Amazing Condition 2004 Bmw 545i on 2040-cars

Auto blog

BMW Recalls 1.6 Million 3 Series Cars For Air Bag Problem

DETROIT (AP) - BMW is expanding a recall of its most popular models to fix an air bag problem that is hitting much of the global auto industry. The German automaker says it will recall 1.6 million 3 Series cars from model years 2000 to 2006 across the world, including 574,000 in the U.S. The company said Wednesday that it's a precaution because other automakers using similar systems have reported problems. Air bag inflators in systems made by Takata Corp. can rupture. If that happens, the bags might not work properly, and shards could fly out and cause injury or death. The problem is responsible for millions of recalled vehicles during the past few years made by manufacturers such as Chrysler, Ford, Honda, Mazda, Nissan and Toyota. Here's a look at the long history associated with this problem, that affects millions of cars. BMW said it has no reports of problems in its vehicles. Dealers will replace the passenger-side front air bags. The new recall excludes 42,000 BMWs recalled in May 2013 for the same problem. The company says it is recalling all vehicles equipped with potentially faulty air bag systems regardless of where they were sold. In June, the U.S. National Highway Traffic Safety Administration began investigating air bags made by Takata, a Tokyo-based supplier of seat belts, air bags, steering wheels and other auto parts. The agency said it received six reports of air bags rupturing in Florida and Puerto Rico. Three people were injured in those cases. It had estimated 1.1 million vehicles in the U.S. could be affected, but the total is likely to climb. The government says it wanted to act quickly in warm states while it continues to investigate the issue. "Based on the limited data available at this time, NHTSA supports efforts by automakers to address the immediate risk in areas that have consistently hot, humid conditions over extended periods of time," the agency said in a statement. Takata said in a statement Tuesday that it is supporting the NHTSA investigation and its customers with technical analysis and replacement parts. "Our objective is to do all that is possible to ensure the safety and well-being of the public," the statement said. Related Gallery AOL Autos Test Drive: 2014 BMW 428i

Consumer Reports selling its road-tested roadsters [w/video]

Here's a chance to acquire a celebrity-owned vehicles, and this time at a discount instead of a premium. So the celebrity in this case is Consumer Reports, that magazine that could be equally adored and abhored by car enthusiasts. CR buys all of its test vehicles and usually finds willing second owners within its own ranks, but its opening its small used-car lot to the public. On the forecourt are four roadsters: an automatic 2012 Audi TT 2.0 TFSI Quattro S-Tronic with 6,600 miles for $36,500, a manual 2012 BMW Z4 sDrive28i with 8,400 miles for $45,000, a manual 2012 Mercedes-Benz SLK250 for $39,500 and a manual 2013 Porsche Boxster with 7,000 miles for $48,000.
Those numbers mean a savings of $9,000 to $10,000 before haggling - each car is listed with an "Asking price" so there could be some wiggle room if you show up with pockets full of dough and eyes full of serious intent. Since the money CR earns from the sales go back into the magazine's budget to buy more test cars, however, it probably won't take any oddball trades, so you can forget about getting any purchasing help from that track-day AMC Javelin project on blocks in the back yard.
The vehicles have been taken care of and spiffed up for sale; buyers will take delivery at the CR test track in East Haddam, Connecticut and get a tour of the facilities. While you're there they'll even take you on a lap around the track so you can feel how your car handles when driven by one of its testers. They will probably not help you with advice on which toaster and dehumidifier to buy - you'll still need to get a subscription for that. Have a look at the video below to see a day in the life of a CR test car.

New BMW i3-like Visio.M EV concept uses lightweight resin

It's not a new version of the BMW i3, but an updated version of a lightweight concept car from SABIC, BMW, the Technical University of Munich, Daimler and others does bear a certain resemblance to the well-designed plug-in city car. From the black "glass" in the hatch to the angled line tail lights to the up-and-down window line, you can see a sort of family resemblance (see an i3 comparison photo here). And, of course, they both have an electric powertrain. But the changes made to the new lightweight urban electric concept vehicle is more of an exercise in what's possible rather than a way to evolve the i3 and i8 into a broader i family of vehicles. Even so, what we see here is interesting, since SABIC found all sorts of new ways to take weight out of the car as part of the Visio.M (Visionary Mobility) project, which was first announced in 2012. Let's start with the window material, which as you might guess from the quotation marks above, is not made of glass but is instead SABIC's Lexan polycarbonate (PC) resin plastic. The lower weight (the PC helps shed about 29 pounds) adds two miles of range while the PC resin has better thermal conductivity compared to glass and so does even more because the HVAC system can be more efficient. According to SABIC's computational fluid dynamics analysis, an extra 9-10 miles of range, in fact. Without the battery, this concept weighs just 992 pounds. Remember, BMW already made a lot of weight-reduction measures in the i3 thanks to carbon fiber reinforced plastic, so to make the "glass" lighter would only help boost efficiencies on a production vehicle that uses a resin like this. Read more below. SABIC's LEXAN™ resin delivers weight savings and thermal efficiency for new ultra-lightweight electric car concept developed by BMW-led Visio.M Consortium Munich, October 20, 2014 Today, at the Technical University of Munich (TUM), BMW, Daimler, TUM scientists and a consortium of industry participants showcased a lightweight urban electric concept vehicle with various advances, including an all-plastic design of the car's windows. The windows are made of LEXAN resin, a polycarbonate (PC) material, and coating technologies from SABIC, a leading developer of PC glazing for automotive windows and many other thermoplastic solutions for the automotive industry.