2006 Buick Lucerne Lx on 2040-cars

Auto blog

Even if GM does close all 5 of those plants, it'll still have too many

DETROIT — General Motors' monumental announcement on Monday that it will close three car assembly plants and two powertrain plants in North America and slash its workforce will only partially close the gap between capacity and demand for the automaker's sedans, according to a Reuters analysis of industry production and capacity data. Sales of traditional passenger cars in North America have been declining for the past six years and are still withering. After GM ends production next year at factories in Michigan, Ohio and Ontario, it will still have four U.S. passenger-car plants — all operating at less than 50 percent of rated capacity, according to figures supplied by LMC Automotive. In comparison, Detroit-based rivals Ford and Fiat Chrysler Automobiles will have one car plant each in North America after 2019. The Detroit Three are facing rapidly dwindling demand for traditional passenger cars from U.S. consumers, many of whom have shifted to crossovers and trucks. Passenger cars accounted for 48 percent of retail light-vehicle sales in the United States in 2014, according to market researchers at J.D. Power and Associates. This year, sedans will account for less than a third of light vehicle sales. That shift in turn has left most North American car plants operating far below their rated capacities, while many SUV and truck plants are running on overtime. The collapse in passenger-car demand is a challenge for nearly all automakers in the United States, including Japan's Toyota and Honda, which have the top-selling models in the compact and midsize car segments. Toyota executives said last month they are evaluating the company's U.S. model lineup. But Toyota also plans to build compact Corolla sedans at a new $1.6 billion factory it is building in Alabama with partner Mazda. The obstacles facing GM in its plans to close more auto factories became apparent on Tuesday as U.S. President Donald Trump threatened to block payment of government electric vehicle subsidies to GM. While it is not certain that Trump unilaterally has the power to do that, he made it clear he intends to use his office to pressure the company to keep open a small car plant in Ohio that GM says will stop building vehicles in March.

2020 Buick Encore drops more powerful 1.4-liter four-cylinder option

It's not just Chevrolet Equinox, Terrain and Traverse crossovers and Cadillac CT6 enjoying the engine and trim switcheroos this spring. Based on the order guide, CarsDirect reports that the Buick Encore, Buick's most popular model by far, will lose one of its two engines. The 2019 Encore offers a 1.4-liter four-cylinder in two guises: one with 138 horsepower and 148 pound-feet of torque, the other with 153 hp and 177 lb-ft and stop/start. The more powerful version will not be an option on the 2020 Encore. The upgraded motor is a $250 option, but only after spending an additional $2,600 to move up to the Sport Touring trim, or shelling out $6,100 to reach the Essence trim. Aggressive deals could make the higher trims more economical, though; at the time of writing, the Sport Touring Encore includes $3,250 cash allowance, making it $650 less expensive than the base Encore 1SV. The more powerful 1.4-liter engine also delivered better gas mileage, with buyers getting one more mile per gallon in combined driving. Even so, buyers didn't dig it. In comments to CarsDirect, a Buick spokesperson said those purchasing 2019 Encores have only chosen the burlier motor 12 percent of the time. The weak take-rate could end up doing Buick an easy favor. The Buick Encore GX is expected to make landfall on U.S. shores sometime this year, riding on a different platform than our present Encore, and bringing a longer wheelbase with it. It will slide into the lineup between the $23,200 Encore and $31,995 Envision. This is all hypothetical at the moment, of course, but that seems a perfect place to insert the 153-hp 1.4-liter as an exclusive standard feature.

Buick Blackhawk concept headed to auction block again

While the collector car auction market is often criticized for inflating the price of vintage models out of the realm of affordability for many buyers, these sales do give us an opportunity to look back on some of the beautiful, rare designs of the past. Just take a glance at this Buick Blackhawk concept with a shape right out of the '40s or '50s. Despite the heritage styling, it was pieced together from older pieces for Buick to celebrate itself in the early 2000s With styling inspiration from the classic Buick Y-Job concept car, the Blackhawk mixes actual vintage components to create its curvaceous shape. However, the power retractable top is thoroughly modern being made from carbon fiber and stows in the deck lid when the roof needs to go down. After so much work on the outside, the Buick has something equally surprising under the hood. It's a 1970 455-cubic-inch (7.5-liter) V8 GS Stage III V8 with a claimed 463 horsepower and 510 pound-feet of torque, and for easy cruising the mill is linked to a four-speed automatic. Built in-house by Buick, the Blackhawk was once part of the General Motors Heritage Fleet, but the automaker sold it off in 2009 at the Barrett-Jackson auction in Scottsdale, AZ, along with many other members of the collection. The concept went for $522,500 after the buyer's premium, according to the auctioneers. Now, it's crossing the block again with no reserve as part of RM Auctions sale of the Andrews Collection on May 2, 2015, in Fort Worth, TX. The 75-car auction also includes highlights like one of seven 1962 Ferrari 400 Superamerica SWB Cabriolet models bodied by Pininfarina. Featured Gallery Buick Blackhawk Concept News Source: RM Auctions, Barrett-Jackson AuctionsImage Credit: Darin Schnabel Courtesy of RM Auctions Design/Style Buick Auctions Convertible Concept Cars