4.8i Awd Sport Navigation Pano Roof Park Assist Htd Ac Mem Seats 2007 Bmw X5 65k on 2040-cars

Auto blog

BMW i8 fully revealed ahead of Frankfurt debut

It may be early in the morning here in the US, but in Germany, the first day of the 2013 Frankfurt Motor Show is in full swing. BMW took advantage of the early start and showed off its long-awaited i8 plug-in hybrid sportscar, a two-plus-two, swan-wing-doored coupe, to the Frankfurt crowd.
We drove a BMW i8 prototype back in August, so many of the things we're reading today are clarifications on our initial suspicions or speculations. Underhood sits a 1.5-liter, turbocharged, three-cylinder engine. On its own, it churns out a respectable 231 horsepower and 236 pound-feet of torque, which is then channeled to the rear wheels by way of a six-speed automatic transmission. An electric motor, meanwhile, sends 131 hp and 184 lb-ft of torque through a two-speed automatic to the front wheels.
With all-wheel drive at its disposal, the total system power sits at 362 hp and 320 lb-ft of torque, and allows the i8 to scamper to 62 miles per hour in just 4.4 seconds. That excellent performance is offset by an estimated fuel economy figure of 94 miles per gallon, though, making this a fast and efficient vehicle. Charging is impressively fast on the i8, with a full charge coming from a 110-volt outlet in under four hours. A BMW Charging Station will trim the charge time down to 1.5 hours.

BMW Active Tourer to hit US showrooms in 2015

It's been over a year since BMW unveiled the Concept Active Tourer at the Paris Motor Show, and another four months since it brought the concept back in Outdoor guise (pictured above). Now word has it that the Bavarian automaker is putting it into production.
Although production specs and dimensions have yet to be revealed, the Concept Active Tourer came in a bit smaller than the existing BMW X1. The production version is expected to be based on the same platform that underpins the new Mini hatchback revealed last week in LA, meaning that it will be predominantly front-drive, but an all-wheel-drive version could follow.
There will also be a longer version with a third row of seats, forming part of a new generation of front-drive BMWs to take on the likes of the Audi A1 and Mercedes-Benz A-Class family, of which the GLA will be the Active Tourer's most direct rival. Expect the Active Tourer to arrive in 2015 with a new front-drive sedan to follow in 2017 aimed particularly at the North American and Chinese markets.

New BMW i3-like Visio.M EV concept uses lightweight resin

It's not a new version of the BMW i3, but an updated version of a lightweight concept car from SABIC, BMW, the Technical University of Munich, Daimler and others does bear a certain resemblance to the well-designed plug-in city car. From the black "glass" in the hatch to the angled line tail lights to the up-and-down window line, you can see a sort of family resemblance (see an i3 comparison photo here). And, of course, they both have an electric powertrain. But the changes made to the new lightweight urban electric concept vehicle is more of an exercise in what's possible rather than a way to evolve the i3 and i8 into a broader i family of vehicles. Even so, what we see here is interesting, since SABIC found all sorts of new ways to take weight out of the car as part of the Visio.M (Visionary Mobility) project, which was first announced in 2012. Let's start with the window material, which as you might guess from the quotation marks above, is not made of glass but is instead SABIC's Lexan polycarbonate (PC) resin plastic. The lower weight (the PC helps shed about 29 pounds) adds two miles of range while the PC resin has better thermal conductivity compared to glass and so does even more because the HVAC system can be more efficient. According to SABIC's computational fluid dynamics analysis, an extra 9-10 miles of range, in fact. Without the battery, this concept weighs just 992 pounds. Remember, BMW already made a lot of weight-reduction measures in the i3 thanks to carbon fiber reinforced plastic, so to make the "glass" lighter would only help boost efficiencies on a production vehicle that uses a resin like this. Read more below. SABIC's LEXAN™ resin delivers weight savings and thermal efficiency for new ultra-lightweight electric car concept developed by BMW-led Visio.M Consortium Munich, October 20, 2014 Today, at the Technical University of Munich (TUM), BMW, Daimler, TUM scientists and a consortium of industry participants showcased a lightweight urban electric concept vehicle with various advances, including an all-plastic design of the car's windows. The windows are made of LEXAN resin, a polycarbonate (PC) material, and coating technologies from SABIC, a leading developer of PC glazing for automotive windows and many other thermoplastic solutions for the automotive industry.