2017 Bmw M4 Coupe on 2040-cars

Auto blog

BMW to change model designations, further yet from actual displacement?

Once upon a time, you could look at the back of a trunk lid of a BMW and come up with a pretty fair idea of what sat under its hood. For example, a 320i was a 3 Series with a fuel-injected, 2.0-liter engine, a 328i was a 3 Series with a fuel-injected, 2.8-liter engine and a 328Ci was a two-door 3 Series with the same engine. Those were good days.
Today, though, that simplicity is dead and gone. A 328i now has a 2.0-liter engine, just like the 320i, while the simple "C" designation that was affixed to two-door models has been replaced with a "4," so we have a 428i and a 435i. It gets worse, though. A 550i uses a 4.4-liter, twin-turbocharged V8 (it should be a 544ti, although we'd be willing to hear an argument for "tti") and a 740i uses a 3.0-liter, turbocharged six-cylinder, which is the same engine found in a 535i. It's madness.
And, well, it's about to get madder, if a post on a BMW enthusiast forum is to be believed. According to f30post.com, we could see a shakeup in at least the 3 and 4 Series nomenclature, thanks to an impending refresh that will see the addition of new, turbocharged four- and six-cylinder engines, codenamed B48 and B58, respectively.

BMW preparing new M4 GTS with water injection

Last month, BMW revealed a new safety car for the MotoGP series. Only instead of just taking one of its production models and giving it some flashing lights, special livery and emergency equipment, the Bavarian automaker used the specially equipped M4 to showcase a new water injection system. And now word has it that the tech is being worked into a new M4 GTS. The system sprays water into the combustion chamber in order to lower the temperature of the air and increase the engine's efficiency, thus allowing it to produce more power without overheating, and relying less on ambient temperatures. It does require refilling a 1.3-gallon water tank in the trunk, though. According to Car and Driver, it's that same system that BMW will be installing in the new M4 GTS, taking the place of previous M3 GTS specials. If precedent is anything to go by, the M4 GTS will also be stripped of excess weight and feature a tighter suspension, stickier tires and more, in order to make BMW's muscle coupe even more hardcore and focused for the track. We could be looking at a debut as early as Pebble Beach in August.

BMW recalling 40k+ motorcycles to replace rear wheel flange

A problem with the rear wheels on a wide array of its motorcycles has prompted BMW and the National Highway Traffic Safety Administration to issue a recall for 43,426 vehicles. In the affected units, the mounting flange on the rear wheel is at risk of cracking if the bolts are over-tightened. If that flange cracks, "the rear wheel may not remain secured to the motorcycle," which is kind of important considering there are only two wheels on a motorcycle to start with. The recall affects certain model-year 1200 and 1300 models – including the R1200GS, R1200RT, R1200GS, R1200R, R1200S, R1200ST, K1200S, K1200R, K1200R Sport, K1200GT, K1300S, K1300R and K1300GT – as well as the HP2 Megamoto, HP2 Enduro and HP2 Sport. Owners of the affects units can expect to head from the manufacturer to arrange having the aluminum flange replaced with a steel one. Related Video: RECALL Subject : Rear Wheel Mounting Flange may Crack Report Receipt Date: MAR 11, 2015 NHTSA Campaign Number: 15V141000 Component(s): WHEELS Potential Number of Units Affected: 43,426 Manufacturer: BMW of North America, LLC SUMMARY: BMW of North America, LLC (BMW) is recalling certain model year 2005-2010 R1200GS and R1200RT, 2006-2010 R1200GS Adventure, 2007-2010 R1200R, 2007 R1200S and K1200R Sport, 2005-2007 R1200ST, 2008-2009 HP2 Megamoto, 2006 HP2 Enduro, 2008-2010 HP2 Sport, 2005-2008 K1200S, 2006-2008 K1200R, K1200GT, 2009-2011 K1300S, 2010-2011 K1300R, and 2009-2010 K1300GT motorcycles. In the affected motorcycles, the rear wheel mounting flange may crack if the rear wheel mounting bolts are over tightened. CONSEQUENCE: If the rear wheel mounting flange cracks, the mounting bolts may loosen and the rear wheel may not remain secured to the motorcycle, causing a loss of stability and increasing the risk of a crash. REMEDY: BMW will notify owners, and dealers will replace the existing aluminum rear wheel flange with a steel one, free of charge. The recall is expected to begin April 21, 2015. Owners may contact BMW customer service at 1-800-525-7417. NOTES: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov. Featured Gallery BMW HP2 Sport View 13 Photos News Source: National Highway Traffic Safety AdministrationImage Credit: BMW Recalls BMW Motorcycle bmw motorrad