2013 Bmw X5 Xdrive35i Navigation 3rd Row Seating Factory Warranty on 2040-cars

Auto blog

Consumer Reports selling its road-tested roadsters [w/video]

Here's a chance to acquire a celebrity-owned vehicles, and this time at a discount instead of a premium. So the celebrity in this case is Consumer Reports, that magazine that could be equally adored and abhored by car enthusiasts. CR buys all of its test vehicles and usually finds willing second owners within its own ranks, but its opening its small used-car lot to the public. On the forecourt are four roadsters: an automatic 2012 Audi TT 2.0 TFSI Quattro S-Tronic with 6,600 miles for $36,500, a manual 2012 BMW Z4 sDrive28i with 8,400 miles for $45,000, a manual 2012 Mercedes-Benz SLK250 for $39,500 and a manual 2013 Porsche Boxster with 7,000 miles for $48,000.
Those numbers mean a savings of $9,000 to $10,000 before haggling - each car is listed with an "Asking price" so there could be some wiggle room if you show up with pockets full of dough and eyes full of serious intent. Since the money CR earns from the sales go back into the magazine's budget to buy more test cars, however, it probably won't take any oddball trades, so you can forget about getting any purchasing help from that track-day AMC Javelin project on blocks in the back yard.
The vehicles have been taken care of and spiffed up for sale; buyers will take delivery at the CR test track in East Haddam, Connecticut and get a tour of the facilities. While you're there they'll even take you on a lap around the track so you can feel how your car handles when driven by one of its testers. They will probably not help you with advice on which toaster and dehumidifier to buy - you'll still need to get a subscription for that. Have a look at the video below to see a day in the life of a CR test car.

BMW mulled ten, eight, and six-cylinder engines for i8 before going hybrid

There's little doubt that the 2015 BMW i8 is one of the most radical and groundbreaking performance cars this industry has seen in a long time. From its unique carbon-intensive construction to its 1.5-liter, three-cylinder and electric motor plug-in powertrain to its concept-car appearance, the flagbearer for BMW's new i venture challenges the very notion of what it takes to be a supercar.
Yet apparently the i8 almost didn't do that at all. Yes, it probably still would've had innovative assembly techniques, serious performance and come-hither bodywork, but according to a new report in the Telegraaf, it was very nearly a much more conventional beast, drawing its power from a V10 engine. According to the report, that line of development never got much beyond the drawing board, but BMW engineers then shifted their focus to both V8 and six-cylinder motivation, going so far as to build prototype cars. The higher cylinder-count engines were eventually dropped altogether after BMW decided to turn the i8 into a hybrid, with the six-cylinder reportedly nixed due to heat management and weight issues. In the end, of course, BMW went with the PHEV powertrain that offers a total system output of 362 horsepower and 420 pound-feet of torque - plenty of thrust for this lightweight, all-wheel drive coupe while still enabling an incredible 94 miles to the gallon on the EU cycle. Regardless of how it turned out, it's still fascinating to think that BMW didn't have a much firmer conceptual idea of what it was after when it started the i8's development.
Here at Autoblog, we're genuinely thrilled about this new generation of greener hybrid super- and hypercars, a movement spearheaded by the i8, Porsche 918 Spyder, Ferrari LaFerrari and McLaren P1. But even so, our inner-gearheads can't help but wonder what might have been had BMW pursued a more conventional i8, either in place of, or in addition to, the car they did build. What do you think? Have your say in Comments.

BMW i3s traction control tech going in all BMW, Mini cars

The BMW i3s is essentially a warmed-up version of the i3 electric car we all know and love. The performance boost isn't huge — just 14 horsepower and 15 pound-feet of torque — but it also gets a new suspension, wheels and tires as well as an improved traction control system. We found the car to benefit from all the updates when we drove it for our First Drive Review, but now BMW has offered up more details on just how the traction control system of the i3s helps make it better to drive. The company says it'll expand the technology to all future BMW and Mini models as well. The i3s's system is calibrated to help it to pull away quickly from a stop, making full use of the instantaneous torque offered by the electric motor. It also improves stability when accelerating out of corners, when using regenerative braking and, of course, when the road conditions are less than ideal. The results are palpable, and with the other improvements the i3s definitely feels stronger off the line, as we found on our drive. It's also about a half-second quicker to 60 miles per hour, at 6.8 seconds. The secret is in the response time of the stability control, which BMW claims is 50 times faster than the conventional system. This is made possible by moving the control process into the powertrain itself, rather than a remote unit. This reduces the signal path and, thus, the response time of the traction control system. BMW's Head of Chassis Development, Peter Langen, said of it, "With their high levels of torque and instantaneous responses to every movement of the accelerator, electric motors already make significantly higher demands on driving stability systems than conventional power units." While engineered to make the most of the electric motor, BMW says the shorter cycles of this traction control system show promise for internal combustion vehicles as well. As such, we'll begin to see the improved technology applied across the BMW and Mini lineups going forward. Related Video: