2008 Buick Lucerne Cxl 1 Owner Striking Ebony Lthr Woodgrain Pwr Pkg! Automatic on 2040-cars

Auto blog

GM recalls 2022 Cadillac XT5, XT6 and GMC Acadia for suspension issue

General Motors is recalling a relatively small number of 2022 Cadillac and GMC crossovers to address the potential for missing or loose rear suspension hardware that is being blamed on a lapse in quality control at the company's Spring Hill facility. The campaign covers 223 examples of the Cadillac XT5, 159 examples of the Cadillac XT6 and 354 examples of the GMC Acadia. "General Motors has decided that a defect, which relates to motor vehicle safety, exists in certain 2022 model year Cadillac XT5, XT6, and GMC Acadia vehicles," GM said in its defect report. "A fastener in the left-rear suspension toe link in some of these vehicles may not have been fully tightened during suspension assembly. After an assembly process was moved to a new area, error proofing equipment was not initially set up properly, which allowed a window where the operator might miss tightening certain fasteners without the failure being flagged." The issue was discovered by a quality engineer at the Spring Hill facility in March of this year, at which point GM conducted an audit to determine which and how many vehicles may have left the factory with improperly torqued or missing fasteners, narrowing down the recall population to the above 736 vehicles. No incidents associated with the defect have been reported in customer vehicles.  Related video: Recalls Buick Cadillac GM Ownership Safety

2020 Chevy Trax and Buick Encore spied testing

We just recently saw a little crossover SUV from General Motors being tested, and we weren't positive what brand it belonged to. We narrowed it down to Chevy or GMC, but we're feeling more confident that it's a GMC now, since both the next generation Chevy Trax and Buick Encore subcompact crossover SUVs have been spied testing together. Of the two, the Chevy has the more radically different sheet metal. It ditches the somewhat frumpy, lumpy shape of the current Trax for a body inspired by the bigger Chevy Blazer. The roofline has sharp corners, and the hood is wide and flat. The front fascia, though obscured, shows the most connection to the bigger crossover. It has the same split headlight configuration, and it looks as though the grille takes up a sizable section of the fascia. View 7 Photos The Buick Encore on the other hand looks evolutionary in design. The body still has plenty of curves, and the distinctive, sharply rising window sill are all hallmarks of the current Encore design. The headlights and grille are similar, too, though the grille appears to be slightly updated to fit in with the Enclave and Regal. It's understandable that Buick might want to play it safe with the new Encore, since the model is Buick's best seller, selling about 23,000 units in the last quarter, nearly twice that of the next best performer, the Enclave. Since this is the first time we've seen these little crossovers, we expect it will still be a year or two before we get to see them fully revealed. They will probably continue to use small-displacement turbocharged four-cylinder engines with either front- or all-wheel drive. Related Video:

Automakers' sound systems: Crank it, don't yank it

Years ago, one of the first things most music lovers did after buying a new vehicle was drive to an aftermarket stereo shop to get the crappy stock components swapped for better gear. And you'd typically get not only better sound but also more bang (and boom) for your buck. But in the past decade or so, the overall quality of OEM audio has dramatically increased, while car electronics became more complex, removing the incentive for most new vehicle owners — and all but the most hardcore DIYer — to start from scratch. In 2010, I did a comparison of the average costs for OEM electronics vs. similar offerings from the aftermarket, and back then automakers' stock premium systems were by far the best bargain — and are probably an even better value now. The premium 14-speaker, 1,200-watt JBL system in the all-new 2019 Toyota Avalon is a prime example of this trend. It's standard on the top two Limited and Touring trims and is available as a $680 audio upgrade on the XLE and XSE. I doubt you can even buy 14 speakers and 1,200 watts of amplification from the aftermarket for 700 bucks, much less have it all installed. And because the system is bundled with Toyota's Entune infotainment system, Apple CarPlay and a surround-view camera, removing the head unit means you would likely lose these features. Another advantage of OEMs and their audio partners is they can design the car around the audio system. In the past, automakers would typically place speakers where convenient for packaging, not for optimal sound reproduction, and audio engineers were forced to compromise. But as with the Avalon's premium JBL audio system, this is starting to change. At a recent behind-the-scenes peek for media into the process of developing the system, Toyota and Harman engineers delved into the minutia of sealing the inner panel of the front doors to create an enclosure for 6x8-inch woofers, making space in the pillars for JBL horn tweeters and extensively measuring the acoustic properties of the interior to tune the sound to the space. I'm met some creative and skilled car stereo installers, but none with a degree in psychoacoustics. The system is also the first to feature Quantum Logic Surround that creates a multi-channel listening experience from two-channel sources. And it includes Harman's Clari-Fi processing that "rebuilds key details lost" in compressed audio formats used by streaming music services and MP3s.