1965 Buick Skylark on 2040-cars

Auto blog

GM SUV window switch recall urges owners to park vehicles outside

It's not unusual for there to be a lag between an automaker announcing a recall and the official documentation showing up on the National Highway Traffic Safety Administration website. So it's no surprise that a recent GM campaign took about a month to appear in its official capacity. However, there appears to be some big differences between the two reports with potential safety implications.
In late June, GM announced that it needed to recall 181,984 examples of the Chevrolet Trailblazer, Buick Rainier, GMC Envoy, Isuzu Ascender and Saab 9-7x from the 2005-2007 model years, plus the 2006 Chevy Trailblazer EXT and 2006 GMC Envoy XL. The new documents paint a slightly different picture with 184,611 needing repaired and different model years listed.
The reason for the fix is still the same, though. It's possible for fluid to contact the master power window switch module in the driver's door, which can corrode the part. Eventually this could cause a short circuit, leaving the buttons inoperable and potentially leading to a fire. But the new NHTSA documents add an important note: "A fire could occur even while the vehicle is not in use. As a precaution, owners are advised to park outside until the remedy has been made."

The Chinese experiment | 2017 Buick Envision First Drive

The 2017 Buick Envision is a very good five-passenger crossover. The "but" you should anticipate will come in good time. First it's worth understanding why it exists at all. Out of the ashes of GM's bankruptcy a few flowers blossomed and the carmaker is doing exceptionally well, certainly far better than Chrysler has done in the wake of its free fall into Chapter 11. But of all the surprises at GM's turnaround, Buick surely ranks highest, without question the least likely player to thrive if you only study the North American market. Look farther than our shores, to China, however, and you won't be shocked. Note that the Envision, which has been on sale in China for a year and a half, will reach about 200,000 units this year; the entire Buick portfolio in the US only totaled 223,000 cars in 2015. Not only is China Buick's primary market, but what it makes there, like the Envision, is intended for a different sort of buyer. Here, we'd call it a compact crossover. In China the Envision is a relatively large car, and the buyer there is far more likely to use it as a tall limo, or at the very least, as a big-time status statement. That buyer is also very likely to be in his or her mid-30s – the average Buick buyer in the US is getting younger, but, at 58, is hardly a millennial. Still, Americans who buy the Envision will benefit from all of this China focus. Huge effort went into its development since the target competitor in China is the Audi Q5, according to Rick Spina, Executive Chief Engineer for the Envision. Spina explained that Buick went to the trouble and expense of isolating the entire chassis from engine, suspension, and driveline vibration and sound penetration. "If you look at non-luxury models like Ford Escape, Honda CR-V, nothing's isolated, everything is hard-bolted to the body, and so all that vibration goes into the frame." Spina says that even though you'd guess the China-built Envision shares the general parts bin of the Chevy Cruze and Equinox, it's almost entirely unique. "It's kind of an orphan," he says, because GM couldn't afford to invest in the ride tuning Buick had to have to compete with Audi in China for a volume Chevy product, so nothing from Chevy (for now) is on this platform. And although it would have made sense to have Cadillac or GMC share it, Cadillac's XT5 and GMC's Acadia were already on a different development cycle. Besides, he's pretty proud that the Envision was developed strictly for Buick.

Buick Enspire spied for the first time, loses concept's electric powertrain

About a year ago, Buick showed a high-performance electric crossover with wide, aggressive, curvy lines that was called the Buick Enspire. Now we have our first look at the production version. While it does seem to be styled like the crossover, it also seems to have lost its electric powertrain in favor of internal combustion. At the front of the crossover, we can clearly see it has the skinny, scowling headlights of the concept sitting high on the front fascia and flush with the hood. The main grille looks like it may be smaller, but it could also just be that the actual open section of the grille doesn't fill up the grille area of the fascia. In profile, the crossover has an attractive long nose, low roof and rising belt line. The rear shows the most change, as the rear pillars are much thicker, and the taillights don't appear to span the full width of the crossover. It's in the rear that we can also see the evidence that the Buick Enspire will actually be gasoline powered. Looking very closely under the rear bumper cover, we can see two exhaust tips turned to face the ground. Based on the size of the crossover, and the fact a Cadillac XT4 was being driven along with the prototype, the Enspire is probably using the XT4's platform, as well as its mechanical bits. That means it probably has a turbocharged 2.0-liter four-cylinder making 237 horsepower and 258 pound-feet of torque. Power will also probably go through a nine-speed automatic to either the front wheels or all four. This prototype looks to be pretty far along, so we'll probably see the production version in about a year. Considering the Enspire's size and likely powertrain, it may even replace the similar Buick Envision. And since the Envision is Buick's worst selling crossover (unless you count the Regal TourX as one), it would be ripe for replacement.