1989 Buick Reatta 2dr Coupe 3.8l V6 Auto No Accidents Hughes Aircraft No Rust on 2040-cars

Auto blog

Buick really wants us to know the new Cascada convertible won't leak

Quality testing on the factory floor is nothing to joke about. Automakers need to make sure the work being done is up to snuff, and that means some extensive checks. For Buick, that means using a lot of water for each of its Cascada convertibles. Each vehicle that rolls off the floor is subject to a high-pressure, ten-minute soaking that sprays nearly 20 gallons of water from each nozzle during every bath, just to guarantee the fabric roof hasn't sprung any leaks. For some reason, Buick has chosen to show off this testing with the help of what we imagine is the Gorton's Fisherman's baby cousin. Check out the strange testing video, available up top.

Buick celebrates 110 years by naming most significant model of each decade

In May of 1903, Buick began work on its first vehicle, the 1904 Model B, the first example of which was sold to a doctor in Flint, Michigan. That first sale was appropriate since later on, Buick became known as a "doctor's car." The Model B is the first of 11 cars chosen by Buick to highlight each decade of the company's 110-year history.
The 1916 D-45 Touring with a six-cylinder engine was Buick's highest seller that year, and helped push overall sales past six figures for the first time, making Buick the top-selling automotive brand. In 1931, Series 50 got an eight-cylinder engine, which helped the company survive the Great Depression. The 1936 Century was the first Buick that could hit 100 miles per hour, the 1949 Roadmaster had a supporting role in Rain Man, the 1953 Skylark had Italian wire wheels and the owner's name engraved on its steering wheel.
Then we have the iconic 1963 Riviera, the V6-powered 1975 Regal, and in 1987, the legendary GNX. With a turbocharged, intercooled V6 pumping out 276-horsepower it could hit 60 mph in just 4.6 seconds. In 1999 Buick built the first car in China, the Century, and that country remains the brand's largest market.

2017 Buick LaCrosse an evolution of sharp Avenir concept

After years as a bloated, uninspiring, but comfortable near-premium sedan, Buick has taken the wraps off a leaner, lither, far more stylish LaCrosse. The third-generation model has just made its debut at the 2015 Los Angeles Motor Show. While there's a lot to talk about, let's first address the new, Avenir-inspired sheetmetal. The fascia is basically the concept car smoothed over into production form, featuring the same winged trishield. In place of the chrome-trimmed waterfall, the LaCrosse gets a blacked-out, recessed grille with a chrome surround. It looks good in photos but it's better in person, adding a real sense of complexity and depth to the front end. The headlights and lower fascia, meanwhile, adhere closely to the concept. The same cannot be said of the LaCrosse's tail. While the taillight lighting pattern is similar, the overall shape of the lighting element is radically different, refining the design featured on the back of the Regal. Also gone, sadly, is the Avenir's boattail rear deck. Instead, the LaCrosse gets a small rear deck that curves up into a pleasant duckbill spoiler. The rest of the tail is pleasantly restrained. Perhaps the weakest point is the profile, where Buick has instituted a "split-spear" design, featuring a strong shoulder line above the rear wheel well, which sits below an even stronger character line that curves down and towards the front of the car. It strikes us as just a little too much, like the Impala. Underneath that sheetmetal, Buick has managed to trim nearly 300 pounds of body fat, nearly half of which came from the vehicle's actual structure. That 300 lbs, according to Buick's engineers, is equivalent to a Kenmore side-by-side refrigerator, in case you needed a helpful comparison. Despite the weight savings, Buick has upped the torsional rigidity for this new model by 15 percent. The LaCrosse's cabin features a strong, cockpit-like design, with a high, floating-bridge center console. This is possible due to Buick's adaption of the Electronic Precision Shift system, introduced earlier this month on the new Cadillac XT5. Despite the new-fangled console design, Buick's retained the wraparound cabin style introduced on the second-gen model. Based on a quick crawl around the interior, space is great in front, although ingress in back is somewhat difficult due to the roofline. You're probably wondering why we haven't said anything about the mechanicals just yet.