1988 Buick Regal Custom Coupe 2-door 2.8l on 2040-cars

Auto blog

Buick shows US dealers 2016 Cascada convertible

The affordable four-seat convertible has become a largely forgotten genre in the States, especially with the death of the Chrysler 200 Convertible. Of course, there are still premium options from Audi, BMW and Mercedes-Benz - not to mention more overtly performance-oriented droptop pony cars from Chevrolet and Ford - but if you want an affordable cruiser, you're kind of out of luck. That may be about to change, however, with renewed rumors of the Opel Cascada (pictured above) making it across the Atlantic wearing a Buick badge.
According to GM Inside News, Buick showed off the Cascada to US dealers last week, with renewed word that the company plans to bring it over from Europe for the 2016 model year. The US version will reportedly be practically identical to its German cousin in terms of styling, but the powertrain underneath is less certain. According to GMI, it may use the 1.6-liter turbocharged four-cylinder that is available in Europe with either 168 horsepower or 197 hp.
The Cascada rides on GM's Delta II platform, which also underpins the Verano, and the latest rumor certainly provides even more evidence that the convertible is probably on the way. Speculation about the droptop started when GM CEO Dan Akerson said last year that the car was on his wish list to bring over. Then, the US trademark on the name was reserved earlier this year, and the release was speculated for sometime in early 2016.

GM seeks to exempt Buick Envision from U.S. auto tariffs

General Motors is seeking an exemption to a 25 percent U.S. tariff on its Chinese-made Buick Envision sport utility, the automaker said on Thursday, in a move to prevent the key model in the brand's U.S. lineup from becoming a victim of the U.S.-China trade war. The midsize SUV, priced starting at about $35,000, has become a target for critics of Chinese-made goods, including leaders of the United Auto Workers union and members in key political swing states such as Michigan and Ohio. The Envision, assembled only in China, last year accounted for about 19 percent of Buick brand sales in the United States. GM said in a statement that it filed the request on July 30 with the U.S. Trade Representative. An official notice was posted on Thursday on the regulations.gov website, which is tracking requests for exclusions from the so-called Section 301 tariff on certain imported goods from China. GM, the largest U.S. automaker, argued in its request that Envision sales in China and the United States would generate funds "to invest in our U.S. manufacturing facilities and to develop the next generation of automotive technology in the United States." GM said the "vast majority" of Envisions, about 200,000 a year, are sold in China. About 41,000 were sold last year in the United States. Because of the lower U.S. sales volume, "assembly in our home market is not an option" for the Envision, which competes with such midsize crossover vehicles as the Jeep Grand Cherokee and the Cadillac XT5. GM has taken other steps to soften the blow of tariffs, which hit just as the automaker had lowered the price of the Envision to make it more competitive. Ahead of the July 6 start for higher import tariffs, GM shipped in a six-month supply of Envisions at the much lower 2.5 percent tariff rate. Envision sales from April through June plunged to just 7,000 vehicles, while inventories climbed to more than 13,000 vehicles at the end of June. At the current sales rate, the Envision supply should be enough to keep many dealers stocked through the end of the year. GM had lowered prices by as much as $2,500 on the 2019 models, which it started shipping in late April. That means Buick's 2,000 U.S. dealers should have lower-priced Envisions to sell well into the fall. "The previous price point was too high" on the 2018 Envision, said Casey Clark, sales manager at Serra Buick GMC Cadillac in Washington, Michigan, in an interview.

GM cutting vehicle trim options to save money for electrification

Information continues to filter out about GM's plans based on comments the automaker made during its Capital Markets Day event in February. GM President Mark Reuss said the company's push to save money by rationalizing the number of build combinations will continue in 2020, carrying on the work done in 2019. As GM Authority covers, last year, the carmaker cut 3,500 components across model lines, a 12% drop in the number of parts it needed to stock in its plants. Reuss used the next-generation Chevolet Equinox and GMC Terrain as examples for more cost efficiencies, saying build possibilities — which include international markets and their options — will be cut by more than 50%, and use more shared parts. "We will reduce total trim levels on Equinox and Terrain from eight to six," Reuss said, "reduce engine variants from 11 to 5, reduce build combinations from more than 200 to less than 100 per program, and see significant cost savings of an already paid-for architecture that took the mass out, helping us self-fund electrification programs." GM will plow a large amount of the money it saves into its ambitious EV program. In 2017, the automaker said it intends to have 20 electric vehicles on the market by the end of 2023, some of which could be shared between brands. An automotive analyst at Seeking Alpha and a piece in Automobile attempted to put specifics to what we should expect. As Automobile points out, the first two EVs in the 20-car program are already on sale, being the Ariv Meld and Ariv Merge eBikes available in Belgium and The Netherlands. We've seen the Cruise Origin autonomous rideshare taxi, although we don't know when it will hit the road. The next three, which we should see in the metal shortly, are two Cadillac EVs and the GMC Hummer EV pickup. The Cadillac pair are expected to be sized like the XT4 and XT5, and along with the Hummer, should hit the market starting in late 2021.