1972 Buick Skylark Custom 2 Dr Built 455 1971 Gsx Clone Loaded With Options on 2040-cars
Marseilles, Illinois, United States
Body Type:Coupe
Engine:7.5L 455Cu. In. V8 GAS Naturally Aspirated
Vehicle Title:Clear
Fuel Type:GAS
For Sale By:Private Seller
Number of Cylinders: 8
Make: Buick
Model: Skylark
Trim: Custom Coupe 2-Door
Warranty: Vehicle does NOT have an existing warranty
Drive Type: U/K
Options: Cassette Player
Mileage: 67,428
Power Options: Air Conditioning, Power Locks, Power Windows, Power Seats
Sub Model: GSX CLONE
Exterior Color: STRATOMIST BLUE
Interior Color: Black
THIS IS A 1972 BUICK SKYLARK MADE TO LOOK LIKE A 1971 455 GSX CLONE (I HAVE OWNED THIS CAR SINCE 1995)
THE CAR IS LOADED WITH POWER OPTIONS IT HAS POWER WINDOWS, POWER LOCKS, POWER SEAT, POWER TRUNK, TILT, AC, BUCKETS AND CONSOLE, HOOD TACH, DISC BRAKES, 3:42 POSI REAR END
IT IS STRATOMIST BLUE (CAR WAS PAINED IN 2000) WITH GSX STRIPES AND HOOD TACH ADDED. HAS A FEW SMALL CHIPS AND A COUPLE SMALL BUBBLES ON THE DRIVERS QUARTER ONLY THEY ARE UNDER THE PAINT. I PUT NOS FENDERS ON THE CAR, THE DOORS AND TRUNK WERE SOLID I DID PUT A HALF QUARTER ON THE DRIVERS SIDE IT WAS DENTED BAD BEHIND THE WHEEL AND FULL QUARTERS WERE NOT AVAILABLE THEN. I PUT THE 1971 BUMPERS, HEADLIGHT BEZELS, AND GRILLE IN.
THE MOTOR IS A 1975 NOS SHORT BLOCK BORED .30 OVER WITH 10.5 TO 1 FORGED PISTONS. IT HAS 1971 HEADS AND EDLEBROCK B4B INTAKE MANIFOLD, REBUILT CARB, NEW HEI DISTRIBUTOR AND WIRES. IT HAS 1967 EXHAUST MANIFOLDS THAT WERE PORTED OUT AND MANDRELL BENT 2 1/2" ALUMINIZED EXHAUST. TURBO 400 TRANS WAS REBUILT WITH NEW CONVERTOR. REAR END IS A REBUILT 3:42 POSI WITH NEW EATON POSI. IT HAS A GRAND NATIONAL STEERING BOX AND BIG FRONT SWAY BAR. IT HAS BOXED LOWER AND UPPER CONTROL ARMS AND REAR SWAY BAR. FRONT SUSPENSION AND DISC BRAKES WERE ALL REPLACED. LARGER ALTERNATOR AND NEW BATTERY WERE ADDED.
INTERIOR WAS REDONE WITH NEW HEADLINER, CARPET, PACKAGE TRAY, FRONT AND REAR DOOR PANELS, ARM RESTS AND BACKING PLATES, FRONT BUCKET SEATS WERE REBUILT AND NEW COVERS ADDED. DASH WAS RECHROMED AND NEW WOOD GRAIN ADDED. AUTOMETER TACH AND OIL AND WATER GAUGES.
OVERALL CAR WAS REBUILT IN 2000 WITH NEW WEATHERSTRIPPING, WINDSHIELD, WIRING HARNESSES, FUEL SENDING UNIT AND LARGER FUEL LINES, RECHROMED BUMPERS, AC PARTS WERE REPLACED, EVAPERATOR CORE, DRYER, COMPRESSOR. IT HAS ABOUT 4500 MILES ON REBUILD BUT THE MOTOR AND TRANS WERE JUST PUT IN AND ONLY HAVE ABOUT 200 MILES ON THEM. IF YOU WANT TO SEE THE CAR OR HAVE QUESTIONS PLEASE CALL STEVE (708) 516-6062.
I AM ASKING $20,000 FOR THE CAR YOU CAN GET IN IT AND DRIVE ANYWHERE IN BUICK COMFORT. $500 DEPOSIT WITHIN 48 HOURS OF PURCHASE. MUST PICK UP WITHIN 7 DAYS UNLESS YOU MAKE ARANGEMENTS.
Buick Skylark for Sale
Auto Services in Illinois
Wickstrom Chrysler Jeep Dodge ★★★★★
White Eagle Auto Body Shop ★★★★★
Walter`s Foreign Car Serv ★★★★★
Tyson Motor Corp ★★★★★
Triple X Transport Refrigeration & Trailer Repair ★★★★★
Total Car Total Care Inc ★★★★★
Auto blog
Opel Insignia OPC Sports Tourer shows its fresh face ahead of Frankfurt debut
Thu, 22 Aug 2013Drive down the Autobahn and there's any number of vehicles likely to pass you, and most of them are produced locally. But if you're wondering how that Opel left you in its dust, look closely (and quickly) enough and you might make out the letters OPC on the back.
They stand for Opel Performance Center (the German counterpart to Vauxhall's VXR line) and they adorn performance versions of the Corsa, Astra and Insignia. The latter is undergoing a bit of a refresh and is expected to debut at the Frankfurt Motor Show in a couple of weeks, but you don't have to wait that long as our intrepid spy photographers have caught it in the flesh outside an Opel facility in Germany.
Spied here completely undisguised in Sports Tourer (read: wagon) form, the Insignia has had a few nips and tucks performed, but we'll be more intrigued to see what it's got under the hood. The current model packs a 2.8-liter twin-turbo V6 driving 325 horsepower to all four wheels, but rumors suggest that the OPC (yeah you know me!) could have as much as 400 hp up its sleeve. That would make this one heck of a sleeper - especially in wagon form - and only make us pine for a more potent version of its twin Buick Regal to roam our highways, too.
eBay Find Of The Day: 1946 Tucker Torpedo Prototype II hides a secret Riviera
Thu, 10 Jul 2014The Tucker Torpedo is one of the great what-if stories of automotive history. Preston Tucker hoped to revolutionize the industry with a car unlike any other on the road at the time. However, due to a variety of problems, he only managed build 51 vehicles before closing shop. Over time, they have become highly sought-after; In 2012, one sold for $2.65 million at auction.
That brings us to this Tucker "replica" that you see above because it might be one of the ugliest monstrosities ever put together. However, we might extend some leniency to the creator, as the vehicle isn't actually trying to replicate the classic look of the 1948 Tucker Torpedo. Instead, it is attempting to reproduce an earlier prototype from 1946 that actually features that weird, trident nose. According to the seller, his uncle built the car as a labor of love and supposedly used actual plans from Tucker as inspiration.
Underneath all of the crazy changes is a 1971 Buick Riviera powered by a 455-cubic-inch (7.5-liter) Buick V8. Some of the replica's odder modifications include the front fenders that turn with the wheels and the fin running down the back. All three headlights work, but the one in the middle is only for the high beams. Oddly, the small hinged sections on the roof are meant to open to avoid hitting your head when getting in or out. Maybe the seller's uncle was a very tall guy?
Buick could import Envision crossover from China
Fri, Nov 13 2015Reports about the Buick Envision's likely arrival in the US go back even before the midsize crossover's debut in China last year, but the brand still doesn't have a official decision about whether to bring it here. According to The Detroit News, the company is somewhat concerned about a poor consumer reaction to launching a Chinese-made model in this country. Even if Buick officials are slightly apprehensive about the public perception, the concerns might not hold back the Envision in US. An anonymous source also tells The Detroit News that the brand intends to launch the CUV early next year and wants to sell around 40,000 of them annually. However, the UAW is reportedly not happy about the possibility of a Chinese-produced model coming here. The Envision launched at the Chengdu Motor Show as a step between the compact Encore and three-row Enclave. Power comes from a 2.0-liter turbocharged four-cylinder with stop/start and 256 horsepower and 260 pound-feet of torque. Buick offers the CUV with a six-speed automatic and all-wheel drive. The interior features active noise cancellation and an eight-inch infotainment system. The Envision also seems like a natural fit for Buick in the US due to the obvious hole in its CUV lineup, and the abundant rumors suggest that the brand sees the possibilities for it. The company now needs to decide whether to take a chance here and offer a vehicle from China.