2011 Bmw M3, Jerez Black, Competition/premium/convenience/tech Packages on 2040-cars

Auto blog

BMW makes the M4 extra special with a huge wing

BMW has all of the bases covered in its lineup, especially when it comes to its 4 Series models. Don't like going to the track? There's the BMW 430i and 440i, which are available as a coupe and gran coupe. Drivers looking for a track-friendly car that can also be used on the road will be steered toward the M4. BMW even built the hardcore M4 GTS for drivers that spend all of their time on a track. Now, it looks like BMW is trying to bridge the gap between the M4 and the M4 GTS with a special-edition model. Our photographers caught BMW testing an M4 with some extreme aerodynamic components around the Nurburgring. With its aggressive front end, massive wing, and sporty rear diffuser, the prototype M4 appears to be similar to the special-edition M4 Competition Sport that BMW released in Spain. The Spain-only special edition was marketed as a softer version of the M4 GTS with less power and usable rear seats. With a similar look and visible rear seats, this prototype indicates a similar track-focused special edition model. Since the M4 is only a few years old, it's unlikely that BMW is testing a new model, but the automaker could be testing aerodynamic components for a refreshed model down the road. A cheaper, more usable M4 GTS, though, would be the perfect car to round out BMW's current lineup. Related Video:

BMW almost ready to roll out new 2 Series cabriolet

The 2 Series is a relatively new member of the BMW family, having been spun off of the 1 Series (itself one of the company's youngest lines) just last year. So far the range has been split between the Active Tourer and the 2 Series Coupe, but soon the latter will breed a new compact convertible to take the place of the outgoing 1 Series cabriolet, and here we have our best look at it yet.
Spied with the most minimal camouflage and its top down while undergoing its final rounds of development testing, this pre-production 2 Series cabrio looks about ready for show time. While the Active Tourer is based on a different front-drive platform, this convertible is, as you might have guessed, essentially a 2 Series Coupe with a folding fabric roof. That means rear-wheel drive (or potentially all-wheel drive if BMW extends its availability from the coupe to the convertible) win either 228i or M235i specification - both of them turbocharged, the former with a 240-horsepower, 2.0-liter four and the latter with the 320-hp, 3.0-liter inline-six.
Considering that BMW got an approximately $8k premium for the 1 Series convertible over the coupe, expect the 2 Series cabrio to start at a little over $40k for the 228i and top out at around $53k for the M235i xDrive convertible. That is, assuming BMW offers it in that top spec, because at that rate we're getting perilously close to the $54,900 base price of the 435i convertible.

Recharge Wrap-up: Reverse graffiti powered by Nissan Leaf; BMW introduces Wallbox Pro

BMW has a new, faster version of the Wallbox home EV charger. The Wallbox Pro offers 7.4 kilowatts, and can charge the BMW i3 to 80 percent in under three hours. It features a seven-inch touchscreen and proximity sensor, plus an 11.5-foot cord. The Wallbox Pro can also be used with smart home systems such as lighting and heating. The Wallbox Pro is available in Europe, and will come to the US later in the year. Read more at Hybrid Cars. Nissan is using the Leaf to power the creation of "reverse graffiti" in London. The company has commissioned artist Moose to selectively wash dirt off of a wall outside of a subway station, leaving behind a mural of London landmarks. Moose used a jet washer powered by the Leaf's battery to create the piece. The goal is to highlight the amount of pollution in London and other large cities, which is not a new idea. "It is a reminder that electric vehicles don't have an exhaust to emit the kind of air pollution which has stained the wall Moose has created his piece on," says Nissan's Jean-Pierre Diernaz. See the artwork in the gallery, and read more in the press release below. Local Motors used a 3D printer to make the Strati electric car in 44 hours. The car was printed with 212 layers of carbon-reinforced ABS thermoplastic. After printing, the team then spent two days finishing the car to make it run. It is powered by the drivetrain from a Renault Twizy, and is capable of 40 miles per hour. Now the question is if this sort of small-scale car manufacturing using 3D printing technology will catch on. See how a car gets printed in the time-lapse video below, and read more over at Treehugger. Nissan cleans up London with the world's first car-powered graffiti - Nissan LEAF powers "Reverse Graffiti" street art in Waterloo - Mass-scale mural imagines a cleaner London, without car fumes - The artwork is on show in Waterloo, London near popular Southbank LONDON – Nissan is highlighting London's battle with air quality in the UK by using the 100% electric Nissan LEAF – the world's best-selling electric vehicle (EV) – to power a striking piece of street art in Waterloo, London that depicts the capital's iconic skyline. Nissan commissioned Reverse Graffiti artist Moose – the founder of his field – to create the mass-scale mural, which was unveiled today. Unlike traditional graffiti, Moose creates his art by cleaning dirt off surfaces using a jet washer or wire brush, leaving a striking design in negative on the wall.