1987 Buick Grand National on 2040-cars

Auto blog

Fingers point to dragged-out NHTSA investigation after second death by ARC airbag inflator

Safety advocates have increased criticism of the federal government's National Highway Traffic Safety Administration after an exploding airbag inflator that's been under investigation for more than six years killed a second person.  On Wednesday, NHTSA posted recall documents filed by General Motors that revealed the second death, the driver of a 2015 Chevrolet Traverse SUV with an inflator made by Tennessee company ARC blew apart, spewing shrapnel. No details were given about where and when the death occurred. NHTSA has said that ARC Automotive of Knoxville has manufactured about 8 million inflators used nationwide in vehicles made by General Motors, Fiat Chrysler (now Stellantis), Kia and Hyundai. “NHTSA should have been all over this along time ago,” said Rosemary Shahan, president of California-based Consumers for Auto Reliability and Safety. “There's just no denying that itÂ’s a (safety) defect.” NHTSA, the agency charged with with keeping America's automobiles and roads safe, began investigating ARC inflators in July of 2015 after two people were injured by flying shrapnel. The investigation became more urgent in 2016, when a Canadian woman driving an older Hyundai Elantra was killed by metal airbag fragments. Public records show only a little progress on the probe. In April, the agency posted a memo in saying it was reviewing volumes of information it received from ARC. Safety advocates such as Shahan say that the dragged-out investigation is an example of the deadly consequences that can result from an understaffed and underfunded agency. The second death should not have happened, Shahan said, and vehicles with faulty ARC inflators should have been recalled faster. The agency, Shahan said, is “grossly underfunded," but it still should have sought recalls of the ARC inflators. She said historically NHTSA has taken little action during Republican administrations but has ramped up safety efforts when Democrats control the White House. Messages were left Wednesday by the Associated Press seeking comment from NHTSA and ARC. At this time, relatively few vehicles are effected. The GM recall covers only 550 Chevy Traverse SUVs from the 2013 through 2017 model years, as well as Buick Enclave SUVs from 2008 through 2017. The automaker said in a statement that the faulty front driver's airbag inflators were either installed at the factory or in replacement airbag modules.

2017 Buick LaCrosse an evolution of sharp Avenir concept

After years as a bloated, uninspiring, but comfortable near-premium sedan, Buick has taken the wraps off a leaner, lither, far more stylish LaCrosse. The third-generation model has just made its debut at the 2015 Los Angeles Motor Show. While there's a lot to talk about, let's first address the new, Avenir-inspired sheetmetal. The fascia is basically the concept car smoothed over into production form, featuring the same winged trishield. In place of the chrome-trimmed waterfall, the LaCrosse gets a blacked-out, recessed grille with a chrome surround. It looks good in photos but it's better in person, adding a real sense of complexity and depth to the front end. The headlights and lower fascia, meanwhile, adhere closely to the concept. The same cannot be said of the LaCrosse's tail. While the taillight lighting pattern is similar, the overall shape of the lighting element is radically different, refining the design featured on the back of the Regal. Also gone, sadly, is the Avenir's boattail rear deck. Instead, the LaCrosse gets a small rear deck that curves up into a pleasant duckbill spoiler. The rest of the tail is pleasantly restrained. Perhaps the weakest point is the profile, where Buick has instituted a "split-spear" design, featuring a strong shoulder line above the rear wheel well, which sits below an even stronger character line that curves down and towards the front of the car. It strikes us as just a little too much, like the Impala. Underneath that sheetmetal, Buick has managed to trim nearly 300 pounds of body fat, nearly half of which came from the vehicle's actual structure. That 300 lbs, according to Buick's engineers, is equivalent to a Kenmore side-by-side refrigerator, in case you needed a helpful comparison. Despite the weight savings, Buick has upped the torsional rigidity for this new model by 15 percent. The LaCrosse's cabin features a strong, cockpit-like design, with a high, floating-bridge center console. This is possible due to Buick's adaption of the Electronic Precision Shift system, introduced earlier this month on the new Cadillac XT5. Despite the new-fangled console design, Buick's retained the wraparound cabin style introduced on the second-gen model. Based on a quick crawl around the interior, space is great in front, although ingress in back is somewhat difficult due to the roofline. You're probably wondering why we haven't said anything about the mechanicals just yet.

The new Buick Regal looks like a Mazda, and we're totally cool with that

Yes, this undisguised Opel Insignia, which will be brought here as the next Buick Regal, looks a lot like a Mazda. You can see it in the grille and headlights, especially – in fact, if you look at one of the photos with tape blocking out the badge in the middle of the winged grille, you might think this is a new Mazda6. The thing is, Mazdas look pretty darn good, so no one's complaining. And when you look at the rest of the car, there's a fair amount of originality going on. Aside from the GM-generic taillights (they look like they could fit on a Chevy, right?) the lines and details are all pretty fresh, and there are some design elements pulled from Buick's gorgeous Avista concept. A sweeping roofline leads to some healthy shoulders at the back, creating a coupe-ish profile with a very abbreviated rear deck. This appears to be a hatchback model and not the four-door sedan, but the general look should carry over. This is definitely a big improvement over the somewhat bulbous current-generation Regal, which also started life out as an Insignia. The car shown here is the Insignia OPC model, with Brembo brakes, big wheels, side skirts, and a front end with big (likely fake) intakes. It will most likely translate to a Regal GS for our market, as is the case with the current OPC and GS. The new Regal/Insignia is expected to use the same platform as the new Buick LaCrosse, which is also shared by the Chevy Malibu and Impala. They should once again be available with front- or all-wheel drive and a choice of turbocharged four-cylinder engines. Rumor has the Opel versions debuting at the Geneva show March, and the Buick would likely follow, possibly in New York in April. View 13 Photos And then there's the wagon. All signs point to Buick finally bringing the most practical Insignia to our market as a Regal. We got wind of a focus group testing the idea, Buick has trademarked the name Regal Tour X. That version would likely go up against the Audi Allroad in the classy, slightly lifted all-wheel-drive wagon category, basically acting as an almost-crossover for people who want a wagon but won't admit it to themselves. The Insignia wagon caught here is also an OPC, and we think it looks even more handsome than the hatch-sedan shown above. The trim piece stretching from the base of the A-pillar all the way up and back down to the tail is a nice touch in profile view, although we're not so sure about how it terminates abruptly at the taillight.