1953 Buick Skylark on 2040-cars

Auto blog

Little-bit-bigger 2020 Buick Encore GX gets two three-cylinder engines

Ford broke the ice on selling three-cylinder engines in the U.S. with the 2014 Fiesta, then followed up with the EcoSport. Buick is about to widen that supermini-sized crack in the ice with the 2020 Encore GX. The semi-subcompact crossover will come in three trim levels that mix-and-match two turbocharged three-cylinder engines, two transmissions, and two drivetrains. The smaller engine is a 1.2-liter three-pot with 137 horsepower and 166 pound-feet of torque. This comes in one horse and 18 lb-ft of twist beyond the 1.4-liter four-cylinder in the smaller Encore. This engine will only be paired with a CVT and front-wheel drive in the Preferred, Select, and Essence trims. The meatier motor is a 1.3-liter three-cylinder with 155 hp and 174 lb-ft. That's down on the 163 hp and 177 lb-ft that the same engine produces in the Chinese-market version of the Encore GX. However, it gets buyers close to the 1.4-liter turbocharged four-cylinder that used to be optional on the smaller Encore, producing 153 hp and 177 lb-ft. This engine can be optioned on the front-wheel drive Select and Essence trims, where it would be mated to the CVT. The 1.3-liter three-cylinder is standard on all trims optioned with all-wheel drive, where it gets paired with GM's nine-speed automatic. GM does say the horsepower figures are estimates at the moment, so don't be surprised at any slight changes before deliveries begin next year. The Encore GX will serve buyers who would love it if the Encore had a bit more room but don't want to step up to the Envision. For a price GM hasn't announced yet, the Encore GX will reward those buyers with five more feet of cargo space, and some extra power for all those who decide to level up further. The junior Encore weighs just over 3,200 pounds, it's likely the Encore GX will shade that some. The Encore GX does ride on GM's new VSS-F platform, though, so the advanced architecture could provide an overall superior experience even with the lesser three-cylinder. GM has also said that the Encore GX will come standard with safety kit like forward collision alert and lane keep assist with a lane departure warning, features that are cost extras on the Encore. The Encore GX will also include automatic emergency braking, which can't be had on the Encore at any price.

We really want to use an eCrate to restomod an old GM car. Here's what we'd build

You hopefully saw the news today of GM's introduction of its Connect and Cruise eCrate motor and battery package, which effectively makes the Bolt's electric motor, battery pack and myriad other elements available to, ah, bolt into a different vehicle. It's the same concept as installing a gasoline-powered crate motor into a classic car, but with electricity and stuff.  This, of course, got us thinking about what we'd stuff the eCrate into. Before we got too ahead of ourselves, however, we discovered that the eCrate battery pack is literally the Bolt EV pack in not only capacity but size and shape. In other words, you need to have enough space in the vehicle to place and/or stuff roughly 60% of a Chevy Bolt's length. It's not a big car, but that's still an awful lot of real estate. There's a reason GM chose to simply plop the pack into the bed and cargo area of old full-size SUVs. Well that, and having a rear suspension beefy enough to handle about 1,000 pounds of batteries.  So after that buzz kill, we still wanted to peruse the GM back catalog for classics we'd love to see transformed into an electric restomod that might be able to swallow all that battery ... maybe ... possibly ... whatever, saws and blow torches exist for a reason.  1971 Buick Riviera Consumer Editor Jeremy Korzeniewski: If you’re going to build an electric conversion, why not do it with style? ThatÂ’s why IÂ’m choosing a 1971-1973 Buick Riviera. You know, the one with the big glass boat-tail rear end that ends in a pointy V. Being a rather large vehicle with a big sloping fastback shape, IÂ’m hoping thereÂ’s enough room in the trunk and back seat to pack in the requisite battery pack. That would likely require cutting away some of the metal bulkhead that supports the rear seatback, but not so much that a wee bit of structural bracing couldnÂ’t shore things up. The big 455-cubic-inch Buick V8 up front will obviously have to go. Remember, this was the 1970s, so despite all that displacement, the Riviera only had around 250 horsepower (depending on the year and the trim level). So the electric motorÂ’s 200 horsepower and 266 pound-feet of torque ought to work as an acceptable replacement.   1982 Chevrolet S10 Associate Editor Byron Hurd: OK, so the name "E-10" is already taken by a completely different truck, but let's not let labels get in the way of a fun idea.

2016 Buick Cascada marks the return of casual convertibles

Buick is reentering the convertible game after a 25-year absence with this, the long-awaited 2016 Cascada. Fans of General Motors' European operations will recognize this svelte, four-place droptop as a rebadged version of the critically well-received Vauxhall/Opel Cascada, a model that has been on sale to audiences across The Pond since 2013. The Cascada will once again give American car buyers the chance to buy a relaxed, affordable two-row convertible without sporting pretensions, an option that arguably hasn't been available since the demise of the Chrysler 200 droptop. For US duty, the softtop Cascada will arrive with a 1.6-liter, direct-injected, turbocharged four-cylinder that churns out 200 horsepower. That figure is paired up with 206 pound-feet of torque, which can be bumped to 221 lb-ft via an overboost function. A six-speed automatic will dispatch that power to the front wheels, which are managed courtesy of a HiPer strut front-suspension system. While the Cascada might share its front suspension with the setup found on the Regal, its torsion-beam rear suspension has more in common with the Vauxhall/Opel Astra (and Buick Verano) on which it's based. 20-inch wheels and an electric power-assisted steering system round out the convertible's handling hardware. Of course, we doubt most Cascada customers will care about such oily and unseen things. Instead, they'll be more focused on the droptop's sheetmetal, which, considering it's basically a convertible version of the extremely handsome Astra, should win the car at least a few fans. While we only have so much detail to work with in the images that have been released so far – we'll be seeing the Cascada firsthand this evening (Sunday), so check back tonight for additional live images later today. Naturally, the Vauxhall/Opel grille will be replaced by Buick's trademark waterfall grille, although the company's other big styling calling card, portholes, are absent from our current pair of shots. A wide chrome strip stands out on the rear, tying the taillights together and increasing the Cascada's resemblance to the Regal sedan. A single oval exhaust tip juts out from the driver's side rear bumper. In terms of its actual dimensions, the Cascada's wheelbase is less than half an inch longer than the Verano, while the droptop is an inch longer than its four-door counterpart overall. At only an inch wider, meanwhile, the Cascada will enjoy the same easy to manage footprint as Buick's entry-level sedan.