Navigation+back-up Cam+hud+rear Ent+run Board+htd/cld Seats++more on 2040-cars

Auto blog

What happens when you take an engineer sliding in a BMW i8

The BMW i8 is a pretty impressive car, and a highly visible one at that. It's a great brand ambassador, but not just for BMW. It's really no surprise that Formula E chose it as the safety car from the electric racing series. And, for its duties at tracks around the word, the i8 safety car got some slick upgrades, including wireless charging capabilities courtesy of Qualcomm. It's not your regular, cut-and-dry technology presentation. In the video below, Qualcomm engineers explain a little bit about what they do to enhance electric vehicles. But it's not your regular, cut-and-dry technology presentation. The engineers are forced to answer questions about Qualcomm's technology while riding along in the BMW i8 Qualcomm Safety Car driven by none other than Formula E driver Nelson Piquet, Jr. Sure, riding shotgun for hot laps at Donnington Park in an i8 sounds like a lot of fun, but these guys have a job to do, and Mr. Piquet isn't making it easy for them. The Qualcomm guys talk about taking technology and beefing it up for automotive use, explain the benefits of wireless charging and discuss some other stuff that's hard to pay attention to while watching the i8 get totally sideways in a smoky powerslide. See for yourself in the video below. If you miss something, don't worry; Qualcomm provides more explanation about its automotive technologies at its website, including safety, communication and, of course, inductive charging.

BMW recalling 40k+ motorcycles to replace rear wheel flange

A problem with the rear wheels on a wide array of its motorcycles has prompted BMW and the National Highway Traffic Safety Administration to issue a recall for 43,426 vehicles. In the affected units, the mounting flange on the rear wheel is at risk of cracking if the bolts are over-tightened. If that flange cracks, "the rear wheel may not remain secured to the motorcycle," which is kind of important considering there are only two wheels on a motorcycle to start with. The recall affects certain model-year 1200 and 1300 models – including the R1200GS, R1200RT, R1200GS, R1200R, R1200S, R1200ST, K1200S, K1200R, K1200R Sport, K1200GT, K1300S, K1300R and K1300GT – as well as the HP2 Megamoto, HP2 Enduro and HP2 Sport. Owners of the affects units can expect to head from the manufacturer to arrange having the aluminum flange replaced with a steel one. Related Video: RECALL Subject : Rear Wheel Mounting Flange may Crack Report Receipt Date: MAR 11, 2015 NHTSA Campaign Number: 15V141000 Component(s): WHEELS Potential Number of Units Affected: 43,426 Manufacturer: BMW of North America, LLC SUMMARY: BMW of North America, LLC (BMW) is recalling certain model year 2005-2010 R1200GS and R1200RT, 2006-2010 R1200GS Adventure, 2007-2010 R1200R, 2007 R1200S and K1200R Sport, 2005-2007 R1200ST, 2008-2009 HP2 Megamoto, 2006 HP2 Enduro, 2008-2010 HP2 Sport, 2005-2008 K1200S, 2006-2008 K1200R, K1200GT, 2009-2011 K1300S, 2010-2011 K1300R, and 2009-2010 K1300GT motorcycles. In the affected motorcycles, the rear wheel mounting flange may crack if the rear wheel mounting bolts are over tightened. CONSEQUENCE: If the rear wheel mounting flange cracks, the mounting bolts may loosen and the rear wheel may not remain secured to the motorcycle, causing a loss of stability and increasing the risk of a crash. REMEDY: BMW will notify owners, and dealers will replace the existing aluminum rear wheel flange with a steel one, free of charge. The recall is expected to begin April 21, 2015. Owners may contact BMW customer service at 1-800-525-7417. NOTES: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov. Featured Gallery BMW HP2 Sport View 13 Photos News Source: National Highway Traffic Safety AdministrationImage Credit: BMW Recalls BMW Motorcycle bmw motorrad

BMW discussing supercar collaboration with McLaren

BMW is reportedly considering a new halo supercar. But rather than go it alone, word has it that the Bavarian automaker is discussing a potential partnership with McLaren to make the idea a reality. This according to Britain's Car magazine, which suggests that negotiations are well underway. The proposal would see the BMW supercar based on the same architecture that will to underpin Woking's P16 project that's set to replace current 650S. Rather than use the 3.8-liter twin-turbo V8 that McLaren developed together with Ricardo, the Bimmer version would use Munich's own engine: a 4.0-liter V8 with quad turbochargers – two conventional spools and two more electrically driven chargers. Their combined effect would net an expected 750 horsepower. Further differentiations on McLaren's carbon monocoque architecture for use in the BMW would include custom bodywork, aerodynamics, and interior fitments to include a unique instrument panel. Production, however, would be handled at the McLaren Production Centre in Woking, to the tune of several hundred units per year. The project would take the place of several aborted programs undertaken internally at BMW. One called for an entirely unique supercar developed in-house, referred to internally as the M100. When that project was aborted so that BMW could concentrate on the i sub-brand, BMW's own skunkworks shifted its focus to developing a more performance-focused version of the i8, known by some as the i8 CSi. When that project was canned as well, discussions with McLaren commenced. It wouldn't be the first time BMW would outsource development of its own supercar, or even the first time BMW would collaborate with McLaren on such a project. Initial development work on the original M1 in the 1970s was undertaken by Lamborghini before being taken in-house. And, of course, BMW provided the engine for the legendary McLaren F1. Meanwhile McLaren performed a similar function for Mercedes-Benz with the SLR, demonstrating Woking's experience in building flagship supercars for German automakers. This latest project could suffer the same fate as the M100 and i8 CSi programs. But if it is approved, it could yield both coupe and convertible versions, with the first slated to surface at the Frankfurt Motor Show in 2017 and reach dealerships in 2019.