650i Gran 6 Series New 4 Dr Sedan Automatic Gasoline 4.4l 8 Cyl Deep Sea Blue M on 2040-cars

Auto blog

Why are all US-bound BMW i3 EVs with range extenders stuck at port?

The first BMW i3 EVs have been delivered in the US, but in a quirk of the rules, none of them have been the range-extended versions. Long-time BMW electric vehicle driver Tom Moloughney discovered this fact the hard way. His i3 REx has been sitting at a New Jersey port for over a week and he's getting impatient. The problem is something Moloughney calls a "Monroney Hold." So, instead of sitting there fuming, Moloughney did a bit of research and discovered that the problem is something he calls a "Monroney Hold." He says that "the EPA certification has not been completed so BMW doesn't have a Monroney label (window sticker) to post in the window before the car leaves the port, which is required by law. The range extender option changes (shortens) the car's electric range, and also requires an official MPG rating so BMW couldn't use the same Monroney label as they did for the all electric i3." You can read more on his website, but it turns out that the story isn't so simple. For one thing, the EPA testing has been finished. Washington State representative Chad Magendaz told Moloughney that he asked the EPA for an official statement and got the following from Linc Wehrly, Director of the Light-Duty Vehicle Center Compliance Division: "EPA tested the i3 REx and provided the results of that testing to BMW on May 13th. EPA is not aware of anything that would prevent BMW from importing the vehicles since May 13th." Then there's the official word from BMW. Spokesman Dave Buchko told AutoblogGreen that: We are moving as quickly as possible to release the first BMW i3 Range-Extender models to BMW i Centers. Receipt of test data from the EPA is one step, but not the final step, in the process of receiving certification from the EPA. Rules do not permit the release of vehicles for sale until EPA labels are finalized, produced and affixed to any vehicle. Barring any unforeseen delays, we expect that to happen by the end of this week. We have never certified a vehicle like this before. We are taking every precaution to make sure that everything is done in a timely, but more importantly correct manner. In that Monroney labels cannot be produced until the EPA certification process is complete, the characterization [of a "Monroney Hold"] is not technically incorrect, but there is more to it than that, as is often true in life. On a lighter note, BMW donated a loaded i3 to Brad Pitt's Make It Right charity foundation as a fundraiser. Read about that below.

2014 BMW X5 doesn't upset the formula

BMW has unveiled the 2014 X5, and fans of the company's CUV will find plenty familiar in the machine. The biggest change to the recipe comes in the form of the X5 sDrive35i, which is the first rear-wheel drive version of the high-riding five-door to date. Buyers will, of course, continue to be able to opt for all-wheel drive, and both models will get their thrust from a 3.0-liter, turbocharged inline six-cylinder engine. That powerplant makes 300 horsepower and 300 pound-feet of torque and is mated to an eight-speed automatic transmission. BMW says the combination is good enough to get the SUV to 60 miles per hour in around 6.2 seconds.
Those who require more thrust can step up to the more potent X5 xDrive50i with its twin-turbo 4.4-liter V8 engine. Drivers get to enjoy an extra 45 hp over the previous model, with final output up to 445 hp and 480 lb-ft of torque. Paired with an eight-speed automatic of its own, the engine can hustle the big X5 to 60 mph in 4.9 seconds.
The 2014 BMW xDrive35d continues to offer diesel power, though output has dropped 10 horsepower to 255 hp and 413 lb-ft of torque. Even so, BMW says the X5 diesel will be just as quick or quicker than the 2013 model. You can check out the full press release below for more information.

BMW M3 and M4 will rock 430 hp from twin-turbo six with standard manual [w/video]

We're not sure which spec we're most intrigued by for the new BMW M3 and M4: the twin-turbo six-cylinder with 430 horsepower and "far beyond" 369 pound-feet of torque, the 3,300-pound curb weight or the standard six-speed manual transmission with automatic throttle blipping on downshifts. That engine is fitted with both Valvetronic and Double-Vanos, twin-wire arc-spray coating in the cylinders instead of liners to save weight, a track-ready cooling system with additional radiators, a forged crankshaft, dry-sump lubrication and a magnesium oil sump. BMW says its "high revving concept" has a redline beyond 7,500 rpm.
In the M4, it will be pulling a coupe with "a weight of just under 1,500 kilograms," which is 3,300 pounds to you and me. That number is said to include no driver and 90 percent fuel, but we're still waiting on the exact number and specs. BMW says it's "around 80 kilograms lighter than a comparably equipped predecessor model," putting the power-to-weight ratio at something like 7.68 pounds per horsepower at the same time as it helps reduce fuel consumption by 25 percent. The use of carbon fiber reinforced plastics (CFRP) for the roof, drive shaft (with no center bearing), trunk and front strut brace, and forged aluminum for suspension components, have aided in the weight loss. This time around, the sedan - the M3 - will also get a CFRP roof.
The default option will be a six-speed manual.