2000 Buick Lesabre Custom on 2040-cars

Auto blog

GM laying off 510 amidst slow Cadillac, small car sales

General Motors is laying off about 510 workers from two factories beginning in January, and it could be months before the automaker needs some of that latent capacity to come back on line. A combination of poor sales and high dealer inventories are prompting the cutbacks, according to Automotive News.
The largest changes come at GM's Lansing Grand River plant, where the Cadillac ATS and CTS are made. An entire shift of about 350 workers is being laid off, but the automaker hopes to find positions for some of them at other nearby factories. The decision leaves just a single shift building vehicles there. According to Automotive News, the move is partially spurred by Johan de Nysschen's plan to make Cadillac a more exclusive brand.
The lost shift will likely return for production of the next-generation Chevrolet Camaro at the plant, according to the report, but GM isn't saying when that will be. A previous announcement from the Canadian Auto Workers union indicated that the Oshawa, Ontario, factory would lose the coupe in late 2015 or early 2016.

GM follows up Lambda CUV stop-sale with tire recall

In late January, General Motors announced a stop-sale for about 6,281 examples of the 2015 Chevrolet Traverse, GMC Acadia and Buick Enclave because of the possibility for the treads cracking on their 18-inch Goodyear Fortera HL tires. At the time, GM said that this would also eventually lead to a safety campaign to repair the problem, and the National Highway Traffic Safety Administration has just published those details. GM's recall covers 5,876 of the three Lambda platform crossovers to replace their tires. According to NHTSA, if the treads crack, there could be a loss of pressure and possible failure. Goodyear already announced its own recall of the tires after internal testing found small tread cracks. The company did not believe this was safety issue, but the problem did put the rubber out of compliance with federal laws. The business's safety campaign covered an estimated 48,512 tires. Of those, around 32,000 were reportedly made for GM to either be fitted to vehicles or sold as replacements. The remainder went to the aftermarket. Goodyear's portion of the recall is expected to begin around February 20. RECALL Subject : Tire Tread Cracking/FMVSS 110 Report Receipt Date: JAN 28, 2015 NHTSA Campaign Number: 15V044000 Component(s): TIRES Potential Number of Units Affected: 5,876 All Products Associated with this Recall Vehicle Make Model Model Year(s) BUICK ENCLAVE 2015 CHEVROLET TRAVERSE 2015 GMC ACADIA 2015 Details Manufacturer: General Motors LLC SUMMARY: General Motors LLC (GM) is recalling certain model year 2015 Buick Enclave vehicles manufactured December 9, 2014, to January 14, 2015, 2015 Chevrolet Traverse vehicles manufactured December 9, 2014, to January 20, 2015, and 2015 GMC Acadia vehicles manufactured December 9, 2014, to January 16, 2015, and all equipped with Goodyear P255/65R18 Fortera HL tires. These vehicles are equipped with tires that may experience tread cracking. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) No. 110, "Tire Selection and Rims and Motor Home/Recreation Vehicle Trailer Load Carrying Capacity Information for Motor Vehicles with a GVWR of 4,536 kilograms (10,000 pounds) or Less." CONSEQUENCE: If the tire treads crack, a loss of tire pressure and possible tire failure may result, increasing the risk of a crash. REMEDY: GM will notify owners, and dealers will replace the tires that were manufactured within a specific date range, free of charge.

2018 Buick Enclave: How engineers made it larger, lighter, more sophisticated

Buick used the unveiling of the 2018 Enclave at the New York Auto Show to introduce its new range-topping Avenir sub-brand to the world. With fancier interior finishes and exterior details, it's Buick's latest effort to make itself a proper luxury brand (or perhaps re-establish itself as such). However, lost in the Avenir song and dance is the fact that the 2018 Buick Enclave is a (very) long-awaited all-new model regardless of the trim level one selects. Like the Chevrolet Traverse upon which it is based, the new Enclave is bigger than the vehicle it replaces but considerably lighter, by about 400 pounds. "We told every engineer, 'get your job done, but then take the weight out,'" said engineer Rick Spina as we hovered next to his larger yet lighter creation. His team therefore set about taking a little bit of weight out from just about everywhere, from using additional aluminum in the suspension to varying the thickness of the frame (thicker in places that needed to be stronger, thinner and therefore lighter in places that didn't). Only about 100 pounds came out of the body with the rest coming from elsewhere. Not only will the reduced weight improve fuel economy (Buick-estimated at 19 mpg combined with FWD versus 18 for the 2017 model) and presumably the old Enclave's rather ponderous handling, but it should only make things easier for the new powertrain: General Motors' now-familiar 3.6-liter V6 and its latest nine-speed automatic. With 302 horsepower and 260 pound-feet of torque, Buick says the new engine will need 7.2 seconds to reach 60 mph with FWD or 7.5 seconds with AWD. That's a second quicker than before. Besides acceleration, towing is also bumped up by 500 pounds to 5,000. For those models with all-wheel drive, the Enclave has the same basic system featured on range-topping versions of the Buick LaCrosse. Besides power being sent front and rear, it can also differ from right to left in the back, although Spina is quick to point out that capability is for traction-enhancing purposes rather than sporty, handling-enhancing torque-vectoring ones. Buick owners already appreciated the Enclave for its quietness so the engineers decided to take it that much further. This included altering the exhaust, improving body sealing (there are triple door seals), including active sound deadening and utilizing advanced materials that absorb sound as opposed to simply being thick, dense and heavy enough to keep it out.