Find or Sell Used Cars, Trucks, and SUVs in USA

1972 Buick Skylark on 2040-cars

Year:1972 Mileage:94000
Location:

Millstadt, Illinois, United States

Millstadt, Illinois, United States
Advertising:
Vehicle Title:Clear
Engine:350
Year: 1972
Drive Type: automatic
Model: Skylark
Mileage: 94,000
Trim: skylark
Condition: Used: A vehicle is considered used if it has been registered and issued a title. Used vehicles have had at least one previous owner. The condition of the exterior, interior and engine can vary depending on the vehicle's history. See the seller's listing for full details and description of any imperfections. ... 

This 1972 Buick Skylark is an awesome car that rides smooth and starts right up. This would make for a great fixer-upper while being a daily driver at the same time. It has a few dents an dings, as would any car from the era, but is primed and almost ready to paint. The car is in good mechanical condition, and ready to drive! Took a 50 mile drive a few days ago and had no issues. As of the floors there are two holes one on the drivers side and one on the passenger side(pictured). Also it has holes one on each side of the trunk pan all the way down by the rear wheels. There is also a hole on the drivers side up inner wheel well by the head lights. The rear rims are good but the front rims wheels the center caps go are broken. It needs a new front grill, the hood is dented, and the front bumper is bent up but may still be fixable. The engine is a 350 and has just been rebuilt with only about 150 miles on the rebuild, it also has a fresh tune up. It also has a newer radiator in it, has heat and a/c, air goes through but not sure if they work. I would drive this car anywhere, all of the light are in working order, however non of the gauges work with the exception of the fuel gauge. Overall the car is in great shape for the price, and will make a great daily driver and or fixer-upper. I have a clean and clear title please message, call, or text 618-719-5269  with any questions at any time.

Auto Services in Illinois

West Side Motors ★★★★★

Used Car Dealers
Address: 206 N Chicago St, Donovan
Phone: (815) 432-0809

Turi`s Auto Collision Center ★★★★★

Automobile Body Repairing & Painting
Address: 25 W North Ave # A, Oak-Brook
Phone: (630) 629-6244

Transmissions R US ★★★★★

Auto Repair & Service, Automobile Parts & Supplies, Auto Transmission
Address: 1609 Lafayette Ave, Dennison
Phone: (812) 466-3082

The Autobarn Nissan ★★★★★

New Car Dealers, Used Car Dealers
Address: 1012 Chicago Ave, Kenilworth
Phone: (847) 475-8200

Tech Auto Svc ★★★★★

Auto Repair & Service
Address: 660 Ogden Ave, Wayne
Phone: (630) 968-6889

T Boe Inc ★★★★★

Auto Repair & Service, Tire Dealers, Brake Repair
Address: Granville
Phone: (815) 246-8109

Auto blog

New Buick Envision model spotted in China, expected here this year

Tue, Mar 17 2020

At GM Capital Markets Day in February, GM North America president Barry Engle said the U.S. market can expect "updated models of Chevrolet Equinox and Traverse, Buick Envision and Enclave, as well as GMC Terrain." We've seen the Equinox and Traverse, and although we weren't aware, we've seen the Envision. Buick showed an EV crossover concept in 2018 called the Enspire, and it was thought to preview an eventual production model called the Enspire that's been spotted in various places testing under heavy camouflage in the U.S. GM, in fact, applied to trademark the Enspire name twice in the U.S. The model's final production form got an early reveal in China thanks to the Ministry of Industry and Information Technology, and according to GM Authority, a branding redirection has led to the crossover being called the Envision. Assuming this is the model that comes to the U.S., it will share dealer space with the current Envision imported from China. Motor1 writes that Chinese site Auto Home alleges the name Envision S will distinguish the new product, and the tailgate in the low-res photo plausibly shows an S after the model name. That doesn't mean it would get the S suffix here, though. It's not clear if the coming crossover grows in size compared to the standard Envision the way the Encore GX expanded a touch over the Encore. The marquee difference will be that the new Envision is more luxurious in looks, equipment, and features. There are few details, but it's thought the Envision S sits on the same E2 platform as the Cadillac XT4, and will use the same 2.0-liter turbocharged four-cylinder in the Cadillac paired with the automaker's nine-speed automatic. In the XT4, that mill produces 237 horsepower and 258 pound-feet of torque, but across all its applications in the GM stable it makes anywhere from 230 to 237 hp.    What we can see is that the new CUV takes the Envision name in a more dynamic direction, starting with a trim upper front fascia that puts narrow headlights astride a wide grille clearly derived from the concept, the lower front fascia with chrome-lined outer intakes that recall the Aston Martin DBX. A diffuser-looking silver trim piece in front is mirrored in back. A sloping roof helps create the slim profile, leading to a trim backlight, thin taillights, and strong horizontals on the bumper that emphasize width.

Buick struggling to keep up with Encore demand

Tue, 06 Aug 2013

Buick is having a hard time keeping up with demand for its all-new Encore mini-CUV, according to a report from Automotive News. The stylish, lifted five-door went on sale in January, but dealers have reported that supplies have dwindled after the initial high demand, taking the proverbial "wind out of the sails."
General Motors admits that it underestimated demand for the diminutive Buick, which is built in Korea and sold as the Opel Mokka in Europe, where it's also seen success. Buick spokesperson Nick Richards told AN, "We increased production, so there have been a lot more landing within the last month."
Buick has done a booming business, though, even with its limited supply of Encores. With over 12,000 units sold in the first half of 2013, the small CUV is on pace to annihilate industry analysts' estimates, which predicted no more than 18,500 units in 2013. We're not entirely surprised. When we first drove the Encore late last year, Autoblog professed that we had no idea how sales would turn out, as the Encore wasn't really entering into an established segment. Even so, wefound a surprising amount to like in the Encore, enough that we "wouldn't bet against it" being a major success.

Weekly Recap: Ford GT inspires guitar, foosball table, sailboat

Sat, Apr 18 2015

Ford design vice president Moray Callum had just wrapped up a briefing on the interior of the Ford GT last month, but something seemed out of place. He grinned and pointed behind him, "You might be wondering why I have a boat behind me," he said mischievously. It was there because Ford set its designers on a mission to stretch and showcase their talents: design non-automotive objects inspired by the interior of the GT supercar. Callum received quite a response, too. His team produced a guitar, a foosball table (yeah bro!), a racing sailboat, a Wi-Fi speaker and some furniture. As the veteran design chief explained, "It's a really great exercise both to highlight our designers' talents, but also to really see how our design philosophy can work and how you can use it and get a common response back from a worldwide design team." Guitar View 25 Photos The objects have been on display this week at the Salone del Mobile furniture and fashion design fair in Milan, Italy, where Ford has had a presence for three years. There's also a light exhibition that apparently was inspired by the GT, as well. While this might seem a little far-fetched for the automaker, Ford said exhibitions like the Salone del Mobile give its designers another way to be creative and ultimately produce striking interior style. Ford wants this to be a differentiator, as research shows consumers are placing emphasis on the layout and features inside when they're making a decision about buying a new car. It's a little light hearted – but it's also potentially big business. Other News & Notes Cadillac CT6 platform could be used for Buick General Motors product chief Mark Reuss said the Cadillac CT6 platform could be used for a large Buick, though "not yet," Automotive News reported. The underpinnings can accommodate rear-wheel or all-wheel drive and would give Buick the large flagship it lacks. The report jibes with comments Reuss made at a roundtable with Autoblog and other reporters at the New York Auto Show. When asked if Buick had space for a large car on the CT6 chassis, he replied, "Yeah, I think it does. Yeah, I think we do." Buick has revamped its lineup in recent years with attractive crossovers and small and midsize sedans, but hasn't added the proverbial flagship that's yearned for by enthusiasts. Buick surprised industry observers with the stylish Avenir concept at the Detroit Auto Show earlier this year that raised the possibility of a halo sedan.