Find or Sell Used Cars, Trucks, and SUVs in USA

2001 Bmw Z8 on 2040-cars

US $102,000.00
Year:2001 Mileage:35500 Color: with black piano hardwood interior accents with the rare and stunning red and black leather interior seats
Location:

Raleigh, North Carolina, United States

Raleigh, North Carolina, United States

Roughly modeled after the original 507, this particular car leaves nothing to be desired. A true classic from day one, this car continues to appreciate year after year.  Beautiful red exterior with black piano hardwood interior accents with the rare and stunning red and black leather interior seats.  Banjo spoked steering wheel and navigation system. 35500 pampered miles with service preformed at the BMW service center in Chapel Hill, NC.   This car runs and drives as expected, a true thoroughbred.  Only 2300 sold in the US out the nearly 5700 produced.   Removeable hardtop adds, rather than detracts, to the beautiful lines of the car.  Car has never been in an accedent, paint is spectacular.  No dings, dents or flaws, lines and seams are prefect.  Originally pruchased from Exoctic Motors in Flordia, I am the second proud owner.

There is no reserve on this car and it will be sold when initial bid is placed. I will be happy to answer your questions but generally the car speaks for itself.  Only mechanical repair ever reqiured was the replacement of a valve timing sensor and a rear tailight.  Scheduled serviced completed as recommended.  Unlike many exotics, this car can be serviced at your local BMW dealer without issues.  Parts inventory is to be maintained for 50 years.  Truely a very nice car.

 

I have included many of the excerpts from various sources below but be sure to read the wonderful accolades about these cars on the internet.

The BMW Z8is a roadsterproduced by German automakers BMWfrom 1999 to 2003. It was given the E52 BMW model code.

The Z8 was the production variant of the 1997Z07 concept car, the exterior was designed by Henrik Fisker and the interior was designed by ScottLempert at the BMW Group Research and Innovation Center (FIZ),Munich.The Z07 originally was designed as a styling exercise intended to evoke andcelebrate the 1956-'59 BMW 507. The Z07 caused asensation at the '97 Tokyo Auto Show. The overwhelming popularity of theconcept spurred BMW's decision to produce a limited production model called theZ8. There were 5,703 Z8s built, approximately half of which were exported tothe U.S

 

The originalZ07 had been designed with production in mind. As a result, practical andregulatory considerations necessitated very few changes for the productionmodel. Nevertheless, the windshield of the Z8 was extended upward, and a largerfront airdam was fitted. Both changes were implemented to provide aerodynamicstability and a reasonably placid cockpit environment. The four-spoke steeringwheel of the concept car was replaced by a three spoke design. The hardtop waschanged from a double-bubble form with a tapering faring to a single dome witha truncated convex backside. The concept's exotic driver's side helmet fairingwas eliminated to allow easy operation of the power soft top.

Despite thesechanges, the Z8 remained extremely faithful to the concept car. Theside-mounted turn indicators were integrated into the side vents in a fashionthat rendered them invisible until activated. The vintage simplicity of theinterior was preserved by hiding the modern equipment under retracting panels.Complex compound curves were preserved through the use of an expensiveMIG-welded aluminum space frame. The Z8 even retained the concept's five-spokewheel design, albeit without the race-style center lug nut.

The $128,000car had an all aluminum chassis and body and used a 4.9 L(4941 cc) 32-valve V8, that developed 400 hp (300 kW) and 500 N·m (370 lb·ft) torque.This engine, known internally as the S62, was built by the BMW Motorsport subsidiary and was shared with theE39 M5.[1] The engine was located behind the frontaxle in order to provide the car with 50/50 weight distribution. The factoryclaimed a 0–100 km/h (0–62 mph) time of 4.7 seconds; Motor Trend magazine achieved 0–96 km/h(0–60 mph) in 4.2 seconds. Road and Track measured the car's lateral grip at.92. Car and Drivermagazine also tested the car and found that it outperformed the contemporarybenchmark Ferrari 360 Modenain three important performance categories: acceleration, handling, and braking. As with most BMW products,its top speed was electronically limited to 155.4 mph (250 km/h).

The Z8 includedan innovative use of neon exterior lighting. The tail lights and turnindicators are powered by neon tubes that offer quicker activation thanstandard lightbulbs and are expected to last for the life of the vehicle.

Every Z8 wasshipped with a color-matching metal hardtop with rear defroster. Unlike manyaccessory hardtops, which are provided for practical rather than stylisticconsiderations, the Z8 hardtop was designed from the outset to complement thelines of the roadster.

BMW Z8 interior

In order tokeep the interior uncluttered, a number of convenience functions wereintegrated into multifunction controls. For example, the power windows andmirrors were controlled by a single instrument. Also, the center-mountedinstrument cluster was canted slightly toward the driver. The displacement ofthese gauges to the middle of the dash was intended to offer an unimpeded viewof the hood and the road ahead.

In order to promote the Z8 to collectors andreinforce media speculation about the Z8's "instant classic"potential, BMW promised that a 50-year stockpile of spare parts would bemaintained in order to support the Z8 fleet. Due to the limited volume of Z8production, all elements of the car were constructed or finished by hand,thereby compounding the importance of ongoing manufacturer support for the type

Introduced at the 1999Frankfurt Auto Show, the BMW Z8 sports car was the company's conception of whatits famous 507 roadster would have been if built past the 1950s. Stylistically,it offered many of the same cues, such as a long, sloping hood with roundheadlight blisters, twin-kidney grille, distinctive vents aft of the frontwheels and a striking leather interior with a simplistic layout.

Not all was retro,though. The Z8's aluminum space frame was draped with aluminum body panels, andhidden from view was BMW's typical front strut/rear multilink suspensionarrangement. For power, the Z8 relied on the same engine used for thethird-generation M5 sedan.

The BMW Z8 was alwaysintended to be a "halo" car, designed to draw attention to BMW andlead to increased sales of other BMW vehicles. BMW produced it for just fouryears with an annual production rate of about 1,500 cars. Naturally, Z8 ownershipis an exclusive club. Given that the 507 is coveted by collectors and a goodone can fetch more than half a million dollars, a similar future might be instore for the Z8.

MostRecent BMW Z8

The BMW Z8 roadsterwas produced for the 2000-'03 model years. It possessed all the necessaryingredients of a true sports car: superior performance, outstanding design andrarity.

Its all-aluminumchassis was exceptionally stiff and light, resulting in exemplary road feel.Driving hard, one could feel what was happening -- and, more important, whatwas going to happen -- better than seeing it. This lent extraordinaryconfidence when exploring the outer limits of its performance envelope.

Likewise, the steering,suspension and braking systems connected to this super-solid chassis operatedwith pinpoint precision. Many chassis components were borrowed from BMW'sworld-class sedans and recalibrated, and the resulting ride wasn't quite assupple as those vehicles but certainly not harsh either.

Under the hood was a4.9-liter V8 producing 394 horsepower and 368 pound-feet of torque. Power wassent to the rear wheels through a standard six-speed manual transmission. (Theone-year run of the Z8-based BMW Alpina came with an automatic transmission.)Thanks to its electronic variable valve timing system, the Z8 could purr abouttown, and then let loose with a shriek once pointed down a deserted road. Intests of the time, the Z8 typically posted 0-60-mph times in the mid-4-secondrange.

In general, the BMW Z8was a pretty easy car to drive. And thanks to BMW's effective Dynamic StabilityControl (DSC) system, the Z8 was kind to drivers who weren't professionallytrained. It combined antilock brakes, traction control and corneringstabilization to ensure that over-eager drivers were appropriately reined inbefore they completely lost their substantial investment in a smoldering heap.

Due to its stellarperformance, early association with James Bond in The World is Not Enough andthe reaction of people on the street, there was always a feeling that you weredriving a surreal Hollywood creation. When it rolled down the boulevard, peoplewere mesmerized by its stunningly unique styling and the sonorous note of itsexhaust system.

Perhaps even morebeguiling was its interior. In a nod to the past, BMW moved the speedometer,tachometer and other gauges to the center of the dash. The retro-styledsteering wheel also evoked classic sports cars with its three metal-roddedspokes and fat, leather-wrapped rim. What wasn't brushed aluminum was coveredin supple leather, including parts of the dash, center console, door skins andeven the rollover bars. The final touch was a viscerally black push-buttonstarter located next to the steering wheel. Turn the ignition key to On,depress that button and the muscular V8 roared to life -- a thrill every time.

 

 

Auto Services in North Carolina

Wilburn Auto Body Shop-Mooresville ★★★★★

Automobile Body Repairing & Painting
Address: 264 W Plaza Dr, Denver
Phone: (704) 469-4468

Westover Lawn Mower Service ★★★★★

Automobile Parts & Supplies, Gasoline Engines, Automobile Accessories
Address: 2856 Westover Dr, Providence
Phone: (434) 822-0138

Truck Alterations ★★★★★

Automobile Parts & Supplies, Window Tinting, Truck Accessories
Address: 716 Smoky Park Hwy, Chimney-Rock
Phone: (828) 633-2600

Troy Auto Sales ★★★★★

New Car Dealers, Used Car Dealers, Wholesale Used Car Dealers
Address: 100 N Lee Ave, Four-Oaks
Phone: (910) 892-7373

Thee Car Lot ★★★★★

Used Car Dealers
Address: 2498 Gillespie St, Autryville
Phone: (910) 485-0077

T&E Tires and Service ★★★★★

Auto Repair & Service, Automobile Diagnostic Service
Address: 2925 Eastway Dr, Charlotte
Phone: (704) 531-8095

Auto blog

BMW's Mini plant closes for 4 weeks for the Brexit that didn't happen

Mon, Apr 1 2019

LONDON — BMW's Mini plant in Britain is closing for four weeks starting Monday in a move planned over a half year ago to help the company deal with any disruption resulting from Brexit, which has since been delayed. The German carmaker, which builds just over 15 percent of Britain's 1.5 million cars, moved its annual summertime shutdown to April to "minimize the risk of any possible short-term parts-supply disruption in the event of a no-deal Brexit." But Britain's departure from the EU has now been pushed back from March 29 until at least April 12 or potentially much later, scuppering the timing of major contingency plans for some carmakers. Shutdowns are organized far in advance so employee holidays can be scheduled and suppliers can adjust volumes, making them hard to move. "This is what our company and our workforce have planned for over many months, and it is fixed into our business planning," said a BMW spokesman. It represents the latest headache for Britain's once roaring car sector which had been on track for record production but since 2017 has posted sharp falls in sales, output and investment. The overwhelmingly foreign-owned industry has become increasingly incredulous as a stable and attractive investment environment descends into one of its deepest political crises, risking the free and frictionless trade the sector relies on. BMW's Rolls-Royce factory in Goodwood will close for two weeks whilst Jaguar Land Rover's (JLR) three car plants and engine facility and Honda's Swindon facility will also shut for a few days this month as part of Brexit contingencies. It has been a turbulent few months for the sector after Nissan canceled plans to build a new sport utility vehicle at its English Sunderland plant and Honda said it would shutter its plant in 2021 in the biggest blow to the sector for years. Toyota provided a rare boost when it announced plans to build cars for Suzuki at its English car plant. BMW, which is also closing its central English Hams Hall engine facility and Swindon press shop and sub-assembly site for four weeks, has said it could move some engine and Mini output out of Britain if there is not an orderly Brexit. Carmakers face a number of risks if there is a disorderly Brexit, including delays to the supply of ports and finished models, new customs bureaucracy, the need to recertify models and an up to 10 percent tariff on finished vehicles.

BMW broadens engine bolt recall to nearly half-million cars worldwide

Fri, 11 Apr 2014

Almost one month ago, we reported on a BMW investigation into a potentially defective bolt that lived in the company's VANOS variable valve timing system. At that point, the potential recall was seemingly limited to Chinese-market cars; the company was filing a recall application with Chinese officials.
Today, Bloomberg is reporting that the engine bolt issue has expanded into a recall for several world markets, involving some 489,000 vehicles. BMW was able to verify that report to Autoblog, while also providing a great deal more detail about the issue and vehicles affected.
The recall affects vehicles powered by N55 inline six-cylinder gasoline engines equipped with VANOS and Valvetronic technologies. 1 Series, 3 Series, 5 Series and 5 Series Gran Turismo, X3, X5, X6 and Z4 models from the 2010 to 2012 model years are included, as is the 2012 6 Series.

Did BMW drag its feet on Mini recall?

Mon, Sep 28 2015

The National Highway Traffic Safety Administration is opening an investigation into BMW's reporting of a recall for 30,456 examples of the 2014-2015 Mini Cooper Hardtop, Cooper S, and the 2015 John Cooper Works. According to the government, "it appears from a review of NHTSA's databases that BMW may have failed to submit recall communications to NHTSA in a timely manner." The automaker issued the recall in July because crash tests showed the models didn't meet side impact requirements for passengers in the back seat. While there were no reported injuries at the time, the company decided to install energy-absorbing material in the space between the rear interior panels and the exterior. However, NHTSA has decided to investigate whether this campaign should have started much earlier, given the evidence the company had. According to the government's report, the Cooper Hardtop failed side-impact tests in 2014, although one of these tests was five-miles-per-hour faster than the Federal Motor Vehicle Safety Standard. The agency claims: "In January 2015 BMW verbally committed that it would conduct a service campaign to add padding to the rear side panels of MY 2015 Mini 2 Door Hardtop Cooper models. However, BMW did not initiate the service campaign and failed to inform NHTSA of its failure to do so." A subsequent crash test of an example with this fix showed it to make the vehicle compliant with the rules. Mini spokesperson Mariella Kapsaskis told Autoblog: "Regarding the NHTSA audit query, BMW Group is evaluating the request and will respond to NHTSA as appropriate." INVESTIGATION Subject : BMW Reporting & Timely Recall Execution Date Investigation Opened: SEP 24, 2015 Date Investigation Closed: Open NHTSA Action Number: AQ15004 Component(s): STRUCTURE All Products Associated with this Investigation Vehicle Make Model Model Year(s) MINI COOPER 2014-2015 MINI COOPER S 2014-2015 MINI JOHN COOPER WORKS 2015 Details Manufacturer: BMW of North America, LLC SUMMARY: NHTSA is opening this AQ to better understand and evaluate BMW's process(es) for its notification procedures and for timely and efficient execution of its safety recall campaigns. In mid-2014, NHTSA's New Car Assessment Program (NCAP) had side impact moving deformable barrier (MDB) tests performed on two model year (MY) 2014 Mini 2 Door Hardtop Coopers. These two tests were performed at a speed 5 mph higher than required by Federal Motor Vehicle Safety Standard (FMVSS) 214, Side impact protection.