2023 Buick Envision Preferred on 2040-cars

Auto blog

We really want to use an eCrate to restomod an old GM car. Here's what we'd build

You hopefully saw the news today of GM's introduction of its Connect and Cruise eCrate motor and battery package, which effectively makes the Bolt's electric motor, battery pack and myriad other elements available to, ah, bolt into a different vehicle. It's the same concept as installing a gasoline-powered crate motor into a classic car, but with electricity and stuff.  This, of course, got us thinking about what we'd stuff the eCrate into. Before we got too ahead of ourselves, however, we discovered that the eCrate battery pack is literally the Bolt EV pack in not only capacity but size and shape. In other words, you need to have enough space in the vehicle to place and/or stuff roughly 60% of a Chevy Bolt's length. It's not a big car, but that's still an awful lot of real estate. There's a reason GM chose to simply plop the pack into the bed and cargo area of old full-size SUVs. Well that, and having a rear suspension beefy enough to handle about 1,000 pounds of batteries.  So after that buzz kill, we still wanted to peruse the GM back catalog for classics we'd love to see transformed into an electric restomod that might be able to swallow all that battery ... maybe ... possibly ... whatever, saws and blow torches exist for a reason.  1971 Buick Riviera Consumer Editor Jeremy Korzeniewski: If you’re going to build an electric conversion, why not do it with style? ThatÂ’s why IÂ’m choosing a 1971-1973 Buick Riviera. You know, the one with the big glass boat-tail rear end that ends in a pointy V. Being a rather large vehicle with a big sloping fastback shape, IÂ’m hoping thereÂ’s enough room in the trunk and back seat to pack in the requisite battery pack. That would likely require cutting away some of the metal bulkhead that supports the rear seatback, but not so much that a wee bit of structural bracing couldnÂ’t shore things up. The big 455-cubic-inch Buick V8 up front will obviously have to go. Remember, this was the 1970s, so despite all that displacement, the Riviera only had around 250 horsepower (depending on the year and the trim level). So the electric motorÂ’s 200 horsepower and 266 pound-feet of torque ought to work as an acceptable replacement.   1982 Chevrolet S10 Associate Editor Byron Hurd: OK, so the name "E-10" is already taken by a completely different truck, but let's not let labels get in the way of a fun idea.

Buick Encore takes a hit of Mokka to tackle Dakar

There are many vehicles we'd consider taking racing. Even on a cross-country rally as punishing as the Dakar. But a Buick Encore? That's not one that would enter our motorsports-based consciousness. Yet it's basically what General Motors is entering in the South American rally raid this year, and you're looking at it.
Unveiled at the Moscow Motor Show, this rally machine is based on (or at least billed as) an Opel Mokka - the name that GM's European brand applies to the vehicle Americans know as the Encore, Buick's subcompact crossover. Only it's obviously been extensively modified. It's got a ten-inch raised suspension, a 137-gallon fuel tank, carbon-fiber bodywork and... hold on, we're sure we're missing something here. Oh, right: a 6.2-liter V8 kicking out 340 horsepower and 487 pound-feet of torque to all four wheels through a six-speed sequential gearbox.
In other words, this is not the same Encore (or Mokka) you can pick up at your local Buick, Opel or Vauxhall dealership. It's not even close. It's not even recognizable as such, really. It was unveiled alongside a more sedate Opel Mokka Moscow Edition and a slew of other local debuts for the Opel brand that you can read more about in the (translated and original) Russian press release below.

Lutz dishes dirt on GM in latest Autoline Detroit

Bob Lutz sits down for Autoline Detroit - Click above to watch video after the jump
Autoline Detroit recently played host to Bob Lutz, and, as is always the case, the former General Motors vice chairman dished out some great commentary. Lutz was promoting his new book Car Guys vs. Bean Counters: The Battle for the Soul of American Business, and talk quickly turned to his role as it related to product development and high-level decision making at GM. While on the topic of brand management, Lutz revealed a few rather interesting tidbits about his former employer:
All Chevrolet vehicles were required to have five-spoke aluminum wheels and a chrome band up front, as part of the Bowtie brand's overall image.