2009 Bmw X5 35d X Drive Turbo Dsl(bmw Serviced ) on 2040-cars

Auto blog

New BMW i3-like Visio.M EV concept uses lightweight resin

It's not a new version of the BMW i3, but an updated version of a lightweight concept car from SABIC, BMW, the Technical University of Munich, Daimler and others does bear a certain resemblance to the well-designed plug-in city car. From the black "glass" in the hatch to the angled line tail lights to the up-and-down window line, you can see a sort of family resemblance (see an i3 comparison photo here). And, of course, they both have an electric powertrain. But the changes made to the new lightweight urban electric concept vehicle is more of an exercise in what's possible rather than a way to evolve the i3 and i8 into a broader i family of vehicles. Even so, what we see here is interesting, since SABIC found all sorts of new ways to take weight out of the car as part of the Visio.M (Visionary Mobility) project, which was first announced in 2012. Let's start with the window material, which as you might guess from the quotation marks above, is not made of glass but is instead SABIC's Lexan polycarbonate (PC) resin plastic. The lower weight (the PC helps shed about 29 pounds) adds two miles of range while the PC resin has better thermal conductivity compared to glass and so does even more because the HVAC system can be more efficient. According to SABIC's computational fluid dynamics analysis, an extra 9-10 miles of range, in fact. Without the battery, this concept weighs just 992 pounds. Remember, BMW already made a lot of weight-reduction measures in the i3 thanks to carbon fiber reinforced plastic, so to make the "glass" lighter would only help boost efficiencies on a production vehicle that uses a resin like this. Read more below. SABIC's LEXAN™ resin delivers weight savings and thermal efficiency for new ultra-lightweight electric car concept developed by BMW-led Visio.M Consortium Munich, October 20, 2014 Today, at the Technical University of Munich (TUM), BMW, Daimler, TUM scientists and a consortium of industry participants showcased a lightweight urban electric concept vehicle with various advances, including an all-plastic design of the car's windows. The windows are made of LEXAN resin, a polycarbonate (PC) material, and coating technologies from SABIC, a leading developer of PC glazing for automotive windows and many other thermoplastic solutions for the automotive industry.

BMW i8 with 500+ horsepower in the cards?

While BMW makes plenty of machinery to keep enthusiasts interested, its most enticing models are often based on more ordinary ones. That's what made the arrival of the i8 so captivating, emerging as the first stand-alone BMW sports coupe since the M1. But if its dual purpose - trying its best to both embrace the earth and traverse it rapidly - somehow left you disappointed, the next development could prove to fix that.
According to Automobile, BMW is working on a more potent i8S model. The hardcore version of the hybrid sports car would offer more power and a stiffened chassis to make it that much more aggressive. The Bavarian automaker is reportedly still evaluating two potential powertrain options: The first would pair a 2.0-liter twin-turbo four-cylinder good for 320 horsepower to an electric motor with another 204 hp. The second would use a 3.0-liter straight six with 480 hp and an electric motor with 109 hp. Both would be mated to a nine-speed dual-clutch transmission and an integrated starter motor packing an extra 27 hp.
Either way, we'd be looking at a combined output well in excess of 500 horsepower - far more than the existing i8's 228-hp turbo three and 129-hp electric motor - dropping the 0-62 time down from 4.1 seconds to an estimated 3.5. Couple that to a more advanced carbon chassis, wider tires and other goodies, and the i8 would be transformed into a far more capable performance machine than it already is.

Recharge Wrap-up: Reverse graffiti powered by Nissan Leaf; BMW introduces Wallbox Pro

BMW has a new, faster version of the Wallbox home EV charger. The Wallbox Pro offers 7.4 kilowatts, and can charge the BMW i3 to 80 percent in under three hours. It features a seven-inch touchscreen and proximity sensor, plus an 11.5-foot cord. The Wallbox Pro can also be used with smart home systems such as lighting and heating. The Wallbox Pro is available in Europe, and will come to the US later in the year. Read more at Hybrid Cars. Nissan is using the Leaf to power the creation of "reverse graffiti" in London. The company has commissioned artist Moose to selectively wash dirt off of a wall outside of a subway station, leaving behind a mural of London landmarks. Moose used a jet washer powered by the Leaf's battery to create the piece. The goal is to highlight the amount of pollution in London and other large cities, which is not a new idea. "It is a reminder that electric vehicles don't have an exhaust to emit the kind of air pollution which has stained the wall Moose has created his piece on," says Nissan's Jean-Pierre Diernaz. See the artwork in the gallery, and read more in the press release below. Local Motors used a 3D printer to make the Strati electric car in 44 hours. The car was printed with 212 layers of carbon-reinforced ABS thermoplastic. After printing, the team then spent two days finishing the car to make it run. It is powered by the drivetrain from a Renault Twizy, and is capable of 40 miles per hour. Now the question is if this sort of small-scale car manufacturing using 3D printing technology will catch on. See how a car gets printed in the time-lapse video below, and read more over at Treehugger. Nissan cleans up London with the world's first car-powered graffiti - Nissan LEAF powers "Reverse Graffiti" street art in Waterloo - Mass-scale mural imagines a cleaner London, without car fumes - The artwork is on show in Waterloo, London near popular Southbank LONDON – Nissan is highlighting London's battle with air quality in the UK by using the 100% electric Nissan LEAF – the world's best-selling electric vehicle (EV) – to power a striking piece of street art in Waterloo, London that depicts the capital's iconic skyline. Nissan commissioned Reverse Graffiti artist Moose – the founder of his field – to create the mass-scale mural, which was unveiled today. Unlike traditional graffiti, Moose creates his art by cleaning dirt off surfaces using a jet washer or wire brush, leaving a striking design in negative on the wall.