Coupe Awd Coupe 3.6l Di Cd 4-wheel Disc Brakes Abs Leather Xm Radio Mesh Grille on 2040-cars

Auto blog

Cadillac gives ATS, CTS new V6 for 2016

Replacing the existing 3.6-liter V6 in the Cadillac ATS and CTS is... another 3.6-liter V6. But this one promises higher output, while consuming less fuel, and making less noise. Like the V8s in the CTS-V and Escalade, it's got cylinder-deactivation technology to cut it down to a four-pot under lighter loads, as well as automatic stop/start, and comes mated to an eight-speed automatic transmission. The new engine produces 335 horsepower and 284 pound-feet of torque. That's a modest improvement over the 321 hp and 275 lb-ft mustered by the unit it replaces. But it also delivers an approximate improvement of nine percent in fuel economy and eight percent in carbon emissions. That's what we'd call a win-win, even if it's a modest one. Of course, those ATS or CTS buyers attracted to higher efficiency will still likely go for the 2.5-liter inline-four or the 2.0-liter turbo four. And those more inclined towards performance will be tempted by the 3.6-liter twin-turbo V6 in the ATS-V or CTS Vsport – or the 6.2-liter supercharged V8 in the CTS-V, for that matter. But those customers looking for the best of both worlds will surely be pleased by the improvements the new atmospheric V6 and 8-speed gearbox bring to the table. Related Video: New Technologies Boost Efficiency for 2016 CYLINDER DEACTIVATION AND START/STOP SYSTEMS BEGIN PRODUCTION ON ATS AND CTS PRODUCT LINES 2015-10-09 Renowned for luxury and design, Cadillac has recently added dynamic driving performance to its list of attributes. Now as 2016 model year production begins, Cadillac adds new fuel-saving technologies. Active Fuel Management and Automatic Stop/Start technologies, and widespread use of a new 8-speed transmission, are combining to raise fuel economy ratings and reduce emissions in Cadillac's portfolio. Cadillac's all-new six cylinder engine contains Active Fuel Management, or cylinder deactivation, technology enabling it to seamlessly switch from six-cylinder to four-cylinder operation under certain light-load conditions, while maintaining excellent performance. The new 3.6-liter engine is part of the 2016 ATS and CTS product lines. Additionally, the Cadillac Escalade luxury SUV's V8 will shift to four-cylinder operation in many daily driving conditions, as will Cadillac's all-new high performance CTS-V sedan.

Infiniti Q50 Red Sport 400 priced at $48,855, AWD at $50,855

Infiniti's most powerful production model, the new Q50 Red Sport 400, now has a starting price. You'll need at least $48,855 for the rear-drive model or $50,855 for all-wheel drive. (Both figures include the $905 destination charge.) A fully loaded, rear-drive Q50 RS400 with Direct Adaptive Steering, navigation, adaptive cruise control, a heated steering wheel, and Infiniti's entire alphabet soup of safety equipment, tops out at $57,045. (Again, add $2,000 for AWD). When it comes to rear-drive competition, the closest base price to the Q50 is the 320-hp BMW 340i. This German undercuts the Infiniti by two grand, $46,795 to $48,855. But the BMW outprices the Q50 as soon as you start selecting options. A 340i with similar equipment to a loaded Q50 Red Sport 400 costs just under $60,000. All-wheel-drive German competitors also lose out in the price war. Like with the rear-drive models, the BMW 340i xDrive undercuts the Q50 RS400 by around $2,000. Add the options, and the Infiniti becomes a better value. The other two big German rivals, the Audi S4 and Mercedes-Benz C450 AMG start at a higher price and only get more expensive. Technically the S4 starts cheaper than the Q50, but only with the standard manual transmission. Selecting the S-Tronic dual-clutch model kicks the price from $50,125 to $51,125, and going for the top-end Prestige trim will bump potential Audi owners up to $57,025. Throw on must-have S4 options, including adaptive cruise control, adaptive dampers, and a sport differential and you'll be shell out $64,425 for the Audi. The Mercedes-Benz C450 AMG is the priciest choice in this group, starting at $51,725, or roughly $900 more than a base Q50 RS400 with AWD. Options, again, are the downfall here. Building a C450 to match a loaded Infiniti will drive the Mercedes' price up to $64,315. While it occupies something of a weird space relative to these vehicles, it's also worth mentioning the Cadillac CTS VSport. It's the only car in this impromptu pricing comparo that can outgun the Q50, with its 3.6-liter, twin-turbo V6 good for 420 hp and 430 lb-ft of torque. It also starts at $60,950, although that includes plenty of standard equipment. All this means that the Q50 Red Sport 400 represents a relative value. It packs more power than the Germans – 80 more than the 340i, 67 more than the S4, and 38 more than the C450 – and a more comprehensive list of options, too.

Expect the Cadillac XT3 small crossover in late 2018

Cadillac's sedan-heavy lineup can't complete in this crossover-crazy market, it seems. The Detroit News spoke to Cadillac boss Johan de Nysschen and found out some more details about the brand's plan to alter its lineup to cater more to current consumer tastes. It's no surprise that these plans would include a small crossover, because de Nysschen has been talking about a vehicle smaller than the XT5 like this since at least 2015. The report also pins the Fairfax Assembly Plant, where GM builds the Buick LaCrosse and the Chevrolet Malibu, as the site for what could be called the XT3's production. That's not an immediately obvious choice, since the LaCrosse and Malibu are based on the latest evolution of the Epsilon platform, known as E2XX. And the XT5 is based on a crossover version of that same platform (known as C2XX), while XT3 is expected to be smaller than the XT5. So perhaps there's a different assembly line going into Fairfax, or the C2XX platform can be significantly shortened. We assume that the XT3 would be built on a smaller platform, perhaps the Gamma II that underpins the Chevrolet Trax and Buick Encore – which are built in either South Korea or Mexico, depending on which market they are to be exported to. The Encore is selling very well for Buick, with sales figures increasing through late last year. Another possibility is the D2XX platform that underpins the Chinese-built Buick Envision and the GMC Terrain and Chevrolet Equinox, perhaps with assembly happening at the CAMI plant in Ontario. At this early stage, without confirmation of GM as to what platform the XT3 will use or where it will really be built, it's too early to say what the Fairfax rumor means. This isn't the first time we've heard about a small Cadillac crossover. Back in 2015, de Nysschen told us to expect it sometime in 2018. But later that year, speaking to Reuters, he posited that it'd be closer to 2019. The Detroit News says de Nysschen told them it'll launch in the second half of 2018, splitting the difference between what we'd heard previously. Remember, Cadillac's only two vehicles in the segment are the XT5 and Escalade. We know that the brand is almost certainly scrambling to fill the holes in that side of the lineup. We think a three-row crossover will slot between the two, probably called the XT7.