Good Old Buick Roadmaster With A Bad Motor - '96 on 2040-cars
Saint Louis, Missouri, United States
Up for auction is a fine old Buick Roadmaster with a bad engine - won't crank. This car was running fine, all other running gear is in good shape: transmission is fine, brand new brakes on the front, replaced rotors, calipers and pads. New tires on original aluminum wheels. Even has the spare tire and jack.The body has no rust or collision damage, slight hail damage on the decks. Interior has no rips or serious wear, steering wheel has some worn spots in the leather.Use it for parts or fix or replace the motor and drive it for another 100K miles. The engine probably has some salvage/parts value, this is the same base model engine that was in the Corvette.Car can be picked up in St. Louis, or I can deliver it within 200 miles for $100.Cash or Check only.
|
Buick Roadmaster for Sale
- 1952 buick roadmaster estate wagon woodie 79r no reserve
- 1995 buick roadmaster estate wagon(US $7,995.00)
- 1953 buick roadmaster (custom show car)(US $35,000.00)
- 1938 buick roadmaster limousine(US $55,000.00)
- 1995 buick roadmaster estate wagon wagon 4-door 5.7l(US $2,250.00)
- 1947 buick roadmaster convertible. excellent condition in and out.
Auto Services in Missouri
Wright Automotive ★★★★★
Wilson auto repair & 24-HR towing ★★★★★
Waggoner Motor Co ★★★★★
Vanzandt?ˆ™s Auto Repair ★★★★★
Valvoline Instant Oil Change ★★★★★
Todd`s & Mark`s Auto Repair ★★★★★
Auto blog
Is Buick's surprise Detroit concept a Camaro-sized coupe?
Sun, Jan 10 2016Tomorrow night marks the unofficial start of the 2016 Detroit Auto Show. Keep your eyes peeled for a number of reveals, including a surprise debut from Buick. Yes, Buick. And we think it's going to be something really hot. According to a report from Bloomberg, the Tri-Shield's secret car could be a Camaro-sized sport coupe concept. As Bloomberg explains, it'd certainly gel with the impression the company is trying to put out – that it's no longer a brand for those with one foot in the grave. Introducing a sports coupe, even as a concept, could certainly reinforce that message. And if it happens to make production – which is not a certainty, Bloomberg's secret source says – it could certainly help Buick drive its average buyer age down from 59. Bloomberg doesn't offer any speculation on Buick's new coupe, but we have no problem making educated guesses. Our most reliable conjecture is this: it will ride on General Motors' Alpha platform, which underpins both the Camaro and the Cadillac ATS. And with a certain twin-turbocharged V6 in the GM stable, we've got an idea of what kind of engine could be shown. That speculation will have to suffice for now. But don't worry, we'll have official details, live images, and video tomorrow when Buick unveils its new concept in Detroit's Eastern Market.
2017 Buick LaCrosse an evolution of sharp Avenir concept
Wed, Nov 18 2015After years as a bloated, uninspiring, but comfortable near-premium sedan, Buick has taken the wraps off a leaner, lither, far more stylish LaCrosse. The third-generation model has just made its debut at the 2015 Los Angeles Motor Show. While there's a lot to talk about, let's first address the new, Avenir-inspired sheetmetal. The fascia is basically the concept car smoothed over into production form, featuring the same winged trishield. In place of the chrome-trimmed waterfall, the LaCrosse gets a blacked-out, recessed grille with a chrome surround. It looks good in photos but it's better in person, adding a real sense of complexity and depth to the front end. The headlights and lower fascia, meanwhile, adhere closely to the concept. The same cannot be said of the LaCrosse's tail. While the taillight lighting pattern is similar, the overall shape of the lighting element is radically different, refining the design featured on the back of the Regal. Also gone, sadly, is the Avenir's boattail rear deck. Instead, the LaCrosse gets a small rear deck that curves up into a pleasant duckbill spoiler. The rest of the tail is pleasantly restrained. Perhaps the weakest point is the profile, where Buick has instituted a "split-spear" design, featuring a strong shoulder line above the rear wheel well, which sits below an even stronger character line that curves down and towards the front of the car. It strikes us as just a little too much, like the Impala. Underneath that sheetmetal, Buick has managed to trim nearly 300 pounds of body fat, nearly half of which came from the vehicle's actual structure. That 300 lbs, according to Buick's engineers, is equivalent to a Kenmore side-by-side refrigerator, in case you needed a helpful comparison. Despite the weight savings, Buick has upped the torsional rigidity for this new model by 15 percent. The LaCrosse's cabin features a strong, cockpit-like design, with a high, floating-bridge center console. This is possible due to Buick's adaption of the Electronic Precision Shift system, introduced earlier this month on the new Cadillac XT5. Despite the new-fangled console design, Buick's retained the wraparound cabin style introduced on the second-gen model. Based on a quick crawl around the interior, space is great in front, although ingress in back is somewhat difficult due to the roofline. You're probably wondering why we haven't said anything about the mechanicals just yet.
Buick confirms US-market Envision CUV to be built in China
Fri, Dec 4 2015As expected, the Buick Envision will come to the US market in 2016, and as rumored, it'll be GM's first product imported from the People's Republic. Buick confirmed the news today, while also releasing a number of technical details on the mid-size CUV, which has sold nearly 130,000 units in the Chinese domestic market in the first 11 months of 2015. When it arrives in US dealers next summer, the Envision will feature a 2.0-liter, turbocharged four-cylinder EcoTec four-cylinder. Good for an estimated 252 horsepower and 260 pound-feet of torque, the four-pot turbo is paired to a well-received six-speed Hydra-Matic 6T70 transmission. That's the same automatic gearbox that's offered in the turbocharged Regal and Regal GS and the current six-cylinder LaCrosse. The entire affair is underpinned by torque-steer-fighting HiPer strut front suspension, a crossover first for Buick, with a four-link setup in back. According to Buick, the Envision will also get the same Active Twin Clutch all-wheel-drive system being offered on the Cadillac XT5 and the new LaCrosse. Like the Chinese-market Envision, Buick is offering the USDM model with active grille shutters, LED running lights, LED taillights, heated front/rear seats, a heated steering wheel, 19-inch wheels, and a Bose stereo as standard. Buick also lists highlights like Active Noise Cancellation and an eight-inch IntelliLink infotainment system, although it's not clear whether these are standard features. There's no word on which auto show the Envision will debut at. Considering the timing, next month's Detroit Auto Show is a strong contender, although if Buick wanted to really drum up headlines ahead of its on-sale date next summer, it'd formally introduce its newest CUV in April, at the New York Auto Show. Either way, expect to see more of this handsome, Chinese-built CUV soon. Related Video: Buick Envision North American Market Fact Sheet 2015-12-04 The Buick Envision was designed, engineered and tested in Michigan as a world-class luxury crossover to challenge the world's best competition. It was awarded Motor Trend SUV of the Year in China and has 127,085 sales so far this year. When it goes on sale in 2016, it will play an important role in a crossover lineup that currently represents 60 percent of Buick sales in North America. It targets customers shopping between the Encore, the best-selling Buick in eight years, and the Enclave, which has continued to grow its customer base since its 2007 introduction.