1964 Buick Riviera on 2040-cars

Auto blog

2017 Buick LaCrosse an evolution of sharp Avenir concept

After years as a bloated, uninspiring, but comfortable near-premium sedan, Buick has taken the wraps off a leaner, lither, far more stylish LaCrosse. The third-generation model has just made its debut at the 2015 Los Angeles Motor Show. While there's a lot to talk about, let's first address the new, Avenir-inspired sheetmetal. The fascia is basically the concept car smoothed over into production form, featuring the same winged trishield. In place of the chrome-trimmed waterfall, the LaCrosse gets a blacked-out, recessed grille with a chrome surround. It looks good in photos but it's better in person, adding a real sense of complexity and depth to the front end. The headlights and lower fascia, meanwhile, adhere closely to the concept. The same cannot be said of the LaCrosse's tail. While the taillight lighting pattern is similar, the overall shape of the lighting element is radically different, refining the design featured on the back of the Regal. Also gone, sadly, is the Avenir's boattail rear deck. Instead, the LaCrosse gets a small rear deck that curves up into a pleasant duckbill spoiler. The rest of the tail is pleasantly restrained. Perhaps the weakest point is the profile, where Buick has instituted a "split-spear" design, featuring a strong shoulder line above the rear wheel well, which sits below an even stronger character line that curves down and towards the front of the car. It strikes us as just a little too much, like the Impala. Underneath that sheetmetal, Buick has managed to trim nearly 300 pounds of body fat, nearly half of which came from the vehicle's actual structure. That 300 lbs, according to Buick's engineers, is equivalent to a Kenmore side-by-side refrigerator, in case you needed a helpful comparison. Despite the weight savings, Buick has upped the torsional rigidity for this new model by 15 percent. The LaCrosse's cabin features a strong, cockpit-like design, with a high, floating-bridge center console. This is possible due to Buick's adaption of the Electronic Precision Shift system, introduced earlier this month on the new Cadillac XT5. Despite the new-fangled console design, Buick's retained the wraparound cabin style introduced on the second-gen model. Based on a quick crawl around the interior, space is great in front, although ingress in back is somewhat difficult due to the roofline. You're probably wondering why we haven't said anything about the mechanicals just yet.

GM recalling 1.5M cars in China for faulty bracket

General Motors and its Chinese partners have announced their second recall in the People's Republic this year, following a 2,653-unit recall of the Cadillac SRX earlier this year. This latest recall affects nearly 1.5 million cars built between 2006 and 2012. It's not explicitly stated, but as there's no movement from the US NHTSA, we suspect that the cars in question were all Chinese-built rather than imports.
The vast majority of the affected vehicles are Buick Excelles (pictured), with 1.2 million units being recalled over a faulty bracket that's meant to secure the fuel pump. The Excelles in question were built between 2006 and 2012, while an additional 250,000 Chevrolet Sail superminis, built between April 2009 and October 2011, are being recalled for a similar reason.
According to the PRC's Administration for Quality Supervision, Inspection and Quarantine, the faulty bracket could crack and potentially cause a fuel leak.

Buick Velite 6 to come in PHEV, electric versions for China

In addition to the all-electric Enspire crossover concept revealed this week ahead of the Beijing Auto Show, Buick is adding a new production variant to its Velite series of electrified vehicles for China. It's called the Velite 6, a plug-in hybrid that will launch this year in Buick's largest market. A full-electric version, shown in the lead photo above at right, is coming later. Buick already sells a vehicle called a Velite 5 in China, which is essentially a rebadged Chevrolet Volt, only with a higher electric-only driving range. This one is based on the Velite concept PHEV introduced in late 2016 at Auto Guangzhou. The PHEV and battery-electric versions look nearly identical, with a wide stance, plenty of creases and a hatchback design that bears some similarities to the longer 2018 Regal TourX wagon. The Velite 6 uses two AC permanent-magnet synchronous motors, a lithium-ion battery and a 1.5-liter four-cylinder combustion engine. Buick says combined gas-electric driving range is 435 miles, which is 15 miles greater than the Volt. Buick will assemble what it calls the "new-generation" ternary battery pack at its new SAIC-GM Power Battery Development Center in Shanghai. The company says the Velite 6 electric vehicle "will adopt a new-generation pure electric drive system to offer customers a smooth, quiet and natural driving experience." Both models get the cloud-based Buick eConnect technology, which allows over-the-air software updates, real-time integration with China's WeChat social media network, and other digital perks. Owners will also be able to use their smartphone as the vehicle's key, and they can also authorize others to use the car through their phones. China has long been Buick's largest market, with more than 1.18 million vehicles sold in 2017 compared to just 219,231 in the U.S., and the country has established aggressive mandates for production of electric vehicles. GM has plans to add 20 new electric and fuel-cell vehicles globally by 2023. Related Video: