2010 I Xdrive Used 3l I6 24v Automatic Navi Awd Sedan Premium Rebuilt Salvage on 2040-cars

Auto blog

Toyota close to licensing deal with BMW for fuel cell technology

For over a year now, we've been hearing about a potential partnership between Toyota and BMW on everything from sports cars to lithium-ion batteries, but one of the first cooperative projects between these two automakers could bring Toyota's hydrogen fuel cell technology to a BMW vehicle. Reuters is reporting that an announcement is likely to be made as soon as later this week regarding a BMW fuel cell vehicle that could be in production by 2020 with a prototype running around by 2015.
The last we heard of Toyota's fuel cell technology, it was in the FCV-R Concept that we saw at the 2011 Tokyo Motor Show, but there is no word how far along in development this system is. If it does come to fruition, such a vehicle for BMW would build on the automaker's commitment to hydrogen that started with the Hydrogen 7, which unlike a fuel cell vehicle, simply ran on hydrogen fuel rather than converting it to electricity for use in motors. We're definitely interested where this Toyota/BMW tie up could be headed.

2014 BMW R NineT

BMW is taking a page from the Harley-Davidson playbook with its groundbreaking R NineT. A retro cafe racer with an urban hooligan twist, the bike is fully customizable from fork to exhaust. Of course, any motorcycle can be customized, but the fact that BMW has built its newest bike to encourage modification using parts that can be swapped with simple tools is a radical move for a motorcycle maker best known for its plug-and-play touring bikes.
To underscore exactly how radical, BMW has even partnered with custom heavy-hitter Roland Sands Design, which developed the initial concept for the bike and is now manufacturing a full line of parts and accessories for the R NineT, including radial valve covers ($950), retro racing saddles ($400-$420), radial gauge housing ($400) and a radial headlight bezel ($250), among other things, all of which can be swapped with a socket wrench or screwdriver instead of a hacksaw, wire cutters and TIG welder.
Alas, the bike I tested for two weeks was stock, so consider it a blank canvas.

BMW recalls over 76k 2012-2014 models over brake failure

Bimmerfest is reporting that BMW has notified the National Highway Traffic Safety Administration of its intention to voluntarily recall more than 75,000 3 Series, 5 Series, X1, X3 and Z4 models due to a possible loss of power brake assist that could result in the vehicles failing to stop. The recall affects 2012-2014 models equipped with either the N20 or N26 engine produced from May 2012 to August 2013. Until recall repairs have been performed, BMW dealers will discontinue selling or delivering any affected vehicles in their inventories.
The problem has been traced to restricted oil supply from the intake camshaft to the brake vacuum pump, which may cause the brake vacuum pump to fail, resulting in a loss of power brake assist. While the hydraulic brakes will still function, the driver must much apply greater pedal pressure and the distance required to stop the vehicle will increase.
BMW has reported three minor accidents with no confirmed injuries. According to Bimmerfest, drivers who encounter a braking problem should "pull the emergency brake and apply as much brake pedal pressure as possible. If your BMW has an electronic parking brake pull up and hold the switch to engage the brake." Drivers should then park in a safe location and contact BMW Roadside Assistance.