Find or Sell Used Cars, Trucks, and SUVs in USA

1995 Bmw M3 Turbo 3.2l S52 Obd2 606rwhp 567rwtq Pump Gas on 2040-cars

Year:1995 Mileage:143000
Location:

Smyrna, Georgia, United States

Smyrna, Georgia, United States
Advertising:




Engine/Chassis


  • 143K on chassis, all VIN tags in place, front of car has been resprayed
  • ~11000 miles on build
  • OBDII block that has been O-Ringed
  • Wiseco Pistons, Ceramic and Teflon Coated
  • Pauter Rods
  • ARP Hardware
  • Cometic MLS Head Gasket
  • Webb 536/546 Turbo Camshafts
  • Ferrea Stainless Intake and Exhaust Valves
  • Ferrea Double Valve Springs
  • SPA Ceramic Coated Manifold
  • Garrett GTX35R with .82 Ceramic Coated Turbine Housing
  • Tial MV-R Wastegate with separate muffled dump
  • 2-340LPH in tank fuel pumps
  • New S54 3-row Radiator with new fan clutch
  • 3.5" Stainless Steel Downpipe/Cat/Midpipe to 3" Stainless Steel Exhaust with Stainless Magnaflow muffler, all sections V-Band
  • Separate wastegate dump with small muffler
  • New ABS Unit at 100K
  • New windshield
  • New Battery


Drivetrain


  • Southbend Stage 5 Clutch, new at build
  • New Clutch Master Cylinder
  • New Clutch Slave Cylinder
  • E32 750il 210mm 3.15 LSD
  • Freshly serviced driveshaft (new guibo, cbs, u-joint)


Suspension


  • TRM E36 Coilovers
  • TRM Camber Plates
  • TRM Springs 670F 895R
  • Turner Motorsports Sway Bars 30mm/24mm
  • Powerflex bushings and RTAB
  • Front control arms and bushings replaced at 95K
  • Z3 linear power steering rack



Lighting




Interior


  • Fully Functioning A/C
  • UUC Short Shifter
  • UUC Polyurethane Transmission Mounts
  • Rogue weighted Shift Rod
  • Everything functions as delivered from factory (cruise control not hooked up)
  • Leather in great shape, no rips or tears

Wheels/Tires


  • 2 sets of ASA 17x9's Silver set with Nitto NT-01 255/40-17 (Car hooks up and launches well with these), 
  • Black center set with Fuzion ZRi 255/40-17
  • Black center wheels brand new, Silver center wheels have a little brake dust corrosion but great shape



Copy and Paste in your Browser for Detailed Pics:

http://s1089.photobucket.com/user/cgmeredithjr/library/1995%20BMW%20M3%20Turbo?sort=3&page=1


Cleve 404-226-9766

Auto Services in Georgia

ZBest Cars ★★★★★

New Car Dealers, Used Car Dealers, New Truck Dealers
Address: 3280 Commerce Ave, Avondale-Estates
Phone: (888) 862-8501

Youmans Chevrolet Co ★★★★★

Auto Repair & Service, New Car Dealers, Used Car Dealers
Address: 2020 Riverside Dr, Elko
Phone: (478) 746-2020

Wren`s Body Shop ★★★★★

Auto Repair & Service, Automobile Body Repairing & Painting, Wheels-Aligning & Balancing
Address: 6402 Fairburn Rd, Douglasville
Phone: (770) 942-5642

Wholesale Tire & Wheel Co ★★★★★

Auto Repair & Service, Tire Dealers
Address: 620 General Courtney Hodges Blvd, Perry
Phone: (478) 987-4794

Walton Tire Co ★★★★★

Auto Repair & Service, Automobile Parts & Supplies, Tire Dealers
Address: 290 Lee Byrd Rd, Winder
Phone: (770) 466-4447

TJ Custom Muffler & Brake ★★★★★

Auto Repair & Service, Mufflers & Exhaust Systems, Brake Repair
Address: 3998 Center Hill Church Rd, Monroe
Phone: (770) 554-4496

Auto blog

BMW discussing supercar collaboration with McLaren

Mon, Sep 21 2015

BMW is reportedly considering a new halo supercar. But rather than go it alone, word has it that the Bavarian automaker is discussing a potential partnership with McLaren to make the idea a reality. This according to Britain's Car magazine, which suggests that negotiations are well underway. The proposal would see the BMW supercar based on the same architecture that will to underpin Woking's P16 project that's set to replace current 650S. Rather than use the 3.8-liter twin-turbo V8 that McLaren developed together with Ricardo, the Bimmer version would use Munich's own engine: a 4.0-liter V8 with quad turbochargers – two conventional spools and two more electrically driven chargers. Their combined effect would net an expected 750 horsepower. Further differentiations on McLaren's carbon monocoque architecture for use in the BMW would include custom bodywork, aerodynamics, and interior fitments to include a unique instrument panel. Production, however, would be handled at the McLaren Production Centre in Woking, to the tune of several hundred units per year. The project would take the place of several aborted programs undertaken internally at BMW. One called for an entirely unique supercar developed in-house, referred to internally as the M100. When that project was aborted so that BMW could concentrate on the i sub-brand, BMW's own skunkworks shifted its focus to developing a more performance-focused version of the i8, known by some as the i8 CSi. When that project was canned as well, discussions with McLaren commenced. It wouldn't be the first time BMW would outsource development of its own supercar, or even the first time BMW would collaborate with McLaren on such a project. Initial development work on the original M1 in the 1970s was undertaken by Lamborghini before being taken in-house. And, of course, BMW provided the engine for the legendary McLaren F1. Meanwhile McLaren performed a similar function for Mercedes-Benz with the SLR, demonstrating Woking's experience in building flagship supercars for German automakers. This latest project could suffer the same fate as the M100 and i8 CSi programs. But if it is approved, it could yield both coupe and convertible versions, with the first slated to surface at the Frankfurt Motor Show in 2017 and reach dealerships in 2019.

BMW makes X7 in Spartanburg official

Fri, 28 Mar 2014

BMW has made it official - there will be a flagship crossover called X7, and it will be built right here in the US of A. The announcement was made today, confirming rumors of the new model at the Spartanburg, SC factory that broke earlier this week.
"Plant Spartanburg was built to enhance and expand the BMW lineup, underscoring the BMW Group commitment to the United States" said Dr. Norbert Reithofer, chairman of the BMW board of management in a statement. "In addition to the X3, X5, X6, and the new X4, we are today announcing another all-new, larger X model to be manufactured exclusively at this plant for our world markets: the X7."
BMW will spend $1 billion by 2016 upgrading its South Carolina factory, which already produces the X3, X5 and X6. The plant is currently capable of producing 300,000 units per year, but with the big investment from BMW, capacity will climb to 450,000 units. 800 jobs will be added as a result of the investment and new and upcoming models.

BMW Concept Active Tourer Outdoor enjoys a day in the sun

Wed, 10 Jul 2013

This BMW Concept Active Tourer has evolved for the nature and cycling set and premiered at OutDoor Friedrichshafen, a trade fair in held this month in Germany. The sturdy wagon is tweaked with new materials, accessories and ConnectedDrive features for those who do a lot of their living under the sky as opposed to inside their cars.
Under the hood is the same plug-in hybrid drive system we've were introduced to in 2012, featuring a transversely-mounted, 1.5-liter turbocharged three-cylinder engine paired with an electric motor and a battery pack under the rear compartment floor. Total output is 190 horsepower and 147 pound-feet of torque headed to the front wheels, a claimed time from zero to 62 of under eight seconds, a pure electric range of up to 19 miles, a top speed of 124 miles per hour and claimed fuel economy of around 95 US miles per gallon.
The space behind the rear seats is the showcase, with a transformable compartment that can stow two bikes on built-in, retractable carriers. Remove the front wheel and seat from the bikes, then the frames can be locked into place using two rails and brackets. The wheels can be stowed in a holder attached to the right rear seat, the saddles can go into a compartment in the load floor. If you need to make a quick adjustment or a fix, you can do so since the bikes are aligned across the load bay.