1967 Buick Gs 400 on 2040-cars

Auto blog

GM announces six new recalls, covering 3.5 million vehicles

General Motors has just initiated another crushingly large recall, this time affecting some 3.36 million vehicles built between 2000 and 2014 and sold in the US, Canada and Mexico. Once again, the issue surrounds the cars' ignition switches, which can be kicked out of the run position if they're carrying extra weight or if they experience a "jarring" event. In this particular case, though, GM will modify the keys, rather than the ignition itself.
A four-by-six-millimeter hole will be drilled into the key, which will more safely accommodate the weight of the key ring. As is usually the case, the work will be done free of charge. The recalled vehicles include the 2000 to 2005 Cadillac Deville, 2004 to 2005 Buick Regal LS and GS, 2004 to 2011 Cadillac DTS, 2005 to 2009 Buick Lacrosse, 2006 to 2008 Chevrolet Monte Carlo, 2006 to 2011 Buick Lucerne and 2006 to 2014 Chevrolet Impala. Only the Impala is still in production, and even then, it's only sold to fleet companies.
According to an official statement from GM, there have been eight crashes and six injuries due to this latest issue. As if this isn't a dire enough blow for GM, the company has announced five smaller recalls, covering 165,000 vehicles.

The Chinese experiment | 2017 Buick Envision First Drive

The 2017 Buick Envision is a very good five-passenger crossover. The "but" you should anticipate will come in good time. First it's worth understanding why it exists at all. Out of the ashes of GM's bankruptcy a few flowers blossomed and the carmaker is doing exceptionally well, certainly far better than Chrysler has done in the wake of its free fall into Chapter 11. But of all the surprises at GM's turnaround, Buick surely ranks highest, without question the least likely player to thrive if you only study the North American market. Look farther than our shores, to China, however, and you won't be shocked. Note that the Envision, which has been on sale in China for a year and a half, will reach about 200,000 units this year; the entire Buick portfolio in the US only totaled 223,000 cars in 2015. Not only is China Buick's primary market, but what it makes there, like the Envision, is intended for a different sort of buyer. Here, we'd call it a compact crossover. In China the Envision is a relatively large car, and the buyer there is far more likely to use it as a tall limo, or at the very least, as a big-time status statement. That buyer is also very likely to be in his or her mid-30s – the average Buick buyer in the US is getting younger, but, at 58, is hardly a millennial. Still, Americans who buy the Envision will benefit from all of this China focus. Huge effort went into its development since the target competitor in China is the Audi Q5, according to Rick Spina, Executive Chief Engineer for the Envision. Spina explained that Buick went to the trouble and expense of isolating the entire chassis from engine, suspension, and driveline vibration and sound penetration. "If you look at non-luxury models like Ford Escape, Honda CR-V, nothing's isolated, everything is hard-bolted to the body, and so all that vibration goes into the frame." Spina says that even though you'd guess the China-built Envision shares the general parts bin of the Chevy Cruze and Equinox, it's almost entirely unique. "It's kind of an orphan," he says, because GM couldn't afford to invest in the ride tuning Buick had to have to compete with Audi in China for a volume Chevy product, so nothing from Chevy (for now) is on this platform. And although it would have made sense to have Cadillac or GMC share it, Cadillac's XT5 and GMC's Acadia were already on a different development cycle. Besides, he's pretty proud that the Envision was developed strictly for Buick.

GM cutting vehicle trim options to save money for electrification

Information continues to filter out about GM's plans based on comments the automaker made during its Capital Markets Day event in February. GM President Mark Reuss said the company's push to save money by rationalizing the number of build combinations will continue in 2020, carrying on the work done in 2019. As GM Authority covers, last year, the carmaker cut 3,500 components across model lines, a 12% drop in the number of parts it needed to stock in its plants. Reuss used the next-generation Chevolet Equinox and GMC Terrain as examples for more cost efficiencies, saying build possibilities — which include international markets and their options — will be cut by more than 50%, and use more shared parts. "We will reduce total trim levels on Equinox and Terrain from eight to six," Reuss said, "reduce engine variants from 11 to 5, reduce build combinations from more than 200 to less than 100 per program, and see significant cost savings of an already paid-for architecture that took the mass out, helping us self-fund electrification programs." GM will plow a large amount of the money it saves into its ambitious EV program. In 2017, the automaker said it intends to have 20 electric vehicles on the market by the end of 2023, some of which could be shared between brands. An automotive analyst at Seeking Alpha and a piece in Automobile attempted to put specifics to what we should expect. As Automobile points out, the first two EVs in the 20-car program are already on sale, being the Ariv Meld and Ariv Merge eBikes available in Belgium and The Netherlands. We've seen the Cruise Origin autonomous rideshare taxi, although we don't know when it will hit the road. The next three, which we should see in the metal shortly, are two Cadillac EVs and the GMC Hummer EV pickup. The Cadillac pair are expected to be sized like the XT4 and XT5, and along with the Hummer, should hit the market starting in late 2021.