1998 Buick Century Custom on 2040-cars

Auto blog

1987 Buick Grand National was made to be Kevin Hart's 'Dark Knight'

The Meguiar's booth at the SEMA show isn't the only place comedian and actor Kevin Hart is combining cars and cinema, his "Michael Myers" 1969 Plymouth Road Runner brooding in the car care products pen, while his SpeedKore "Hellraiser" 1970 Dodge Charger also menaces. Hart bought a 1987 Buick GNX last year and put it on Instagram with the caption, "Sundays are perfect for old school drives…. If you know you know." Looks like old G-Bodies are perfect for restomod builds, too, which we all already knew, but this car isn't the GNX that featured on social media. This is the 1987 Buick Grand National, one step below the GNX and half the price at the time. It's nicknamed "Dark Knight" and it's one of the stars of the Magnaflow exhaust booth at SEMA. Going back to work with regular collaborators Dave Salvaggio of Salvaggio Design and Sean Smith, of course there's a lot involved in the overhaul. Still, we appreciate how the team stayed true to the ethos of the Grand National in ways that made the build more complicated than it already was. Take the engine. The original came with a 3.8-liter V6 wearing a single turbocharger to register an official output of 245 horsepower and 355 pound-feet of torque compared to the GNX's 276 hp and 320 lb-ft. Instead of swapping it for a V8, it's been replaced with the 3.6-liter twin-turbo V6 from the Cadillac CT4-V Blackwing. And instead of leaving both turbos on, the engine junkies plumbed a single turbo in a layout recalling the 1987 engine even as it cleans up the original Chutes 'n' Ladders mess of tubes. We didn't get an output rating for the setup. The Cadillac's twin-turbo mill makes 472 hp and 445 lb-ft. in the CT4-V Blackwing. We would bet Dark Knight's engine's pretty close to that with the single large turbo at the prow, plenty of juice for a car weighing 3,545 pounds. Exterior upgrades include a custom front fascia with a carbon fiber hood and splitter. The interior shows the same tasteful restraint, polished design and nicer materials draped over the stock 1980s layout. That shifter controls GM's 8L90 eight-speed automatic instead of the original four-speed auto.  Elsewhere, Salvaggio did the same here as with the Michael Myers Road Runner, creating a custom frame to increase rigidity and get the car closer to the ground on its 19-inch HRE wheels in the Buick's original weave look.

2021 Buick Envision's bold design means small space gains, a few big losses

So far, every preview we've had of the 2021 Buick Envision compels us to believe that it isn't playing in the same league as the current Envision, nor is it playing the same sport. The chiseled, crisp exterior is matched by an interior that, in pictures at least, sends a genuine premium message. GM Authority got early intel on dimensions for the new crossover, the numbers showing that the only close relationship between the current and the new Envision is in size. According to GMA, the 2021 Buick will be 185.5 inches long on a wheelbase of 109.4 inches, it'll stand 74.1 inches wide without mirrors, and 64.6 inches tall. Front and rear tracks are matched at 63.3 inches. That makes the new version 1.8 inches longer than the current five-seater, with a wheelbase stretched 0.9 inches, while width is 1.7 inches wider but overall height is 2.2 inches lower. The track has been expanded by 1.3 inches front and back. The four-trim lineup will be base, Preferred, Essence and Avenir. Buick's website pegs the current Envision at the single curb weight of 3,755 pounds. GMA writes that the new car comes in at 3,685 pounds in base form, or 3,932 in top Avenir trim. Those could all represent weights for front-wheel-drive models. AWD will be optional on all but the base 2021 Envision. The price for edgier design is a tiny cut in interior room in front. In the coming crossover, front headroom shrinks 0.4 inches to 39.6 inches, front legroom shrinks by 0.5 inches, front shoulder room goes down by 0.3 inches. Front hip room gains 0.7 inches, however, Occupants in the row behind get a tiny bit more space in two dimensions, rear headroom going up 0.4 inches, rear legroom by 1.8 inches, Rear shoulder room gets shaved 0.7 inches, and those haunches on the 2021 model take a bite out of rear hip room, that spec dropping by 5.7 inches to 47.4.  Cargo room sees a slight dip, too, there being 25.2 cubic feet of space behind the second-row of seats compared to 26.9 feet available now. The gap grows with the rear seats down, the coming Envision able to swallow 52.7 cubic feet behind the front row, the current Envision managing 60 cubic feet.  When product starts showing up on dealer lots, we're to expect a 2.0-liter turbocharged four-cylinder under the hood with 230 horsepower and 258 pound-feet of torque, shifting through GM's nine-speed automatic transmission. GMA believes pricing will start around $34,000, which would be about $500 more than the current Envision.    

Kia Telluride vs Buick Enclave Luggage Test | What actually fits behind that third row?

So, you want to buy a three-row crossover. Before plunking down $40,000 on a new sport utility vehicle, might we dissuade you with the prospect of minivan ownership? The Pacifica Hybrid, perhaps ... no? Fine. Good thing crossovers (especially the Telluride and comparable Palisade) are so nice to drive these days. We’ll assume you want the big three-row crossover, as you intend to seat folks in all three rows. Unfortunately, raising that third row reduces the luggage area from cavernous to crawl space. ItÂ’s rather devastating from a pure numbers perspective to the two models we have today. The 2019 Buick Enclave goes from a monstrous 58 cubic-feet with the second-row in place down to 23.6 cubic-feet (which along with the nearly identical 2020 Chevrolet Traverse is still best-in-class). Meanwhile, the 2020 Kia Telluride takes a similar hit, going from 46 cubic-feet down to 21 cubic-feet. Just looking at the numbers, it would seem that the EnclaveÂ’s big advantage all but disappears with the third row up, boasting just 2.6 cubic-feet of storage more than the Telluride. But as West Coast Editor James Riswick has discovered in the numerous luggage tests he's conducted, the numbers don't always tell the whole story. Let's see how the Enclave and Telluride compare when you actually put things inside.  Boom. The Enclave swallows all of the test luggage we have for it without any fuss. The distance between the back of the seats to the hatch opening is enough to fit our full-size suitcase horizontally, making it easy to stack every other bag around it. It even fits below the seatbacks, so the driver will have an uninhibited view out the rear of the vehicle.  At our Michigan HQ, our test luggage consists of the following pieces: 28-inch upright suitcase, 24-inch upright suitcase, 19-inch upright suitcase, two small tote bags and one backpack. ItÂ’s likely enough luggage for a quick weekend getaway with the family, given there are no strollers involved. As we attempted to pack it all into the Telluride, weÂ’re glad we didnÂ’t have anything else. The loss of 2.6 cubic-feet of space was indeed felt much harder than what it looks like on paper. We knew we were in trouble when the 28-inch suitcase didnÂ’t fit along the floor as it did so neatly in the Enclave. We were forced to stack it up next to the rear seats, which left it sitting rather tall back there. As a result, the other suitcases didnÂ’t have a neat or convenient place to go.