1994 Buick Roadmaster Hearse By Superior on 2040-cars

Auto blog

2017 Buick LaCrosse an evolution of sharp Avenir concept

After years as a bloated, uninspiring, but comfortable near-premium sedan, Buick has taken the wraps off a leaner, lither, far more stylish LaCrosse. The third-generation model has just made its debut at the 2015 Los Angeles Motor Show. While there's a lot to talk about, let's first address the new, Avenir-inspired sheetmetal. The fascia is basically the concept car smoothed over into production form, featuring the same winged trishield. In place of the chrome-trimmed waterfall, the LaCrosse gets a blacked-out, recessed grille with a chrome surround. It looks good in photos but it's better in person, adding a real sense of complexity and depth to the front end. The headlights and lower fascia, meanwhile, adhere closely to the concept. The same cannot be said of the LaCrosse's tail. While the taillight lighting pattern is similar, the overall shape of the lighting element is radically different, refining the design featured on the back of the Regal. Also gone, sadly, is the Avenir's boattail rear deck. Instead, the LaCrosse gets a small rear deck that curves up into a pleasant duckbill spoiler. The rest of the tail is pleasantly restrained. Perhaps the weakest point is the profile, where Buick has instituted a "split-spear" design, featuring a strong shoulder line above the rear wheel well, which sits below an even stronger character line that curves down and towards the front of the car. It strikes us as just a little too much, like the Impala. Underneath that sheetmetal, Buick has managed to trim nearly 300 pounds of body fat, nearly half of which came from the vehicle's actual structure. That 300 lbs, according to Buick's engineers, is equivalent to a Kenmore side-by-side refrigerator, in case you needed a helpful comparison. Despite the weight savings, Buick has upped the torsional rigidity for this new model by 15 percent. The LaCrosse's cabin features a strong, cockpit-like design, with a high, floating-bridge center console. This is possible due to Buick's adaption of the Electronic Precision Shift system, introduced earlier this month on the new Cadillac XT5. Despite the new-fangled console design, Buick's retained the wraparound cabin style introduced on the second-gen model. Based on a quick crawl around the interior, space is great in front, although ingress in back is somewhat difficult due to the roofline. You're probably wondering why we haven't said anything about the mechanicals just yet.

The new Buick Regal looks like a Mazda, and we're totally cool with that

Yes, this undisguised Opel Insignia, which will be brought here as the next Buick Regal, looks a lot like a Mazda. You can see it in the grille and headlights, especially – in fact, if you look at one of the photos with tape blocking out the badge in the middle of the winged grille, you might think this is a new Mazda6. The thing is, Mazdas look pretty darn good, so no one's complaining. And when you look at the rest of the car, there's a fair amount of originality going on. Aside from the GM-generic taillights (they look like they could fit on a Chevy, right?) the lines and details are all pretty fresh, and there are some design elements pulled from Buick's gorgeous Avista concept. A sweeping roofline leads to some healthy shoulders at the back, creating a coupe-ish profile with a very abbreviated rear deck. This appears to be a hatchback model and not the four-door sedan, but the general look should carry over. This is definitely a big improvement over the somewhat bulbous current-generation Regal, which also started life out as an Insignia. The car shown here is the Insignia OPC model, with Brembo brakes, big wheels, side skirts, and a front end with big (likely fake) intakes. It will most likely translate to a Regal GS for our market, as is the case with the current OPC and GS. The new Regal/Insignia is expected to use the same platform as the new Buick LaCrosse, which is also shared by the Chevy Malibu and Impala. They should once again be available with front- or all-wheel drive and a choice of turbocharged four-cylinder engines. Rumor has the Opel versions debuting at the Geneva show March, and the Buick would likely follow, possibly in New York in April. View 13 Photos And then there's the wagon. All signs point to Buick finally bringing the most practical Insignia to our market as a Regal. We got wind of a focus group testing the idea, Buick has trademarked the name Regal Tour X. That version would likely go up against the Audi Allroad in the classy, slightly lifted all-wheel-drive wagon category, basically acting as an almost-crossover for people who want a wagon but won't admit it to themselves. The Insignia wagon caught here is also an OPC, and we think it looks even more handsome than the hatch-sedan shown above. The trim piece stretching from the base of the A-pillar all the way up and back down to the tail is a nice touch in profile view, although we're not so sure about how it terminates abruptly at the taillight.

Chevy Bolt-based prototype may be a Buick EV for China

Late last spring, we got a look at a GM prototype that was clearly based on the Chevy Bolt EV, but with updated styling. It seemed like it could be a more crossover-styled Bolt, given the recently trademarked name of EUV. Now we get another look at the prototype, but the bodywork seems less suggestive of a Chevy, and more of a Buick. This vehicle definitely still appears to be based on the Bolt, rather than on another small GM platform. In the photos of it next to the current model, the size, wheelbase and profile are extremely similar. There are differences, though. The nose isn't as sloped or as rounded, and the rear window kicks up a little earlier. The biggest changes are in the front and rear fascias, and it's here that we see hints of Buick. There are prominent air inlets on each side of the front bumper that give the car a more aggressive look. The headlights still have a fairly rounded, organic look, but with little extensions like fangs underneath. The styled running-light section, rounded shape and the smoked lenses seem very Buick-like. The grille features a large badge that doesn't fit the shape of a bow-tie, and is more that of a round logo like Buick's. Around at the back, the full-width taillights stand out, and in the middle there is obviously a round badge, again like a Buick. The wide taillights would also be a natural evolution of Buick's current light design language that uses somewhat wide and thin lights. The rear bumper has been redesigned with new lower taillights. Now that we've established that this seems very much like a Buick, we don't think we'll see this particular version offered here with the badge. This is more likely a Buick version of the Bolt for the Chinese market, where the brand is associated with luxury and has been the spearhead for GM's electric and hybrid models. In fact, the Chevy Volt hybrid was sold there as the Buick Velite 5, which was part of a family of a electrified Velite models. This would probably also carry a Velite badge as well. While we might not see this specific Buick variant, we probably will see it offered as a Chevy in some form. With its more aggressive, crossover shape, it could be the rumored EUV model. Or it could be just a refresh of the current Bolt, since the model has been largely unchanged since its introduction for the 2017 model year. And extrapolating from this prototype, we can see how the headlights could be tweaked to tie into those air scoops as on the Suburban and Silverado.