2008 Bmw M3 Sedan**navigation**comfort Access**28k Miles**6 Speed** on 2040-cars

Auto blog

BMW already considering four cylinders for next M3

The cylinder count in BMW's M3 has fluctuated over the years. The original M3 debuted in 1985 packing a 2.3-liter inline-four, but subsequent models went with sixes until the outgoing generation upped the cylinder count to eight. With its latest model, BMW has dropped back to six cylinders with a pair of turbos taking the place of the extra pistons. But the next M3 sedan and M4 coupe could go back to the model line's roots with a four-cylinder engine.
Speaking with BMW M product manager Carsten Pries at the launch of the latest M3 and M4 in Portugal, our Aussie compatriots at Motoring.com.au report that "you could see a future [M3] powered by a four-cylinder engine." Offsetting the reduction in cylinders, the lighter engine would benefit the vehicle's weight and balance, thus enhancing performance.
We wouldn't expect the next M3 and M4 to lose any power in the process, though: Output in the M3 has only risen over the generations, from 192 horsepower in the four-pot original to 282 hp in the six-cylinder E36, 338 hp in the six-cylinder E46, 414 hp in the V8 E90 and 425 ponies in the new turbocharged six-cylinder F80 model. With that latter model having just debuted, it'll likely be a good six or seven years before the next version comes along, giving BMW plenty of time to settle on an engine - however many cylinders and turbochargers it has. In the meantime, you'll have to forgive us for taking a romp down M3 memory lane in the fresh gallery of images above.

BMW recalls over 76k 2012-2014 models over brake failure

Bimmerfest is reporting that BMW has notified the National Highway Traffic Safety Administration of its intention to voluntarily recall more than 75,000 3 Series, 5 Series, X1, X3 and Z4 models due to a possible loss of power brake assist that could result in the vehicles failing to stop. The recall affects 2012-2014 models equipped with either the N20 or N26 engine produced from May 2012 to August 2013. Until recall repairs have been performed, BMW dealers will discontinue selling or delivering any affected vehicles in their inventories.
The problem has been traced to restricted oil supply from the intake camshaft to the brake vacuum pump, which may cause the brake vacuum pump to fail, resulting in a loss of power brake assist. While the hydraulic brakes will still function, the driver must much apply greater pedal pressure and the distance required to stop the vehicle will increase.
BMW has reported three minor accidents with no confirmed injuries. According to Bimmerfest, drivers who encounter a braking problem should "pull the emergency brake and apply as much brake pedal pressure as possible. If your BMW has an electronic parking brake pull up and hold the switch to engage the brake." Drivers should then park in a safe location and contact BMW Roadside Assistance.

BMW to offer carbon fiber wheels in a year or two

The Citroën SM sat on the first set of production glass fiber and resin wheels in 1972 when parent company Michelin developed the exotic hoops in order to take the SM rallying. It wasn't until 2008 that we got the first all-carbon-fiber wheel for passenger cars in the form of a prototype model from Weds Sports in Japan that remained a prototype. Australian company Carbon Revolution followed that a year later with its CR-9 all-CF wheel, first introduced on the Shelby Ultimate Aero and now available for independent purchase for about $15,000 per set. BMW could be the first OEM to offer entire wheels in carbon fiber reinforced plastic in two years.
The wheels - either all-CFRP or using a CFRP rim and alloy spokes - were shown off during BMW's Innovation Days in Munich and are products of the development work done on its i-branded cars. The full-CFRP wheel is 35-percent lighter than a forged alloy wheel, the hybrid alloy and CFRP wheel is 25-percent lighter, making for a decent drop in unsprung rotating weight. As demonstrators during a tech day the wheels aren't yet in the pipeline for production and EU approval, but an article in Auto Express claims that they could be on the market as soon as two years from now.
Other possible parts include a full carbon fiber steering wheel and propeller shaft, the latter of which is coming as a single-piece component on the new M3 and M4. BMW is also talking up its use of secondary carbon fiber - waste material from i3 and i8 production - that can be used for items like IP support structures, seat frames and spare wheels in place of traditional metals like aluminum and magnesium. There's an excerpt of the Innovation Day press release below with more details.