2010 Buick Lucerne Cxl Premium on 2040-cars

Auto blog

Little-bit-bigger 2020 Buick Encore GX gets two three-cylinder engines

Ford broke the ice on selling three-cylinder engines in the U.S. with the 2014 Fiesta, then followed up with the EcoSport. Buick is about to widen that supermini-sized crack in the ice with the 2020 Encore GX. The semi-subcompact crossover will come in three trim levels that mix-and-match two turbocharged three-cylinder engines, two transmissions, and two drivetrains. The smaller engine is a 1.2-liter three-pot with 137 horsepower and 166 pound-feet of torque. This comes in one horse and 18 lb-ft of twist beyond the 1.4-liter four-cylinder in the smaller Encore. This engine will only be paired with a CVT and front-wheel drive in the Preferred, Select, and Essence trims. The meatier motor is a 1.3-liter three-cylinder with 155 hp and 174 lb-ft. That's down on the 163 hp and 177 lb-ft that the same engine produces in the Chinese-market version of the Encore GX. However, it gets buyers close to the 1.4-liter turbocharged four-cylinder that used to be optional on the smaller Encore, producing 153 hp and 177 lb-ft. This engine can be optioned on the front-wheel drive Select and Essence trims, where it would be mated to the CVT. The 1.3-liter three-cylinder is standard on all trims optioned with all-wheel drive, where it gets paired with GM's nine-speed automatic. GM does say the horsepower figures are estimates at the moment, so don't be surprised at any slight changes before deliveries begin next year. The Encore GX will serve buyers who would love it if the Encore had a bit more room but don't want to step up to the Envision. For a price GM hasn't announced yet, the Encore GX will reward those buyers with five more feet of cargo space, and some extra power for all those who decide to level up further. The junior Encore weighs just over 3,200 pounds, it's likely the Encore GX will shade that some. The Encore GX does ride on GM's new VSS-F platform, though, so the advanced architecture could provide an overall superior experience even with the lesser three-cylinder. GM has also said that the Encore GX will come standard with safety kit like forward collision alert and lane keep assist with a lane departure warning, features that are cost extras on the Encore. The Encore GX will also include automatic emergency braking, which can't be had on the Encore at any price.

Buick Riviera Concept hits the floor in Shanghai

Here we have a concept in the true sense of the term. The Buick Riviera you see here - the name of which was last used in production back in 1999 - is said to preview Buick's future styling direction, which means we should expect to see more flowing body shapes to go along with new versions of the marque's classic waterfall grille design. Oh, and we don't believe there's a single porthole in sight.
Powered by Buick's so-called dual-mode wireless plug-in hybrid electric vehicle propulsion system (we'll stick with the W-PHEV acronym) that allows the car to be charged wirelessly just by driving atop a special charging mat on the ground, the car's powertrain is just as futuristic as its exterior shape.
Other high-tech bits include holographic projections on the windshield showing the driver what's around him, with input coming from 10 high-res cameras and 18 micro high-precision sensors. The car also sports 4G wireless connectivity so that its occupants are always connected.

Opel to be shuttered in China, but will restart Buick production in Germany

Opel, General Motors' troubled German brand continues its quest to reinvent itself and find solid profitability. In the course of that metamorphosis, the company has a bit of good news/bad news today. The good news is, it will once again begin screwing together Buick models for the American market. The bad news, though, is that it's being shut down in yet another country, China.
Let's start with the good news. The last vehicle Opel's Ruesselsheim factory built for the North American market was the early run of the then-new Regal, which is based heavily on the Opel Insignia. Production ran for just over two years, from 2009 to 2011, before moving production to Oshawa, Ontario.
Now, thanks to a 245-million-euro investment (just over $336 million), Opel will kick off production of a unspecified model for the US in the "second half of the decade," according to Automotive News. According to Opel, the new model will be announced before the end of 2014. You can begin your speculation about this new model down in Comments (we're wagering it'll be the Cascada convertible, sold here under the Buick umbrella).