2010 1xl Used 3.6l V6 24v Automatic Front-wheel Drive Suv Onstar on 2040-cars

Auto blog

2017 Buick LaCrosse an evolution of sharp Avenir concept

After years as a bloated, uninspiring, but comfortable near-premium sedan, Buick has taken the wraps off a leaner, lither, far more stylish LaCrosse. The third-generation model has just made its debut at the 2015 Los Angeles Motor Show. While there's a lot to talk about, let's first address the new, Avenir-inspired sheetmetal. The fascia is basically the concept car smoothed over into production form, featuring the same winged trishield. In place of the chrome-trimmed waterfall, the LaCrosse gets a blacked-out, recessed grille with a chrome surround. It looks good in photos but it's better in person, adding a real sense of complexity and depth to the front end. The headlights and lower fascia, meanwhile, adhere closely to the concept. The same cannot be said of the LaCrosse's tail. While the taillight lighting pattern is similar, the overall shape of the lighting element is radically different, refining the design featured on the back of the Regal. Also gone, sadly, is the Avenir's boattail rear deck. Instead, the LaCrosse gets a small rear deck that curves up into a pleasant duckbill spoiler. The rest of the tail is pleasantly restrained. Perhaps the weakest point is the profile, where Buick has instituted a "split-spear" design, featuring a strong shoulder line above the rear wheel well, which sits below an even stronger character line that curves down and towards the front of the car. It strikes us as just a little too much, like the Impala. Underneath that sheetmetal, Buick has managed to trim nearly 300 pounds of body fat, nearly half of which came from the vehicle's actual structure. That 300 lbs, according to Buick's engineers, is equivalent to a Kenmore side-by-side refrigerator, in case you needed a helpful comparison. Despite the weight savings, Buick has upped the torsional rigidity for this new model by 15 percent. The LaCrosse's cabin features a strong, cockpit-like design, with a high, floating-bridge center console. This is possible due to Buick's adaption of the Electronic Precision Shift system, introduced earlier this month on the new Cadillac XT5. Despite the new-fangled console design, Buick's retained the wraparound cabin style introduced on the second-gen model. Based on a quick crawl around the interior, space is great in front, although ingress in back is somewhat difficult due to the roofline. You're probably wondering why we haven't said anything about the mechanicals just yet.

2020 Buick Encore drops more powerful 1.4-liter four-cylinder option

It's not just Chevrolet Equinox, Terrain and Traverse crossovers and Cadillac CT6 enjoying the engine and trim switcheroos this spring. Based on the order guide, CarsDirect reports that the Buick Encore, Buick's most popular model by far, will lose one of its two engines. The 2019 Encore offers a 1.4-liter four-cylinder in two guises: one with 138 horsepower and 148 pound-feet of torque, the other with 153 hp and 177 lb-ft and stop/start. The more powerful version will not be an option on the 2020 Encore. The upgraded motor is a $250 option, but only after spending an additional $2,600 to move up to the Sport Touring trim, or shelling out $6,100 to reach the Essence trim. Aggressive deals could make the higher trims more economical, though; at the time of writing, the Sport Touring Encore includes $3,250 cash allowance, making it $650 less expensive than the base Encore 1SV. The more powerful 1.4-liter engine also delivered better gas mileage, with buyers getting one more mile per gallon in combined driving. Even so, buyers didn't dig it. In comments to CarsDirect, a Buick spokesperson said those purchasing 2019 Encores have only chosen the burlier motor 12 percent of the time. The weak take-rate could end up doing Buick an easy favor. The Buick Encore GX is expected to make landfall on U.S. shores sometime this year, riding on a different platform than our present Encore, and bringing a longer wheelbase with it. It will slide into the lineup between the $23,200 Encore and $31,995 Envision. This is all hypothetical at the moment, of course, but that seems a perfect place to insert the 153-hp 1.4-liter as an exclusive standard feature.

The Chinese experiment | 2017 Buick Envision First Drive

The 2017 Buick Envision is a very good five-passenger crossover. The "but" you should anticipate will come in good time. First it's worth understanding why it exists at all. Out of the ashes of GM's bankruptcy a few flowers blossomed and the carmaker is doing exceptionally well, certainly far better than Chrysler has done in the wake of its free fall into Chapter 11. But of all the surprises at GM's turnaround, Buick surely ranks highest, without question the least likely player to thrive if you only study the North American market. Look farther than our shores, to China, however, and you won't be shocked. Note that the Envision, which has been on sale in China for a year and a half, will reach about 200,000 units this year; the entire Buick portfolio in the US only totaled 223,000 cars in 2015. Not only is China Buick's primary market, but what it makes there, like the Envision, is intended for a different sort of buyer. Here, we'd call it a compact crossover. In China the Envision is a relatively large car, and the buyer there is far more likely to use it as a tall limo, or at the very least, as a big-time status statement. That buyer is also very likely to be in his or her mid-30s – the average Buick buyer in the US is getting younger, but, at 58, is hardly a millennial. Still, Americans who buy the Envision will benefit from all of this China focus. Huge effort went into its development since the target competitor in China is the Audi Q5, according to Rick Spina, Executive Chief Engineer for the Envision. Spina explained that Buick went to the trouble and expense of isolating the entire chassis from engine, suspension, and driveline vibration and sound penetration. "If you look at non-luxury models like Ford Escape, Honda CR-V, nothing's isolated, everything is hard-bolted to the body, and so all that vibration goes into the frame." Spina says that even though you'd guess the China-built Envision shares the general parts bin of the Chevy Cruze and Equinox, it's almost entirely unique. "It's kind of an orphan," he says, because GM couldn't afford to invest in the ride tuning Buick had to have to compete with Audi in China for a volume Chevy product, so nothing from Chevy (for now) is on this platform. And although it would have made sense to have Cadillac or GMC share it, Cadillac's XT5 and GMC's Acadia were already on a different development cycle. Besides, he's pretty proud that the Envision was developed strictly for Buick.