2024 Bmw 5-series 530i Xdrive on 2040-cars

Auto blog

BMW mulled ten, eight, and six-cylinder engines for i8 before going hybrid

There's little doubt that the 2015 BMW i8 is one of the most radical and groundbreaking performance cars this industry has seen in a long time. From its unique carbon-intensive construction to its 1.5-liter, three-cylinder and electric motor plug-in powertrain to its concept-car appearance, the flagbearer for BMW's new i venture challenges the very notion of what it takes to be a supercar.
Yet apparently the i8 almost didn't do that at all. Yes, it probably still would've had innovative assembly techniques, serious performance and come-hither bodywork, but according to a new report in the Telegraaf, it was very nearly a much more conventional beast, drawing its power from a V10 engine. According to the report, that line of development never got much beyond the drawing board, but BMW engineers then shifted their focus to both V8 and six-cylinder motivation, going so far as to build prototype cars. The higher cylinder-count engines were eventually dropped altogether after BMW decided to turn the i8 into a hybrid, with the six-cylinder reportedly nixed due to heat management and weight issues. In the end, of course, BMW went with the PHEV powertrain that offers a total system output of 362 horsepower and 420 pound-feet of torque - plenty of thrust for this lightweight, all-wheel drive coupe while still enabling an incredible 94 miles to the gallon on the EU cycle. Regardless of how it turned out, it's still fascinating to think that BMW didn't have a much firmer conceptual idea of what it was after when it started the i8's development.
Here at Autoblog, we're genuinely thrilled about this new generation of greener hybrid super- and hypercars, a movement spearheaded by the i8, Porsche 918 Spyder, Ferrari LaFerrari and McLaren P1. But even so, our inner-gearheads can't help but wonder what might have been had BMW pursued a more conventional i8, either in place of, or in addition to, the car they did build. What do you think? Have your say in Comments.

BMW X4 reclaims dash of utility with Clemson student project [w/videos]

BMW seems willing to exploit every automotive niche it can find with creations like the four-door, 'crossover coupe' X4 and X6. Of course, these designs come with a compromise. That svelte fastback means that they just can't haul as much cargo as a more traditional, boxier hatchback. Fortunately, students at Clemson University's International Center for Automotive Research might have a novel solution: the engineering graduate program has turned the crossover into a unique pickup.
Dubbed Deep Orange 4 concept, this functional prototype has an enclosed cargo area with a sliding glass panel that opens up to expose a pickup bed if more room is needed. Think of it as the GMC Envoy XUV of German crossovers. This isn't just an X4 with its roof hacked off, though. The students actually started with an X3 and grafted on this top later in addition to the two barn doors for access to the bed.
To make this project even more impressive, this pickup-crossover could conceivably be produced. The graduate students conducted an in-plant analysis of BMW's manufacturing abilities and went back to the university to create a plan for a low-volume vehicle that could actually be built. "The students working on this phase of the project did an excellent job of keeping costs down while finding optimal integration opportunities," said Rich Morris, vice president of assembly at BMW Manufacturing, in the university's release.

Giles Taylor succeeds Ian Cameron as head of Rolls-Royce design

Back in the day, a Rolls-Royce looked pretty much the same as a Bentley, but with a different grille. Once BMW took over Rolls-Royce, however, it was faced with the challenge of visually separating itself from its former sister brand. And most would agree that it did so pretty well. But its cars have looked pretty much the same ever since. What Rolls-Royce needs, then, is a bit of a design shake-up. And that's just what this latest appointment could bring.
After a baker's dozen years as design director at Rolls-Royce (and twenty years designing for the BMW Group altogether), Ian Cameron is retiring from his post. In his place, Rolls-Royce has named Giles Taylor as its new director of design. In his new capacity, Taylor will report directly to BMW Group chief designer Adrian van Hooydonk, and be responsible for all design matters related to the Rolls-Royce brand and its products.
Taylor was promoted to the role from his previous position as head of exterior design for the marque, a position he's held for barely more than a year. We'll be eagerly watching to see what the veteran British car designer has in store for the future of Rolls-Royce. In the meantime you can read the full announcement below.