1980 Buick Regal Base Coupe 2-door 3.8l on 2040-cars

Auto blog

2020 Buick Encore drops more powerful 1.4-liter four-cylinder option

It's not just Chevrolet Equinox, Terrain and Traverse crossovers and Cadillac CT6 enjoying the engine and trim switcheroos this spring. Based on the order guide, CarsDirect reports that the Buick Encore, Buick's most popular model by far, will lose one of its two engines. The 2019 Encore offers a 1.4-liter four-cylinder in two guises: one with 138 horsepower and 148 pound-feet of torque, the other with 153 hp and 177 lb-ft and stop/start. The more powerful version will not be an option on the 2020 Encore. The upgraded motor is a $250 option, but only after spending an additional $2,600 to move up to the Sport Touring trim, or shelling out $6,100 to reach the Essence trim. Aggressive deals could make the higher trims more economical, though; at the time of writing, the Sport Touring Encore includes $3,250 cash allowance, making it $650 less expensive than the base Encore 1SV. The more powerful 1.4-liter engine also delivered better gas mileage, with buyers getting one more mile per gallon in combined driving. Even so, buyers didn't dig it. In comments to CarsDirect, a Buick spokesperson said those purchasing 2019 Encores have only chosen the burlier motor 12 percent of the time. The weak take-rate could end up doing Buick an easy favor. The Buick Encore GX is expected to make landfall on U.S. shores sometime this year, riding on a different platform than our present Encore, and bringing a longer wheelbase with it. It will slide into the lineup between the $23,200 Encore and $31,995 Envision. This is all hypothetical at the moment, of course, but that seems a perfect place to insert the 153-hp 1.4-liter as an exclusive standard feature.

The new Opel Insignia might be a great Buick, but it's a sad Holden Commodore

Since the first shots of the uncovered Opel Insignia hit our inboxes, we've been filled with excitement for the new sedan. It looks great, it should come to America with little to no visual changes as the Buick Regal, and we might even get a wagon version. Unfortunately, there's a lead lining to this silver cloud, and it comes to us from Down Under. You see, the Opel Insignia is also undergoing a re-badging job in Australia to become the new Holden Commodore. It's replacing the beloved rear-drive Commodore (with an optional V8 and ultra-high performance HSV variants) with a front-drive-based platform offering four- or six-cylinder engines. This is depressing news considering the Zeta-platform underpinning the Commodore VF spawned the Pontiac G8, Chevrolet SS, and fifth-generation Camaro. Knowing this was going to happen doesn't help much either. What makes it all worse is that the new Commodore doesn't have a shred of unique styling in the bodywork. That's not an exaggeration. A new grille with a Holden lion badge instead of an Opel lightning bolt badge is the only change. See for yourself in the Insignia gallery below. Not only did GM erase a unique Australian model, it didn't even allow the brand to give the car a distinct shape. It's sort of like when Ford planned to replace the Mustang with the Mazda-derived Probe. The Probe wasn't that bad for the time, but it was no Mustang. At least in that case the Mustang survived. View 12 Photos Before we get ourselves too down, we should mention that there are reasons to be hopeful for the future. For one thing, the new all-wheel-drive Commodore/Insignias will come with a version of the GKN-developed rear differential found in the Focus RS and Range Rover Evoque, which is pretty neat on its own. And Opel/Vauxhall have always had wild performance versions of the Insignia and its Vectra predecessor. The last one made 325-horsepower and had all-wheel-drive. A new one would likely produce much more, since one of the available V6s makes 308 horsepower. Then imagine all of that extra hypothetical horsepower hooked up to the all-wheel-drive system that introduced us to "drift mode." Not only that, but rear-drive Holdens may not be completely dead yet. A Belgian man announced his intention to buy an old Holden factory along with the tooling and rights for the car once it was discontinued. His plan is to continue producing the old model after Holden is done with it.

We really want to use an eCrate to restomod an old GM car. Here's what we'd build

You hopefully saw the news today of GM's introduction of its Connect and Cruise eCrate motor and battery package, which effectively makes the Bolt's electric motor, battery pack and myriad other elements available to, ah, bolt into a different vehicle. It's the same concept as installing a gasoline-powered crate motor into a classic car, but with electricity and stuff.  This, of course, got us thinking about what we'd stuff the eCrate into. Before we got too ahead of ourselves, however, we discovered that the eCrate battery pack is literally the Bolt EV pack in not only capacity but size and shape. In other words, you need to have enough space in the vehicle to place and/or stuff roughly 60% of a Chevy Bolt's length. It's not a big car, but that's still an awful lot of real estate. There's a reason GM chose to simply plop the pack into the bed and cargo area of old full-size SUVs. Well that, and having a rear suspension beefy enough to handle about 1,000 pounds of batteries.  So after that buzz kill, we still wanted to peruse the GM back catalog for classics we'd love to see transformed into an electric restomod that might be able to swallow all that battery ... maybe ... possibly ... whatever, saws and blow torches exist for a reason.  1971 Buick Riviera Consumer Editor Jeremy Korzeniewski: If you’re going to build an electric conversion, why not do it with style? ThatÂ’s why IÂ’m choosing a 1971-1973 Buick Riviera. You know, the one with the big glass boat-tail rear end that ends in a pointy V. Being a rather large vehicle with a big sloping fastback shape, IÂ’m hoping thereÂ’s enough room in the trunk and back seat to pack in the requisite battery pack. That would likely require cutting away some of the metal bulkhead that supports the rear seatback, but not so much that a wee bit of structural bracing couldnÂ’t shore things up. The big 455-cubic-inch Buick V8 up front will obviously have to go. Remember, this was the 1970s, so despite all that displacement, the Riviera only had around 250 horsepower (depending on the year and the trim level). So the electric motorÂ’s 200 horsepower and 266 pound-feet of torque ought to work as an acceptable replacement.   1982 Chevrolet S10 Associate Editor Byron Hurd: OK, so the name "E-10" is already taken by a completely different truck, but let's not let labels get in the way of a fun idea.