2014 Buick Verano Convenience on 2040-cars

Auto blog

Junkyard Gem: 1978 Buick Skylark Sedan

Around the time that OPEC shut off the oil taps, The General realized that it was time to sell more small cars from GM divisions not previously known for such machines. The logical candidate for this project was the Chevrolet Nova, a rear-wheel-drive compact that shared much of its chassis design with the Chevrolet Camaro and Pontiac Firebird. The Nova-based Pontiac Ventura came out in the 1971 model year, and the Buick and Oldsmobile Divisions began producing their own badge-engineered Nova siblings for 1973 (Cadillac was late to the party, but eventually created the Nova-based Seville for 1976). At first, the Buickized Nova got Apollo badges, but the better-known Skylark name was applied to these cars for the 1975 through 1979 model years. Today's Junkyard Gem is one of those Nova-based Skylarks, found in a Denver self-serve yard. From the 1964 through 1972 model years, the Skylark lived on the A-Body chassis and was sibling to the Chevrolet Chevelle/Malibu, Pontiac LeMans/Tempest/GTO, and Oldsmobile Cutlass/442. After the 1975-1979 rear-wheel-drive X-Body phase, the Skylark name then went onto the unrelated front-wheel-dive X-Body chassis developed for the Chevrolet Citation. It's a Nova, sure, but Buick made sure that it had a bit more swank than its Chevy counterpart. Checked seat fabric with big square buttons! The base engine in the '78 Skylark was the 3.8-liter Buick V6, rated at 110 horsepower. GM had invested in a new crankshaft design for this engine the year before, so it no longer had the "odd-fire" cut-down V8 crankshaft that shook the fillings out of so many drivers' teeth in earlier years. An assortment of low-compression V8s from Oldsmobile, Chevrolet, Pontiac, and Buick were available as optional equipment as well, eventually leading to the "Chevymobile" lawsuits of a few years later. The base transmission in this car was a three-speed manual (I'm not sure if you could still get a three-on-the-tree column-shift manual Skylark in 1978, but a three-on-the-floor manual was available for sure). The very last three-on-the-tree car Americans could buy was the '79 Nova and its Olds Omega/Pontiac Phoenix siblings, while the final three-on-the-floor cars were the '81 Malibu and siblings. This car has the optional three-speed automatic.

2021 Buick Envision's bold design means small space gains, a few big losses

So far, every preview we've had of the 2021 Buick Envision compels us to believe that it isn't playing in the same league as the current Envision, nor is it playing the same sport. The chiseled, crisp exterior is matched by an interior that, in pictures at least, sends a genuine premium message. GM Authority got early intel on dimensions for the new crossover, the numbers showing that the only close relationship between the current and the new Envision is in size. According to GMA, the 2021 Buick will be 185.5 inches long on a wheelbase of 109.4 inches, it'll stand 74.1 inches wide without mirrors, and 64.6 inches tall. Front and rear tracks are matched at 63.3 inches. That makes the new version 1.8 inches longer than the current five-seater, with a wheelbase stretched 0.9 inches, while width is 1.7 inches wider but overall height is 2.2 inches lower. The track has been expanded by 1.3 inches front and back. The four-trim lineup will be base, Preferred, Essence and Avenir. Buick's website pegs the current Envision at the single curb weight of 3,755 pounds. GMA writes that the new car comes in at 3,685 pounds in base form, or 3,932 in top Avenir trim. Those could all represent weights for front-wheel-drive models. AWD will be optional on all but the base 2021 Envision. The price for edgier design is a tiny cut in interior room in front. In the coming crossover, front headroom shrinks 0.4 inches to 39.6 inches, front legroom shrinks by 0.5 inches, front shoulder room goes down by 0.3 inches. Front hip room gains 0.7 inches, however, Occupants in the row behind get a tiny bit more space in two dimensions, rear headroom going up 0.4 inches, rear legroom by 1.8 inches, Rear shoulder room gets shaved 0.7 inches, and those haunches on the 2021 model take a bite out of rear hip room, that spec dropping by 5.7 inches to 47.4.  Cargo room sees a slight dip, too, there being 25.2 cubic feet of space behind the second-row of seats compared to 26.9 feet available now. The gap grows with the rear seats down, the coming Envision able to swallow 52.7 cubic feet behind the front row, the current Envision managing 60 cubic feet.  When product starts showing up on dealer lots, we're to expect a 2.0-liter turbocharged four-cylinder under the hood with 230 horsepower and 258 pound-feet of torque, shifting through GM's nine-speed automatic transmission. GMA believes pricing will start around $34,000, which would be about $500 more than the current Envision.    

2017 Buick LaCrosse an evolution of sharp Avenir concept

After years as a bloated, uninspiring, but comfortable near-premium sedan, Buick has taken the wraps off a leaner, lither, far more stylish LaCrosse. The third-generation model has just made its debut at the 2015 Los Angeles Motor Show. While there's a lot to talk about, let's first address the new, Avenir-inspired sheetmetal. The fascia is basically the concept car smoothed over into production form, featuring the same winged trishield. In place of the chrome-trimmed waterfall, the LaCrosse gets a blacked-out, recessed grille with a chrome surround. It looks good in photos but it's better in person, adding a real sense of complexity and depth to the front end. The headlights and lower fascia, meanwhile, adhere closely to the concept. The same cannot be said of the LaCrosse's tail. While the taillight lighting pattern is similar, the overall shape of the lighting element is radically different, refining the design featured on the back of the Regal. Also gone, sadly, is the Avenir's boattail rear deck. Instead, the LaCrosse gets a small rear deck that curves up into a pleasant duckbill spoiler. The rest of the tail is pleasantly restrained. Perhaps the weakest point is the profile, where Buick has instituted a "split-spear" design, featuring a strong shoulder line above the rear wheel well, which sits below an even stronger character line that curves down and towards the front of the car. It strikes us as just a little too much, like the Impala. Underneath that sheetmetal, Buick has managed to trim nearly 300 pounds of body fat, nearly half of which came from the vehicle's actual structure. That 300 lbs, according to Buick's engineers, is equivalent to a Kenmore side-by-side refrigerator, in case you needed a helpful comparison. Despite the weight savings, Buick has upped the torsional rigidity for this new model by 15 percent. The LaCrosse's cabin features a strong, cockpit-like design, with a high, floating-bridge center console. This is possible due to Buick's adaption of the Electronic Precision Shift system, introduced earlier this month on the new Cadillac XT5. Despite the new-fangled console design, Buick's retained the wraparound cabin style introduced on the second-gen model. Based on a quick crawl around the interior, space is great in front, although ingress in back is somewhat difficult due to the roofline. You're probably wondering why we haven't said anything about the mechanicals just yet.