan in China. Sure, the car will be sold in China and the US, but the real reason for the "Made In China" stamp is environmental. If an automaker wants to build a new model in China, adding a green powertrain is an easy way to do that. The CT6 will have both a PHEV option as well as standard gas engine versions. David Leone, Cadillac's executive chief engineer, told AutoblogGreen recently that, "[China is] far more receptive to approving localized production of vehicle programs that have new energy vehicle powertrain applications." To put it succinctly, since the CT6 has a PHEV option, it is easier for GM to build all CT6 models in China. Some of them will then be imported to the US. "Most new global Cadillacs will also be produced in China as well. It's our second-largest market in the world." "To bring any new car into China, to produce it, you need government approval," Leone said. "The government isn't interested in bringing many new cars to market that don't have new energy credits. [The CT6] also provides new energy credits that enables it to be an attractive, well-received product in China." Leone said that there are two main markets for the various CT6 models: China and the US. The car will arrive in the 2017 model year, so some time after the end of June 2016. There are other practical reasons to build the PHEV in China, like the cells in the battery pack. Those are provided by LG Chem, which makes some cells in Michigan but more in South Korea. And GM already builds cars in China through its joint venture with SAIC, Shanghai General Motors, or SGM. "In February 2013 we started making the XTS, in summer of 2014 we started making the ATS-L," Leone said. "We will be producing [the CT6] within a number of months. Most new global Cadillacs will also be produced in China as well. It's our second-largest market in the world." The Chinese and US versions of the CT6 will be identical, Leone said. While some Cadillacs sold in China are slightly different than the US versions – the Chinese ATS is 77 millimeters longer, for example – the CTS6 PHEV will be exactly the same in both places, other than slight tweaks to the trim levels. Still, "more of our cars going forward will be the exact same car," he said. That doesn't mean that sales will be the same everywhere.